Received: by 2002:a05:7412:251c:b0:e2:908c:2ebd with SMTP id w28csp172500rda; Sat, 21 Oct 2023 03:22:18 -0700 (PDT) X-Google-Smtp-Source: AGHT+IF1V47BwQ9Bdrt6ghMKFp0bwwbTE7R3FhF5twIEunaoCEkFKw+AsghUrP8Qe+7pM6qSfLUm X-Received: by 2002:a05:6a20:2451:b0:14d:f41c:435a with SMTP id t17-20020a056a20245100b0014df41c435amr4935968pzc.39.1697883737720; Sat, 21 Oct 2023 03:22:17 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1697883737; cv=none; d=google.com; s=arc-20160816; b=p2D7FzgaphOSK6baQ4sp5LQ/iqEC5uE1bepx8i6P4OW7Uh1wl9rlA63pXI3YodoQH5 tXPDKAxaC9nE7iv0NTlkwZYbX6jv8Bcqtk7ke3hC3qzG29XCirCz3G+r1sMxQZFUgPVR PouQH5FbAlPX89JIuRFK/WcYyqgcryIS/SMorgkTxYDzw0Ggz7H+/TnYYmS1vpPINNpy k/w12aL2k//eWbwb8DrZG8zaO/7bfQe/1a8SCyqh7sQcrOkKd07DDTt7UUVk696MuLOc 6X5NF3ntNSAVvmZFN/4JEeWtAcrEChuima52zkOYeiM6sVgWcRHkG/AJ4tsm9U3AX7SE HgQA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:reply-to:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=8iDFPxQjwVpMEWyuxlAH23eZHsSTcqJApJHlRpKCuuU=; fh=JmydfsEpM/I0MVLOgAFhcPLl5tX1OtN0jprCmjzm2k0=; b=Ok8/tk38aV/R4py9xS+7Qm0sSmhfmUuFcdTJai3pj2RANOdybaJcbhFoPfuU7jxU8L YThu73hS4pzyPx+A+8cI3/dJMFOQdC0JcIl+ch297xB6K6Yr8peol+F+ge5MiJHyHkc9 ddgZR8YNlbXxrT+0QEAicKNecFVvoDvqNl3htLmaiqFy2E3kTpHn+6Ooh7AFyJfsVVyn VLkURmm0m7uBitktVYiFX1SN++Eapbzz6jFKsasAV39fgYt4tbNcv1joviX1yTWKdh9t PSfdTFDGoJdBomTLNlgkE9sWCEfFEhQsg92gP4/4zo4zDCLCD/kDIIsnshe0OtaQUaDz dK7Q== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=H6gkRBpz; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from fry.vger.email (fry.vger.email. [23.128.96.38]) by mx.google.com with ESMTPS id r2-20020a632b02000000b005add209e106si3248351pgr.442.2023.10.21.03.22.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 21 Oct 2023 03:22:17 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=H6gkRBpz; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by fry.vger.email (Postfix) with ESMTP id 7F44F804B038; Sat, 21 Oct 2023 03:22:11 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at fry.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231324AbjJUKVA (ORCPT + 99 others); Sat, 21 Oct 2023 06:21:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55466 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230523AbjJUKUu (ORCPT ); Sat, 21 Oct 2023 06:20:50 -0400 Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2A446D5B; Sat, 21 Oct 2023 03:20:46 -0700 (PDT) Received: by smtp.kernel.org (Postfix) with ESMTPS id A5522C433D9; Sat, 21 Oct 2023 10:20:45 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1697883645; bh=qQUYOFRneXglnQjUZHXccRjcxl3amfsQW0dGZV7/QBw=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=H6gkRBpzZIcSiT2csgw5HEm/hrZfCbsNnahTbuCdH5ku9GUFgUE3pG5gbQs70Yh4/ hOHrOAtwDMI/7znd1x4i6uSLgP47U1mTzyBXFoGc2VJehVCtICQkhKrC9V/Hgu0OAk WoO3LDzXRDAypjuSEkVKe3jXziHREmJOJHFiSxjXVitviP3cUOU+cHf0WMzEsbpO7s /u5BPnGZ8I/DTD6PGs0F0b6ufX8paDit3Kg1Nk93l7twA7pnMyajG1xtP/JQwUj8em Iy4Kpu0HRE/DlCIiP+NE5PhSxRnw4vgOFHVTRrJm3sUrLifaAG33mM0uwF95zs6Va5 eAgsHQ8tylvsQ== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 89F0CC25B42; Sat, 21 Oct 2023 10:20:45 +0000 (UTC) From: Xilin Wu via B4 Relay Date: Sat, 21 Oct 2023 18:20:40 +0800 Subject: [PATCH v2 3/3] arm64: dts: qcom: Add device tree for Xiaomi Mi 11 Ultra MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231021-sakuramist-mi11u-v2-3-fa82c91ecaf0@gmail.com> References: <20231021-sakuramist-mi11u-v2-0-fa82c91ecaf0@gmail.com> In-Reply-To: <20231021-sakuramist-mi11u-v2-0-fa82c91ecaf0@gmail.com> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kees Cook , Tony Luck , "Guilherme G. Piccoli" Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-hardening@vger.kernel.org, Xilin Wu X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1697883643; l=31018; i=wuxilin123@gmail.com; s=20231021; h=from:subject:message-id; bh=XHLY8lvyckaP5vG1NEc+3Vw2fHAcQfJUfB/pIIlb1FI=; b=uzlffYw7mKvXTxOLilguae27z0+4PZbPiG8dBc0v++UIM9fGilrRkxkKSwkp9gFeiDAJ98hyF gtLIr1eOBcuCCTTiz9VDFPTTh7egDtsV1eD7JxYU7WkLwKaXGMK9jL0 X-Developer-Key: i=wuxilin123@gmail.com; a=ed25519; pk=edoFbrGewAWr5/CxptHll7XzvXBjYiN49RrEgipi1Cg= X-Endpoint-Received: by B4 Relay for wuxilin123@gmail.com/20231021 with auth_id=89 X-Original-From: Xilin Wu Reply-To: X-Spam-Status: No, score=-1.0 required=5.