Received: by 2002:a05:7412:251c:b0:e2:908c:2ebd with SMTP id w28csp2387589rda; Wed, 25 Oct 2023 00:50:31 -0700 (PDT) X-Google-Smtp-Source: AGHT+IEau7u7snsH5F7sLm5F6XRVT8Ttq8nM9Qnhc3Il4zF/C2jeX81pNSEfIj8UrhpwAB0PTzjz X-Received: by 2002:a25:7602:0:b0:d9a:cd50:b99a with SMTP id r2-20020a257602000000b00d9acd50b99amr14457254ybc.12.1698220231097; Wed, 25 Oct 2023 00:50:31 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1698220231; cv=none; d=google.com; s=arc-20160816; b=lmva2Bq7Yqovc7B6Vi2o0NWRWlN7j9lfNuWXTK90X9+9lDe+5Ydrsvi3sU7HbwAUsu 0eJRZpzfDSIJtBM69dmH7aXdmOrjDQOk/ql/2CxoZFU/T7tP1XQ8F47wKQIvBJW6l5n8 ZCTeAZUHcSx7AygHjCpBAfWh4vwkfevsaMkEzZ8IYC8PPNrWsU4tn6AwuBdkmbVI0w3J kZ2nGxuP3Gu+fuSjugDBrd2/fJ1mI8/ZpxjAcZvdPQEb+kRZHoGRygY4MYLaerzM5Lzl d2Q5r+npS3h8QuFK8YM0WsF32mSsgMtJvu1s92WbHoSa6dU43VDWovmbCJxQyuOfoEwR 28KA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=Z1i73Bz9hhakXjCt6zrLZSBiPMcqo+OvQi9RFs4QPQE=; fh=sCatITcX+XZ6LvD/s0wz2dK14I7uXwYSPaj41KpRZ1k=; b=TO+CmvcppVGP81J1FFX4isdA2/Q1G6y28mTbAKnRVn3cWXEsyYGdNNoW5zZFYTsmlU Gnz+0GTWBM2UMCHxfiBvlOVjTrX8sK2tO3viB1cE1+Mw5bDNRKrDMeHlXN+gzdkfJC45 Q5otN8Q+ng7oPWFDTcabjy3+T9CoORnjNH39o6lJLnFR1RWx8PQ1Qv1qx9mtrN7zYML3 0kzhxvHdLcL+A9gjdcZ0frKxujpe70hssJyD5+QE4MxyEHMw0wtpjzUVcP1Hy9U1Hu3x c2anPO9J6p8CQLipj7RaxCHJyBvgVul+kfNdg7zDnhy3VsSrNmSFh+4kQAjyLGIR3zP6 8GHw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=o3NoH91R; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from groat.vger.email (groat.vger.email. [2620:137:e000::3:5]) by mx.google.com with ESMTPS id j132-20020a25558a000000b00da053d27cabsi2481596ybb.601.2023.10.25.00.50.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 25 Oct 2023 00:50:31 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=o3NoH91R; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by groat.vger.email (Postfix) with ESMTP id 396248053F90; Wed, 25 Oct 2023 00:50:23 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at groat.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233963AbjJYHtQ (ORCPT + 99 others); Wed, 25 Oct 2023 03:49:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42080 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232814AbjJYHs7 (ORCPT ); Wed, 25 Oct 2023 03:48:59 -0400 Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 69A421FE7 for ; Wed, 25 Oct 2023 00:47:56 -0700 (PDT) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2c59a4dd14cso14685911fa.2 for ; Wed, 25 Oct 2023 00:47:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698220074; x=1698824874; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Z1i73Bz9hhakXjCt6zrLZSBiPMcqo+OvQi9RFs4QPQE=; b=o3NoH91R7hM7t1vSasYklwJEbv+rSW8LDPMSFlPpfNEaoPSHOQmgaypXPfX/7HQStY rnW2iXRhK/TCT5793mg+JQ2eoBaIFwfqL4VBTXhnqC+M/nMhTCjW7YTRTCAdYoTeS7lR zD+zdpts5HzChbwhnx0v+d1mye4pLBf6YO/C2Di4TmhsRSuvTbiLCgjr8mFChfTRmF1G KJOfppcfAUfxxIVnrd0w9d5yM34TTuRjUqO5xe6dp7Nd1PFT4kXLRaMBiDLn8XMeYGOz RKmbP+KMzvLrTxoQSeQjqNMB8iEs5GToNMpsf4ybAlr3ZrI/epp8Juz+JiwwyamMp0g9 ayGw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698220074; x=1698824874; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Z1i73Bz9hhakXjCt6zrLZSBiPMcqo+OvQi9RFs4QPQE=; b=DW0ZsyahGHCdyUx012ZAHjLW3v0dSCAM8YETCEnxmpcXaS4Tku3VWv/GrikFTYT2DI uS/D5LiatXVeX3hshpGDVTT6IcxD14JyUibz3lk2ue3+hchvIwNPBhen9TqYSQyvZcEv wg1M/qrQimv+8l1EZaF0d86BPuuoBI9vBuDG2uH8zZSPrmAjH7sgko27VkNgCSpCOBeY cDLRk2nwcidF+NfQ5PE8LOg7u57O6KgGmpXhRsiQhtFQM5UBEyzb49cml6Ru9hPQQVi0 YI7xqKHIkq8feBmpUQM2lFjEA1PAivW4Wfr5lEj0eUpJ3GVHbNrkMwTN+YPjJbusT5Vq XyXg== X-Gm-Message-State: AOJu0Yx+palwbWOhPY+BHqhdfDCx/ierZr+x+h8QH0tcaqGyWHHtNCJD 6akyqBh+MahgtmLEp5crzMC+rQ== X-Received: by 2002:a2e:8854:0:b0:2b9:e6a0:5c3a with SMTP id z20-20020a2e8854000000b002b9e6a05c3amr11059198ljj.48.1698220074123; Wed, 25 Oct 2023 00:47:54 -0700 (PDT) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id p5-20020a05600c358500b004053a6b8c41sm13900970wmq.12.2023.10.25.00.47.