Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) client-ip=23.128.96.35;
Date:   Mon, 16 Oct 2023 11:58:44 -0700
From:   Bjorn Andersson <andersson@kernel.org>
To:     Robert Marko <robimarko@gmail.com>
Cc:     agross@kernel.org, konrad.dybcio@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller
Message-ID: <jxvpt2xo3fc2k7kflfsdov6uxpjpgqpomgmfvfgxwytejvkcgu@xwnfrg7be6qi>
References: <20231004191303.331055-1-robimarko@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20231004191303.331055-1-robimarko@gmail.com>
Precedence: bulk

On Wed, Oct 04, 2023 at 09:12:30PM +0200, Robert Marko wrote:
> Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>

I padded the spi node to 8 digits, and applied the patch.

Thanks,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 38ffdc3cbdcd..484034e65f4f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
>  			status = "disabled";
>  		};
>  
> +		blsp_dma: dma-controller@7884000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x07884000 0x1d000>;
> +			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +		};
> +
>  		blsp1_uart1: serial@78af000 {
>  			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>  			reg = <0x078af000 0x200>;
> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
>  			status = "disabled";
>  		};
>  
> +		blsp1_spi1: spi@78b5000 {
> +			compatible = "qcom,spi-qup-v2.2.1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x78b5000 0x600>;
> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> +				 <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
>  		intc: interrupt-controller@b000000 {
>  			compatible = "qcom,msm-qgic2";
>  			reg = <0x0b000000 0x1000>,  /* GICD */
> -- 
> 2.41.0
>