Received: by 2002:a05:7412:251c:b0:e2:908c:2ebd with SMTP id w28csp1762590rda; Tue, 24 Oct 2023 02:26:26 -0700 (PDT) X-Google-Smtp-Source: AGHT+IFSBxaeVArPa61x4WsdHakudwAbMY+Gcbzx4Fc1yF8tjsQWSP8c35TUAFG4N6+JBu/vLqni X-Received: by 2002:a05:6870:2183:b0:1e9:b2fe:9ea7 with SMTP id l3-20020a056870218300b001e9b2fe9ea7mr14914652oae.43.1698139586310; Tue, 24 Oct 2023 02:26:26 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1698139586; cv=none; d=google.com; s=arc-20160816; b=hP/jJhSmnHBOSN9u2b7NYhrelNVi3ES6O8RkwL/qYvFpshqG1+nTiCQYIfe5L4HQxS fVSppQ08dpiYgNMQH3H31BzlkMJCHCOyhsFVK0m4T32gnJLVydKYWDM7Ki/iv0rTNlwT Y0kAViiDOUMxBMGlK7KxhA9dcwzfsH1BBSg2okz+70G2Qr+2jCKGg8UEEwxS1v80GJMc sh1cYAtVLcnmWTyhqStBtQKfeDY86dmGRfT0XKWsCLjRcCqrt+YCoKxxFaWlTS+tJ2I3 agbqg2aBPsZynt1MXgunay6SppPXbmwuagfggvYert4N49c0iZ/iPgemzLQjJlLdcD8M tivg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=VRBNUBWDvC8PjaXpudIsup23k/J35U9YbvcI1paPU+Q=; fh=KBSMe52UcT9/dz5JJ0xyy9M3HSR6N5mQwb313RD2iz4=; b=x3v4WdnPWLevod/hVg8X8A/wWh5qkFVI6i8OSFQBXTK6WiCpWFdf+1sGBs8F7sOnIz hNSKM8fD2wceHVseUA4iUEm4kzwjb31nslZRGG4gVoafQuhHW8hbmEtqzv5DPdni30rY NP/1YN84PASRcXfRLdDEQ8mjUekSAPL/W0mj/isKr/RdGOcJGZoFtDFYArF9nZPeWK5w M19A6iCMbbjYcndXhta7ACH/3GWcJLBTSXNbS0ktvSknixJeEvx75AME1TVQ1s1H8ams baI2Rs7oWMjX6z2gvykAAbL24TIq9X/eYnuFF9wSHrJpeUE7XPJfZYAf4Eb16f4HRcLf OdpQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=d79JWtiu; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from howler.vger.email (howler.vger.email. [23.128.96.34]) by mx.google.com with ESMTPS id o14-20020a656a4e000000b005b34179728esi8397426pgu.237.2023.10.24.02.26.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Oct 2023 02:26:26 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=d79JWtiu; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by howler.vger.email (Postfix) with ESMTP id AD6C58083AF9; Tue, 24 Oct 2023 02:26:08 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at howler.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234152AbjJXJZj (ORCPT + 99 others); Tue, 24 Oct 2023 05:25:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59298 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234073AbjJXJZX (ORCPT ); Tue, 24 Oct 2023 05:25:23 -0400 Received: from mail-lf1-x132.google.com (mail-lf1-x132.google.com [IPv6:2a00:1450:4864:20::132]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EFBB0118 for ; Tue, 24 Oct 2023 02:25:18 -0700 (PDT) Received: by mail-lf1-x132.google.com with SMTP id 2adb3069b0e04-507bd644a96so6252582e87.3 for ; Tue, 24 Oct 2023 02:25:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698139517; x=1698744317; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=VRBNUBWDvC8PjaXpudIsup23k/J35U9YbvcI1paPU+Q=; b=d79JWtiukTsRgY+mXcRvEwSkisDVr0NLat6JwsFXaz+AzZ7QT/EfigX9efHXEOcfm4 0i6ecFIH4K09uDGbW/kryDEm1Tcjks23Hxf3u9y+RmZzI2nXGKdcLRtSWUGizQveHI3j kjerDd6/6+4SNXwsyxxsy338AoH/yKenMITtDSZeRkQy8nBgfcgBf0mGuxR8LQEtrZDA pSQCAexBgx4zra99wRILWl669l5mxSdI44yNFn/hwv6gOQUyWRrEC4y3YHlWHp5qhWdB DItEtkyxTqjNA8DCHouiSVHPvE48EtnUEzF1Zjh3Cv/TNYXVhH2GW7+Qiq6eWp0R5cF6 AxWw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698139517; x=1698744317; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VRBNUBWDvC8PjaXpudIsup23k/J35U9YbvcI1paPU+Q=; b=grFXvaxd3yHckdJllctId4q4Wd1nKNhH/jqqGUOwntquAfrkMBghWXqFL/1bFe2/Jy 86CEo3P7z4HO61Q0GWTEhZnhACbX20Gayz29JP9/g76fH+qYN80c9jUTVsiokD2YDiAa 7XzKVoCqKxQl5mCZjdxiDEo65TsfedL7cFT3amhyUbNGtqlKn8QLhIlScUNkCvVFS1Uu tj5LknPD95Ac4AAaPmY+sjW1QZ02QdSR7rBxCHF+KLWeL0GBN79/FnQerf43eaN9ouyc OOGlh8AsM+qH8EIHgwt2kdJn3R+VXjDeDf8AK7EAMxJH16GgV6PzxzaHzriqTMGGzU/d wKYg== X-Gm-Message-State: AOJu0YzylD7YPCe88v7HLUGytA6CliuX6pSTKLHavIVmp5bAuOSLIVBb 3PVFdH0EESDOUYBszPyj+KtY2w== X-Received: by 2002:ac2:5398:0:b0:506:926c:9b0d with SMTP id g24-20020ac25398000000b00506926c9b0dmr7927297lfh.20.1698139516764; Tue, 24 Oct 2023 02:25:16 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id c12-20020ac25f6c000000b004fbc82dd1a5sm2060246lfc.13.2023.10.24.02.25.