Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) client-ip=23.128.96.31;
Message-ID: <79a2006b-abca-4e06-b8a3-58411318b9d7@kernel.org>
Date:   Mon, 16 Oct 2023 07:27:26 +0200
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [Patch v2 6/6] tty: serial: 8250: Add support for MOXA PCIe
 boards to switch interface between RS422/RS485
Content-Language: en-US
To:     Crescent CY Hsieh <crescentcy.hsieh@moxa.com>,
        gregkh@linuxfoundation.org
Cc:     linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
References: <20231016033705.20669-1-crescentcy.hsieh@moxa.com>
 <20231016033705.20669-7-crescentcy.hsieh@moxa.com>
From:   Jiri Slaby <jirislaby@kernel.org>
Autocrypt: addr=jirislaby@kernel.org; keydata=
 xsFNBE6S54YBEACzzjLwDUbU5elY4GTg/NdotjA0jyyJtYI86wdKraekbNE0bC4zV+ryvH4j
 rrcDwGs6tFVrAHvdHeIdI07s1iIx5R/ndcHwt4fvI8CL5PzPmn5J+h0WERR5rFprRh6axhOk
 rSD5CwQl19fm4AJCS6A9GJtOoiLpWn2/IbogPc71jQVrupZYYx51rAaHZ0D2KYK/uhfc6neJ
 i0WqPlbtIlIrpvWxckucNu6ZwXjFY0f3qIRg3Vqh5QxPkojGsq9tXVFVLEkSVz6FoqCHrUTx
 wr+aw6qqQVgvT/McQtsI0S66uIkQjzPUrgAEtWUv76rM4ekqL9stHyvTGw0Fjsualwb0Gwdx
 ReTZzMgheAyoy/umIOKrSEpWouVoBt5FFSZUyjuDdlPPYyPav+hpI6ggmCTld3u2hyiHji2H
 cDpcLM2LMhlHBipu80s9anNeZhCANDhbC5E+NZmuwgzHBcan8WC7xsPXPaiZSIm7TKaVoOcL
 9tE5aN3jQmIlrT7ZUX52Ff/hSdx/JKDP3YMNtt4B0cH6ejIjtqTd+Ge8sSttsnNM0CQUkXps
 w98jwz+Lxw/bKMr3NSnnFpUZaxwji3BC9vYyxKMAwNelBCHEgS/OAa3EJoTfuYOK6wT6nadm
 YqYjwYbZE5V/SwzMbpWu7Jwlvuwyfo5mh7w5iMfnZE+vHFwp/wARAQABzSFKaXJpIFNsYWJ5
 IDxqaXJpc2xhYnlAa2VybmVsLm9yZz7CwXcEEwEIACEFAlW3RUwCGwMFCwkIBwIGFQgJCgsC
 BBYCAwECHgECF4AACgkQvSWxBAa0cEnVTg//TQpdIAr8Tn0VAeUjdVIH9XCFw+cPSU+zMSCH
 eCZoA/N6gitEcnvHoFVVM7b3hK2HgoFUNbmYC0RdcSc80pOF5gCnACSP9XWHGWzeKCARRcQR
 4s5YD8I4VV5hqXcKo2DFAtIOVbHDW+0okOzcecdasCakUTr7s2fXz97uuoc2gIBB7bmHUGAH
 XQXHvdnCLjDjR+eJN+zrtbqZKYSfj89s/ZHn5Slug6w8qOPT1sVNGG+eWPlc5s7XYhT9z66E
 l5C0rG35JE4PhC+tl7BaE5IwjJlBMHf/cMJxNHAYoQ1hWQCKOfMDQ6bsEr++kGUCbHkrEFwD
 UVA72iLnnnlZCMevwE4hc0zVhseWhPc/KMYObU1sDGqaCesRLkE3tiE7X2cikmj/qH0CoMWe
 gjnwnQ2qVJcaPSzJ4QITvchEQ+tbuVAyvn9H+9MkdT7b7b2OaqYsUP8rn/2k1Td5zknUz7iF
 oJ0Z9wPTl6tDfF8phaMIPISYrhceVOIoL+rWfaikhBulZTIT5ihieY9nQOw6vhOfWkYvv0Dl
 o4GRnb2ybPQpfEs7WtetOsUgiUbfljTgILFw3CsPW8JESOGQc0Pv8ieznIighqPPFz9g+zSu
 Ss/rpcsqag5n9rQp/H3WW5zKUpeYcKGaPDp/vSUovMcjp8USIhzBBrmI7UWAtuedG9prjqfO
 wU0ETpLnhgEQAM+cDWLL+Wvc9cLhA2OXZ/gMmu7NbYKjfth1UyOuBd5emIO+d4RfFM02XFTI
 t4MxwhAryhsKQQcA4iQNldkbyeviYrPKWjLTjRXT5cD2lpWzr+Jx7mX7InV5JOz1Qq+P+nJW
 YIBjUKhI03ux89p58CYil24Zpyn2F5cX7U+inY8lJIBwLPBnc9Z0An/DVnUOD+0wIcYVnZAK
 DiIXODkGqTg3fhZwbbi+KAhtHPFM2fGw2VTUf62IHzV+eBSnamzPOBc1XsJYKRo3FHNeLuS8
 f4wUe7bWb9O66PPFK/RkeqNX6akkFBf9VfrZ1rTEKAyJ2uqf1EI1olYnENk4+00IBa+BavGQ
 8UW9dGW3nbPrfuOV5UUvbnsSQwj67pSdrBQqilr5N/5H9z7VCDQ0dhuJNtvDSlTf2iUFBqgk
 3smln31PUYiVPrMP0V4ja0i9qtO/TB01rTfTyXTRtqz53qO5dGsYiliJO5aUmh8swVpotgK4