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,FREEMAIL_REPLYTO_END_DIGIT, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on fry.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (fry.vger.email [0.0.0.0]); Sat, 21 Oct 2023 03:22:11 -0700 (PDT) From: Xilin Wu Add support for Xiaomi Mi 11 Ultra. This commit brings support for: * Front and rear display panels (initialized by bootloader) * USB * UFS * PCIe0 * Thermistor sensors * ADSP/CDSP/Modem/SLPI * IR Transmitter * RTC provided by PMK8350 * Buttons To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8350-xiaomi-\ star.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 14.0.0 \ --os_patch_level 2099-12 \ -o boot.img-xiaomi-star Then, you can flash it to slot b on the device: // You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system_b \ vbmeta_system.img fastboot flash boot_b boot.img-xiaomi-star fastboot erase dtbo_b fastboot set_active b fastboot reboot Signed-off-by: Xilin Wu --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8350-xiaomi-star.dts | 1249 +++++++++++++++++++++++ 2 files changed, 1250 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d6cb840b7050..635bda47ebdf 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -225,6 +225,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-xiaomi-star.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8350-xiaomi-star.dts b/arch/arm64/boot/dts/qcom/sm8350-xiaomi-star.dts new file mode 100644 index 000000000000..6140e74fd2e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-xiaomi-star.dts @@ -0,0 +1,1249 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Xilin Wu + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" + +/* + * Delete following upstream (sm8350.dtsi) reserved + * memory mappings which are different on this device. + */ +/delete-node/ &pil_adsp_mem; +/delete-node/ &pil_slpi_mem; +/delete-node/ &pil_cdsp_mem; +/delete-node/ &pil_ipa_fw_mem; +/delete-node/ &pil_ipa_gsi_mem; +/delete-node/ &pil_gpu_mem; +/delete-node/ &pil_spss_mem; +/delete-node/ &pil_modem_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &pil_trustedvm_mem; +/delete-node/ &removed_mem; + +/ { + model = "Xiaomi Mi 11 Ultra"; + compatible = "xiaomi,star", "qcom,sm8350"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@ea600000 { + compatible = "simple-framebuffer"; + reg = <0 0xea600000 0 (1440 * 3200 * 4)>; + + width = <1440>; + height = <3200>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + + framebuffer1: framebuffer@eb79c000 { + compatible = "simple-framebuffer"; + reg = <0 0xeb79c000 0 (126 * 294 * 4)>; + + width = <126>; + height = <294>; + stride = <(126 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + reserved-memory { + pil_adsp_mem: memory@86100000 { + reg = <0 0x86100000 0 0x3900000>; + no-map; + }; + + pil_slpi_mem: memory@89a00000 { + reg = <0 0x89a00000 0 0x2f00000>; + no-map; + }; + + pil_cdsp_mem: memory@8c900000 { + reg = <0 0x8c900000 0 0x1e00000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8e700000 { + reg = <0 0x8e700000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8e710000 { + reg = <0 0x8e710000 0 0xa000>; + no-map; + }; + + pil_gpu_mem: memory@8e71a000 { + reg = <0 0x8e71a000 0 0x2000>; + no-map; + }; + + pil_spss_mem: memory@8e800000 { + reg = <0 0x8e800000 0 0x100000>; + no-map; + }; + + pil_modem_mem: memory@8f000000 { + reg = <0 0x8f000000 0 0x10000000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0 0xb0000000 0 0x400000>; + console-size = <0x200000>; + pmsg-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + + rmtfs_mem: memory@d6a00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xd6a00000 0 0x300000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + removed_mem: memory@d8800000 { + reg = <0 0xd8800000 0 0xa000000>; + no-map; + }; + + cont_splash_mem: