Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.33 as permitted sender) client-ip=23.128.96.33;
Date:   Tue, 17 Oct 2023 17:06:03 +0200
From:   Miquel Raynal <miquel.raynal@bootlin.com>
To:     Frank Li <Frank.li@nxp.com>
Cc:     conor.culhane@silvaco.com, alexandre.belloni@bootlin.com,
        joe@perches.com, linux-i3c@lists.infradead.org,
        linux-kernel@vger.kernel.org, imx@lists.linux.dev
Subject: Re: [PATCH 6/6] i3c: master: svc: fix random hot join failure since
 timeout error
Message-ID: <20231017170603.5ef996c2@xps-13>
In-Reply-To: <ZS6d+mANtuhoAcuX@lizhi-Precision-Tower-5810>
References: <20231016153232.2851095-1-Frank.Li@nxp.com>
        <20231016153232.2851095-7-Frank.Li@nxp.com>
        <20231017163335.16770af2@xps-13>
        <ZS6d+mANtuhoAcuX@lizhi-Precision-Tower-5810>
Organization: Bootlin
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Hi Frank,

Frank.li@nxp.com wrote on Tue, 17 Oct 2023 10:45:14 -0400:

> On Tue, Oct 17, 2023 at 04:33:35PM +0200, Miquel Raynal wrote:
> > Hi Frank,
> >=20
> > Frank.Li@nxp.com wrote on Mon, 16 Oct 2023 11:32:32 -0400:
> >  =20
> > > master side report:
> > >   silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x=
020090c7, MERRWARN 0x00100000
> > >=20
> > > BIT 20: TIMEOUT error
> > >   The module has stalled too long in a frame. This happens when:
> > >   - The TX FIFO or RX FIFO is not handled and the bus is stuck in the
> > > middle of a message,
> > >   - No STOP was issued and between messages,
> > >   - IBI manual is used and no decision was made.
> > >   The maximum stall period is 10 KHz or 100 =CE=BCs.
> > >=20
> > > This is a just warning. System irq thread schedule latency is possibl=
e =20
> >=20
> > 							can be bigger =20
> > > bigger than 100us. Just omit this waring. =20
> >=20
> > I'm not sure this is the correct approach. It's a real issue but there
> > is not much we can do about it. Perhaps dev_err is too high, but I
> > would not entirely drop this message. Maybe a comment and turning the
> > message into a dbg printk would be more appropriate? =20
>=20
> The key is not message. It return true, means IBI/HJ thread will not run.

But why should the workers run if it's too late?

Thanks,
Miqu=C3=A8l