 /57h3zGsaXO9PGgnnAdqeKVITaFTLY1ISg+Ptb4KoliiOjrBMmQUSJVtkUXMrCMCeuPDGHo7
 39Xc75lcHlGuM3yEB//htKjyprbLeLf1y4xPyTeeF5zg/0ztRZNKZicgEmxyUNBHHnBKHQxz
 1j+mzH0HjZZtXjGu2KLJ18G07q0fpz2ZPk2D53Ww39VNI/J9ABEBAAHCwV8EGAECAAkFAk6S
 54YCGwwACgkQvSWxBAa0cEk3tRAAgO+DFpbyIa4RlnfpcW17AfnpZi9VR5+zr496n2jH/1ld
 wRO/S+QNSA8qdABqMb9WI4BNaoANgcg0AS429Mq0taaWKkAjkkGAT7mD1Q5PiLr06Y/+Kzdr
 90eUVneqM2TUQQbK+Kh7JwmGVrRGNqQrDk+gRNvKnGwFNeTkTKtJ0P8jYd7P1gZb9Fwj9YLx
 jhn/sVIhNmEBLBoI7PL+9fbILqJPHgAwW35rpnq4f/EYTykbk1sa13Tav6btJ+4QOgbcezWI
 wZ5w/JVfEJW9JXp3BFAVzRQ5nVrrLDAJZ8Y5ioWcm99JtSIIxXxt9FJaGc1Bgsi5K/+dyTKL
 wLMJgiBzbVx8G+fCJJ9YtlNOPWhbKPlrQ8+AY52Aagi9WNhe6XfJdh5g6ptiOILm330mkR4g
 W6nEgZVyIyTq3ekOuruftWL99qpP5zi+eNrMmLRQx9iecDNgFr342R9bTDlb1TLuRb+/tJ98
 f/bIWIr0cqQmqQ33FgRhrG1+Xml6UXyJ2jExmlO8JljuOGeXYh6ZkIEyzqzffzBLXZCujlYQ
 DFXpyMNVJ2ZwPmX2mWEoYuaBU0JN7wM+/zWgOf2zRwhEuD3A2cO2PxoiIfyUEfB9SSmffaK/
 S4xXoB6wvGENZ85Hg37C7WDNdaAt6Xh2uQIly5grkgvWppkNy4ZHxE+jeNsU7tg=
In-Reply-To: <20231016033705.20669-7-crescentcy.hsieh@moxa.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 16. 10. 23, 5:37, Crescent CY Hsieh wrote:
> MOXA PCIe boards have 4 serial interfaces and don't require additional
> stuff to switch between interfaces:
> 
> - RS232
> - RS422
> - RS485_2W (half-duplex)
> - RS485_4W (full-duplex)
> 
> By using ioctl command "TIOCRS485", it can switch between default
> interface and RS485 if supported.
> 
> That means, for RS422/RS485 board, it can switch between RS422 and
> RS485 by setting the flags within struct serial_rs485.
> 
> However, for the RS232/RS422/RS485 board, it can only switch between
> RS232 and RS485, there's no flag for switching interface into RS422.
> 
> This patch uses "SER_RS485_TERMINATE_BUS" to represent RS422 as a
> workaround solution.
> 
> Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com>
> ---
>   drivers/tty/serial/8250/8250_pci.c | 52 ++++++++++++++++++++++++++++++
>   1 file changed, 52 insertions(+)
> 
> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
> index 72dd27141801..e2e8a28242bc 100644
> --- a/drivers/tty/serial/8250/8250_pci.c
> +++ b/drivers/tty/serial/8250/8250_pci.c
> @@ -1976,6 +1976,10 @@ pci_sunix_setup(struct serial_private *priv,
>   #define MOXA_RS485_2W	0x0F
>   #define MOXA_UIR_OFFSET	0x04
>   
> +static const struct serial_rs485 pci_moxa_rs485_supported = {
> +	.flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS,
> +};
> +
>   static bool pci_moxa_is_mini_pcie(unsigned short device)
>   {
>   	if (device == PCI_DEVICE_ID_MOXA_CP102N	||
> @@ -1989,6 +1993,11 @@ static bool pci_moxa_is_mini_pcie(unsigned short device)
>   	return false;
>   }
>   
> +static bool pci_moxa_match_x1xx(unsigned short device)
> +{
> +	return (device & 0x0F00) == 0x0100;
> +}
> +
>   static bool pci_moxa_match_x3xx(unsigned short device)

