Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
From:   =?UTF-8?q?Andr=C3=A9=20Draszik?= <andre.draszik@linaro.org>
To:     linux-kernel@vger.kernel.org
Cc:     krzysztof.kozlowski@linaro.org, alim.akhtar@samsung.com,
        gregkh@linuxfoundation.org, jirislaby@kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [PATCH v2] tty: serial: samsung_tty: remove dead code
Date:   Thu, 19 Oct 2023 11:09:01 +0100
Message-Id: <20231019100901.4026680-1-andre.draszik@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

When support for various old platforms was removed in commit
1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"),
s3c24xx_serial_ops also became unused here because nothing sets port
type TYPE_S3C24XX anymore.

Remove s3c24xx_serial_ops and all the code that's unreachable now.

Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---
v2: update commit message
---
 drivers/tty/serial/samsung_tty.c | 105 -------------------------------
 1 file changed, 105 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 07fb8a9dac63..6b8d4b4402e9 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -64,7 +64,6 @@
 #define RXSTAT_DUMMY_READ (0x10000000)
 
 enum s3c24xx_port_type {
-	TYPE_S3C24XX,
 	TYPE_S3C6400,
 	TYPE_APPLE_S5L,
 };
@@ -128,8 +127,6 @@ struct s3c24xx_uart_dma {
 };
 
 struct s3c24xx_uart_port {
-	unsigned char			rx_claimed;
-	unsigned char			tx_claimed;
 	unsigned char			rx_enabled;
 	unsigned char			tx_enabled;
 	unsigned int			pm_level;
@@ -1166,29 +1163,6 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
 	}
 }
 
-static void s3c24xx_serial_shutdown(struct uart_port *port)
-{
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-
-	if (ourport->tx_claimed) {
-		free_irq(ourport->tx_irq, ourport);
-		ourport->tx_enabled = 0;
-		ourport->tx_claimed = 0;
-		ourport->tx_mode = 0;
-	}
-
-	if (ourport->rx_claimed) {
-		free_irq(ourport->rx_irq, ourport);
-		ourport->rx_claimed = 0;
-		ourport->rx_enabled = 0;
-	}
-
-	if (ourport->dma)
-		s3c24xx_serial_release_dma(ourport);
-
-	ourport->tx_in_progress = 0;
-}
-
 static void s3c64xx_serial_shutdown(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -1234,48 +1208,6 @@ static void apple_s5l_serial_shutdown(struct uart_port *port)
 	ourport->tx_in_progress = 0;
 }
 
-static int s3c24xx_serial_startup(struct uart_port *port)
-{
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	int ret;
-
-	ourport->rx_enabled = 1;
-
-	ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0,
-			  s3c24xx_serial_portname(port), ourport);
-
-	if (ret != 0) {
-		dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
-		return ret;
-	}
-
-	ourport->rx_claimed = 1;
-
-	dev_dbg(port->dev, "requesting tx irq...\n");
-
-	ourport->tx_enabled = 1;
-
-	ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0,
-			  s3c24xx_serial_portname(port), ourport);
-
-	if (ret) {
-		dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
-		goto err;
-	}
-
-	ourport->tx_claimed = 1;
-
-	/* the port reset code should have done the correct
-	 * register setup for the port controls
-	 */
-
-	return ret;
-
-err:
-	s3c24xx_serial_shutdown(port);
-	return ret;
-}
-
 static int s3c64xx_serial_startup(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -1692,8 +1624,6 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
 	const struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	switch (ourport->info->type) {
-	case TYPE_S3C24XX:
-		return "S3C24XX";
 	case TYPE_S3C6400:
 		return "S3C6400/10";
 	case TYPE_APPLE_S5L:
@@ -1753,27 +1683,6 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 			 unsigned char c);
 #endif
 
-static const struct uart_ops s3c24xx_serial_ops = {
-	.pm		= s3c24xx_serial_pm,
-	.tx_empty	= s3c24xx_serial_tx_empty,
-	.get_mctrl	= s3c24xx_serial_get_mctrl,
-	.set_mctrl	= s3c24xx_serial_set_mctrl,
-	.stop_tx	= s3c24xx_serial_stop_tx,
-	.start_tx	= s3c24xx_serial_start_tx,
-	.stop_rx	= s3c24xx_serial_stop_rx,
-	.break_ctl	= s3c24xx_serial_break_ctl,
-	.startup	= s3c24xx_serial_startup,
-	.shutdown	= s3c24xx_serial_shutdown,
-	.set_termios	= s3c24xx_serial_set_termios,
-	.type		= s3c24xx_serial_type,
-	.config_port	= s3c24xx_serial_config_port,
-	.verify_port	= s3c24xx_serial_verify_port,
-#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
-	.poll_get_char = s3c24xx_serial_get_poll_char,
-	.poll_put_char = s3c24xx_serial_put_poll_char,
-#endif
-};
-
 static const struct uart_ops s3c64xx_serial_ops = {
 	.pm		= s3c24xx_serial_pm,
 	.tx_empty	= s3c24xx_serial_tx_empty,
@@ -1836,7 +1745,6 @@ static void s3c24xx_serial_init_port_default(int index) {
 	port->iotype = UPIO_MEM;
 	port->uartclk = 0;
 	port->fifosize = 16;
-	port->ops = &s3c24xx_serial_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
 	port->line = index;
 }
@@ -1954,16 +1862,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		ourport->tx_irq = ret + 1;
 	}
 
-	switch (ourport->info->type) {
-	case TYPE_S3C24XX:
-		ret = platform_get_irq(platdev, 1);
-		if (ret > 0)
-			ourport->tx_irq = ret;
-		break;
-	default:
-		break;
-	}
-
 	/*
 	 * DMA is currently supported only on DT platforms, if DMA properties
 	 * are specified.
@@ -2083,9 +1981,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 			&ourport->drv_data->def_cfg;
 
 	switch (ourport->info->type) {
-	case TYPE_S3C24XX:
-		ourport->port.ops = &s3c24xx_serial_ops;
-		break;
 	case TYPE_S3C6400:
 		ourport->port.ops = &s3c64xx_serial_ops;
 		break;
-- 
2.40.1