Received: by 2002:a05:7412:251c:b0:e2:908c:2ebd with SMTP id w28csp1882877rda; Tue, 24 Oct 2023 06:21:59 -0700 (PDT) X-Google-Smtp-Source: AGHT+IE+F5cuv9mfeChQ8xrBaGB+MjN06HeVZoSBHSo62pkfHO55zXEFnGfJGQ4NN5j7BJa4jxhn X-Received: by 2002:a05:6870:6b89:b0:1e9:a8ff:67e8 with SMTP id ms9-20020a0568706b8900b001e9a8ff67e8mr16593369oab.50.1698153718884; Tue, 24 Oct 2023 06:21:58 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1698153718; cv=none; d=google.com; s=arc-20160816; b=Cr2dwNhALtyLM3hg0PhcO5wt4n+ytaLD62MKIrou1Yol20VU4s9lX9M5p3vdwpZt0g H8y6pbbnT4Mxea+4armkQG4jZdPE/zcFgFBUx/ewhRbJifbkUKtatHN0xd5DDU/Ww2Gw XWQiyzNymh8ZvFZ/SLMQ7uzPTgVurwnnThRjp5jJnGRCnib+9G+0OSuxeXeYqk2rBheW Ivyi6l83UUGSx+Y9+67QC8AzlkI7t+HTmF9LmgWkbCA+2LnElq9dlUMQszywKP/MBn2z T1JMqTMc+iyuBRxY8EyC+KNa8vNT9RLrR9Hu537pDbnVfLuKxsTHOjIaPvJIj0nyrmbF SyKQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=VRBNUBWDvC8PjaXpudIsup23k/J35U9YbvcI1paPU+Q=; fh=KBSMe52UcT9/dz5JJ0xyy9M3HSR6N5mQwb313RD2iz4=; b=DO86wwhETOa42Z1IMk/V/TXIRTH04I2e2Rst6Hw89dNTI1aPpJxhbDWZYs925fjdXD nqkE4U58DGcs+5uKZLhpZjVGG1NUfcQN0qt9vlqLzoMLr1w+j4ujEJ13UxrMOKNsW4wk VfP/8ILGCjV3m4mu22oyXbPBXMJDdGhe8OEaAYGSxtRad5DalPxak3VJbH/SYqY42Otk cgWVJpsh7KL8F9ZSOgz+KLlF6uf+ISqbKL5azhwnEvkupI2nS9Q+pogdqWD8+fzrxEFC H/qTQU90UIBdNlxVI9+WsMMkmg6f6lNzBPUWV5Fm514Ghi9vC/kklWQp4cEETRWqxEp1 dHyA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jSmUCMqm; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from morse.vger.email (morse.vger.email. [23.128.96.31]) by mx.google.com with ESMTPS id o8-20020a656a48000000b00569fd44093fsi8641426pgu.230.2023.10.24.06.21.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Oct 2023 06:21:58 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) client-ip=23.128.96.31; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jSmUCMqm; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by morse.vger.email (Postfix) with ESMTP id ED58180A3F22; Tue, 24 Oct 2023 06:21:51 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at morse.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234502AbjJXNUz (ORCPT + 99 others); Tue, 24 Oct 2023 09:20:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39712 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234435AbjJXNUn (ORCPT ); Tue, 24 Oct 2023 09:20:43 -0400 Received: from mail-lj1-x232.google.com (mail-lj1-x232.google.com [IPv6:2a00:1450:4864:20::232]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2E0C4D7A for ; Tue, 24 Oct 2023 06:20:37 -0700 (PDT) Received: by mail-lj1-x232.google.com with SMTP id 38308e7fff4ca-2c5028e5b88so64591031fa.3 for ; Tue, 24 Oct 2023 06:20:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698153635; x=1698758435; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=VRBNUBWDvC8PjaXpudIsup23k/J35U9YbvcI1paPU+Q=; b=jSmUCMqm3veBhVrlICesax5twZiS8m0M8rd9372IsIzq58FJsowVpH9NdPbvGgMqPZ j8ooQJU9b6xuhRG2GGWbR2cggRC3nMNKxSxBPxIFrFo9grCgWVkwSDJFxxQ7UnoOxH4T BYdQjQ5akHCWbrWTQTPYY0WuX3D0faN/TUM2L8gtHJWoJf7UvqpBK56tdpgJVXv0/ksJ NN0vSK6hKadiI96+bCMJcu7N9h9rKEAy1P2Lc+byqmu68amLXmC1uqpfwWGmEGuDioA9 uqRDAIZaNYqFc0hcb5hjcmDzeEddSTyVi5A4bpPaCc7znMsGdZOQRVYElMxTjVk3IFKw dewg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698153635; x=1698758435; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VRBNUBWDvC8PjaXpudIsup23k/J35U9YbvcI1paPU+Q=; b=mt1FQU+2r5qW4I3mVDZPLAS7YAstYTmNaMJkwUz1dq2pLeNFT1Z9jZNNKlc4hTAsun YY1nAhKEULGVJElbop/siQ3HVl2FzCo3k+OLf9AeclKz8v6jJPOa22S+R+FowNcc+l/W EiL+XiS501OnEJqDq38qjh9+gfnUHeDvEI3R8I/LGo7+fFRPDKh35UTcnVjnKMi2r1KE +bZRWp5j0RrksQJaVXB44EOuRju1ZC3+mXKRmWqOJb0Q8unBrUoxBtoDqgDSx1vCM5y5 x7wr/iAKB1SHute33yRw2gkhkOiDsb0aTnZD5ErM1II1ecNWHNliw9OSFcv0dwcrmFc2 QtyQ== X-Gm-Message-State: AOJu0YxyzhnLU6DohWDOvzgH9jnQ1/5PFRhHehJu9eN37ER7mKtGSd6x 33g+sM6lLBVsfQo3hARLtD+umw== X-Received: by 2002:a05:6512:318f:b0:502:d743:8a6c with SMTP id i15-20020a056512318f00b00502d7438a6cmr11688990lfe.9.1698153635374; Tue, 24 Oct 2023 06:20:35 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id d5-20020a193845000000b00507ab956ab9sm2147365lfj.147.2023.10.24.06.20.