I wonder if it made more sense to have only a single function like:

static bool pci_moxa_match(unsigned short device, unsigned short matching)
{
	return (device & 0x0F00) == matching;
}

and call:
pci_moxa_match(device, 0x0100)
pci_moxa_match(device, 0x0300)
?

Perhaps name the function better. According to what the second digit in 
the device ID in fact means.

>   {
>   	return (device & 0x0F00) == 0x0300;
> @@ -2016,6 +2025,36 @@ static int pci_moxa_set_interface(const struct pci_dev *dev,
>   	return 0;
>   }
>   
> +static int pci_moxa_rs485_config(struct uart_port *port,
> +				 struct ktermios *termios,
> +				 struct serial_rs485 *rs485)
> +{
> +	struct pci_dev *dev = to_pci_dev(port->dev);
> +	unsigned short device = dev->device;
> +	u8 mode = MOXA_RS232;
> +
> +	if (rs485->flags & SER_RS485_ENABLED) {
> +		/* Use SER_RS485_TERMINATE_BUS to represent RS422 as a workaround. */
> +		if (rs485->flags & SER_RS485_TERMINATE_BUS) {
> +			mode = MOXA_RS422;
> +		} else {
> +			if (rs485->flags & SER_RS485_RX_DURING_TX)
> +				mode = MOXA_RS485_4W;
> +			else
> +				mode = MOXA_RS485_2W;
> +		}
> +	} else {
> +		/*
> +		 * RS232 is not supported for those device IDs of
> +		 * MOXA PCIe boards match the pattern 0x*3**.

I am not native, but I can hardly parse this.

Maybe:
RS232 is not supported on MOXA PCIe boards with device IDs matching the 
pattern 0x*3**.
?

> +		 */
> +		if (pci_moxa_match_x3xx(device))
> +			return -EINVAL;

Perhaps EOPNOTSUPP?

> +	}
> +
> +	return pci_moxa_set_interface(dev, port->port_id, mode);
> +}
> +
>   static int pci_moxa_init(struct pci_dev *dev)
>   {
>   	unsigned short device = dev->device;

thanks,
-- 
js
suse labs