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Oct 2023 02:25:16 -0700 (PDT) From: Linus Walleij Date: Tue, 24 Oct 2023 11:24:56 +0200 Subject: [PATCH net-next v6 4/7] ARM: dts: nxp: Fix some common switch mistakes MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231024-marvell-88e6152-wan-led-v6-4-993ab0949344@linaro.org> References: <20231024-marvell-88e6152-wan-led-v6-0-993ab0949344@linaro.org> In-Reply-To: <20231024-marvell-88e6152-wan-led-v6-0-993ab0949344@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.4 X-Spam-Status: No, score=-0.8 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on howler.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (howler.vger.email [0.0.0.0]); Tue, 24 Oct 2023 02:26:09 -0700 (PDT) Fix some errors in the Marvell MV88E6xxx switch descriptions: - switch0@0 is not OK, should be ethernet-switch@0 - ports should be ethernet-ports - port should be ethernet-port - phy should be ethernet-phy Reviewed-by: Andrew Lunn Signed-off-by: Linus Walleij --- arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts | 14 ++--- arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts | 70 ++++++++++++------------ arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts | 18 +++--- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts | 20 +++---- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts | 18 +++--- 5 files changed, 70 insertions(+), 70 deletions(-) diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec8957b..7e72f860c3c5 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ port@5 { sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a19..77492eeea450 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ mdio_mux_1: mdio@1 { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ fixed-link { }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ mdio_mux_2: mdio@2 { #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ fixed-link { }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ mdio_mux_4: mdio@4 { #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ port@2 { sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ port@3 { sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ port@4 { sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ port@5 { sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ port@6 { sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ port@7 { sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ port@9 { sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ mdio_mux_8: mdio@8 { #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ port@2 { sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ port@3 { sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ port@4 { sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ fixed-link { }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804ecaea..2a490464660c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9b7..078d8699e16d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ port@9 { }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de315..22c8f44390a9 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; -- 2.34.1