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Oct 2023 06:20:34 -0700 (PDT) From: Linus Walleij Date: Tue, 24 Oct 2023 15:20:30 +0200 Subject: [PATCH net-next v7 4/7] ARM: dts: nxp: Fix some common switch mistakes MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231024-marvell-88e6152-wan-led-v7-4-2869347697d1@linaro.org> References: <20231024-marvell-88e6152-wan-led-v7-0-2869347697d1@linaro.org> In-Reply-To: <20231024-marvell-88e6152-wan-led-v7-0-2869347697d1@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.4 X-Spam-Status: No, score=-0.8 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on morse.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (morse.vger.email [0.0.0.0]); Tue, 24 Oct 2023 06:21:52 -0700 (PDT) Fix some errors in the Marvell MV88E6xxx switch descriptions: - switch0@0 is not OK, should be ethernet-switch@0 - ports should be ethernet-ports - port should be ethernet-port - phy should be ethernet-phy Reviewed-by: Andrew Lunn Signed-off-by: Linus Walleij --- arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts | 14 ++--- arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts | 70 ++++++++++++------------ arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts | 18 +++--- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts | 20 +++---- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts | 18 +++--- 5 files changed, 70 insertions(+), 70 deletions(-) diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec8957b..7e72f860c3c5 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ port@5 { sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a19..77492eeea450 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ mdio_mux_1: mdio@1 { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ fixed-link { }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ mdio_mux_2: mdio@2 { #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ fixed-link { }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ mdio_mux_4: mdio@4 { #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ port@2 { sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ port@3 { sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ port@4 { sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ port@5 { sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ port@6 { sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ port@7 { sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ port@9 { sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ mdio_mux_8: mdio@8 { #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ port@2 { sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ port@3 { sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ port@4 { sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ fixed-link { }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804ecaea..2a490464660c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9b7..078d8699e16d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ port@9 { }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de315..22c8f44390a9 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; -- 2.34.1