memory@ea600000 { + reg = <0 0xea600000 0 0x2400000>; + no-map; + }; + }; + + thermal-zones { + skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + flash-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + usb-con-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wl-chg-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 5>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wifi-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 6>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + firmware-name = "qcom/sm8350/xiaomi/star/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l4c_uim1: ldo4 { + regulator-name = "vreg_l4c_uim1"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_uim2: ldo5 { + regulator-name = "vreg_l5c_uim2"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p96: ldo11 { + regulator-name = "vreg_l11c_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1280000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <976000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1872000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8350/xiaomi/star/cdsp.mbn"; + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* Zinitix BT541 or Cypress CYTTSP5 rear touchscreen @ 24 */ +}; + +&i2c6 { + clock-frequency = <400000>; + status = "okay"; + + /* AWINIC AW8697 vibrator @ 5a */ +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 15 GPIO_ACTIVE_HIGH>; + VA-supply = <&vreg_s10b_1p8>; + VP-supply = <&vph_pwr>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@42 { + compatible = "cirrus,cs35l41"; + reg = <0x42>; + interrupt-parent = <&tlmm>; + interrupts = <116 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 15 GPIO_ACTIVE_HIGH>; + VA-supply = <&vreg_s10b_1p8>; + VP-supply = <&vph_pwr>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&i2c15 { + clock-frequency = <1000000>; + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/sm8350/xiaomi/star/ipa_fws.mbn"; + status = "okay"; +}; + +&mpss { + firmware-name = "qcom/sm8350/xiaomi/star/modem.mbn"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm8350_gpios { + gpio-line-names = "NC", + "BuildID", + "NC", + "ProjectID", + "NC", + "KEY_VOLP_N", + "SP_ARI_POWER_ALARM", + "NC", + "NC", + "GND"; + + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350b_gpios { + gpio-line-names = "WIFI_THERM", + "WP_THERM", + "NC", + "NC", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC"; +}; + +&pm8350c_gpios { + gpio-line-names = "VDD_BOOST_5V_EN", + "NC", + "OTG_OVP_EN", + "WL_TXON", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + pm8350-skin-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350-cam-flash-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350b-usb-con-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350-quiet-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pmr735a-pa-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PMR735A_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350b-wl-chg-therm@5 { + reg = <5>; + io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350b-wifi-therm@6 { + reg = <6>; + io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8350_sdam_2 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + +&pmk8350_vadc { + channel@324 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_skin_therm"; + }; + + channel@325 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_cam_flash_therm"; + }; + + channel@327 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_quiet_therm"; + }; + + channel@836 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_usb_con_therm"; + }; + + channel@842 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_wifi_therm"; + }; + + channel@843 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_wl_chg_therm"; + }; + + channel@1098 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_pa_therm"; + }; +}; + +&pmr735a_gpios { + gpio-line-names = "PA_THERM0", + "PA_THERM1", + "NC", + "NC"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + firmware-name = "qcom/sm8350/xiaomi/star/slpi.mbn"; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + status = "okay"; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0>; + power-supply = <&vph_pwr>; + spi-max-frequency = <19200000>; + }; +}; + +&spi11 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + status = "okay"; + + /* STM FTS touchscreen */ +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; + gpio-line-names = "APPS_I2C_SDA", /* GPIO_0 */ + "APPS_I2C_SCL", + "FSA_INT_N", + "SEC_AMOLED_CVO_EN", + "WLC_PMIC_I2C_SDA", + "WLC_PMIC_I2C_SCL", + "SBU_UART_EN", + "WLC_INT_N", + "NC", + "INFARED_SPI_MOSI", + "NC", /* GPIO_10 */ + "NC", + "CAMW_AVDD_EN", + "AMOLED_VDDI_EN", + "CP_INT", + "SMART_PA_0_EN", + "CAM1_RESET_N", + "CAM5_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TP_RESET_N", + "TP_INT_N", + "LCD_RESET_N", + "WL_CP_EN_AP", + "WL_DET", + "CP_INT_S", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "SEC_AMOLED_RESET_DIS", /* GPIO_30 */ + "SEC_AMOLED_TP_INT", + "PM8008_1_IRQ", + "PM8008_1_RESET_N", + "CAMFD_AVDD_EN", + "SEC_AMOLED_VDDI_EN", + "SPKR_I2C_SDA", + "SPKR_I2C_SCL", + "FOD_INT_N1", + "FOD_RST", + "SMB_SPMI_DATA", /* GPIO_40 */ + "SMB_SPMI_CLK", + "WLS_CHARGE_CTRL", + "FORCED_USB_BOOT", + "SPKR_INT", + "LCD_ID_DET1", + "CHARGER_UART_TX", + "CHARGER_UART_RX", + "TP_SPI_MISO", + "TP_SPI_MOSI", + "TP_SPI_CLK", /* GPIO_50 */ + "TP_SPI_CS", + "FOD_SPI_MISO", + "FOD_SPI_MOSI", + "FOD_SPI_CLK", + "FOD_SPI_CS", + "NFC_SE_SPI_MISO", + "NFC_SE_SPI_MOSI", + "NFC_SE_SPI_CLK", + "NFC_SE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "CAMU_AVDD_EN", + "VBUS_NTC_CTRL", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "ADSP_FG_I2C_SDA", + "ADSP_FG_I2C_SCL", + "DISP_RATE", + "ERR_INT_N", + "TOF_SPI_MISO", + "TOF_SPI_MOSI", + "TOF_SPI_CLK", + "TOF_SPI_CS", + "HALL_OUT1", /* GPIO_80 */ + "USB_CC_DIR", + "MDP_VSYNC_P", + "SEC_AMOLED_TE_DIS", + "FLICKER_INT", + "HALL_OUT2", + "NFC_DWL_REQ", + "NFC_INT_REQ", + "WCD_RESET_N", + "ALS_INT_N", + "GPIO_BQ25970_MASTER_INT", /* GPIO_90 */ + "GYRO_INT", + "NC", + "CAMF_DVDD_EN", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "RF_CABLE_INT2", + "NC", + "TOF_IRQ", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "CAM_MCLK5", + "CAM3_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "SEC_AMOLED_TP_3P3_EN", + "SPKR_PA_INT", + "CAM2_RESET_N", + "ACCEL_INT", + "HAP_DRV_INT", + "SPKR_I2S_BCK", /* GPIO_120 */ + "SPKR_I2S_DIN", + "SPKR_I2S_WS", + "GPIO_BQ25970_SLAVE_INT", + "SPKR_I2S_DOUT", + "SEC_AMOLED_TP_RST", + "RF_CABLE_INT1", + "WLS_QUCK_EN", + "NC", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "NC", + "TP_3P3_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "UIM1_PRESENT", /* GPIO_140 */ + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", + "SM_RFFE1_DATA", + "SM_RFFE2_CLK", + "SM_RFFE2_DATA", + "SM_RFFE3_CLK", + "SM_RFFE3_DATA", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "SEC_AMOLED_VDDI_TP_EN", + "HAP_DRV_RSTN", + "NC", + "NC", + "NC", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "RF_CABLE_INT3", + "NC", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "HAP_SWR_RX_CLK", + "HAP_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "NC", + "CAMW_DVDD_EN", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_180 */ + "NC", + "WCD_SWR_TX_DATA2", + "ACC_I3C_SDA", + "ACC_I3C_SCL", + "SSC_SENSOR_I2C1_SDA", + "SSC_SENSOR_I2C1_SCL", + "NC", + "TCS3718_GPIO", + "NC", + "NC", /* GPIO_190 */ + "SSC_MAG_I2C_SDA", + "SSC_MAG_I2C_SCL", + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_default: qup-spi11-default-state { + pins = "gpio48", "gpio49", "gpio50", "gpio51"; + function = "qup11"; + drive-strength = <6>; + bias-disable; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vdd-hba-supply = <&vreg_l9b_1p2>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&usb_1 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; + maximum-speed = "high-speed"; + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; + + status = "okay"; +}; \ No newline at end of file -- 2.42.0