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 25 Oct 2023 00:47:53 -0700 (PDT) From: Neil Armstrong Date: Wed, 25 Oct 2023 09:47:46 +0200 Subject: [PATCH RFC 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231025-topic-sm8650-upstream-dt-v1-6-a821712af62f@linaro.org> References: <20231025-topic-sm8650-upstream-dt-v1-0-a821712af62f@linaro.org> In-Reply-To: <20231025-topic-sm8650-upstream-dt-v1-0-a821712af62f@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=92996; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=C1xIuZI5dzbHKWzLD92fQROvrbwneOxrMzSShYh17fc=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlOMgh/9Nru56VQ024UnXYZV7T4/0yWmza9oHZFRK7 1m+ZFqGJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZTjIIQAKCRB33NvayMhJ0Z/WD/ 9bVaYIB4m308kzlYy18Wmt6ZC9rMsX0UKpuzIUxpaR4uF9rskGyWrQ/ONmTKmjhULN7XxH3xkrdLYx TLicSE8mcYINy8PNx/pnsDRMXVw07pk71fOwwb2+9SYeYe60nrA/1Bh5euqUqdAgkHUnkqcJ3umQrJ BFIPr8TgL5z8OBe3ORkGzoT8z9YuFggEYgx3xDTDp++zuzRBWtqNF9gASs0b4FNrCdF4oc/2YuBBB0 fvuKYqDE2Uwu7IWPbu3nX5F6nxTPxNcsXirGJTrDf3RUoPPnZRCBrNDNsTVXn8UN8Vt9PpNZhwKzL6 BSoJOKFTeycxPBKfdsxpkcrfYZK7sH8Mgl9wcJ7iOtET1SbSRJ/JV1TCwS0fjBRJHMjBNjfyoLnbpF Sciy6RJrgerCCUIckKz2ixDSXnBO4oEoj0hbUJcd/EYY6i0di0R3ho4qea0iywBpj6gaUt+qIFlQaN Xrr1F9Ka0ENrO6c9P2HgJZTH7aMBxRRt6/FzEtIm7K/U0UJhS2aYOKBwD3dHm3dogTf4vnbQk3XwSA uRKcQ9NoeWaW3qBiWTKQBHqxjCJ8mKDYKCfFU90ntH6a8YO9laDCv63Gk7e7sqiKbAXt+2TViPtnEz W11QAPj7qYSqvFTf1dvTa4sSu6Egx0J/SNi0wMNsiCH4tK3z5zx9N49AP9Wg== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE X-Spam-Status: No, score=-0.8 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on groat.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (groat.vger.email [0.0.0.0]); Wed, 25 Oct 2023 00:50:23 -0700 (PDT) Add Hardware nodes that depends on an interconnect property to be valid. The includes: - all QUP i2s/spi nodes - PCIe - UFS - SDHCI - Display - HWMON Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 3348 +++++++++++++++++++++++++++++++--- 1 file changed, 3083 insertions(+), 265 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index bbebe15437aa..0b5ff539959a 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -57,6 +58,11 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { clock-mult = <1>; clock-div = <2>; }; + + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; }; cpus { @@ -363,9 +369,22 @@ CLUSTER_SLEEP_1: cluster-sleep-1 { firmware { scm: scm { compatible = "qcom,scm-sm8650", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; }; }; + clk_virt: interconnect-0 { + compatible = "qcom,sm8650-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8650-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + memory@a0000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -626,6 +645,95 @@ llcc_lpi_mem: llcc-lpi@ff800000 { }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <435>, <428>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -641,13 +749,13 @@ gcc: clock-controller@100000 { clocks = <&bi_tcxo_div2>, <&bi_tcxo_ao_div2>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>; + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; #clock-cells = <1>; #reset-cells = <1>; @@ -712,240 +820,2195 @@ qupv3_id_1: geniqup@8c0000 { status = "disabled"; - uart15: serial@89c000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x0089c000 0 0x4000>; + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; - interrupts = ; + interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; clock-names = "se"; - pinctrl-0 = <&qup_uart15_default>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00a00000 0 0x60000>; + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; + interrupts = ; - dma-channels = <12>; - dma-channel-mask = <0xc>; - #dma-cells = <3>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; - iommus = <&apps_smmu 0xb6 0>; - dma-coherent; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - status = "disabled"; - }; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; - rng: rng@10c3000 { - compatible = "qcom,sm8650-trng", "qcom,trng"; - reg = <0 0x010c3000 0 0x1000>; - }; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; - ice: crypto@1d88000 { - compatible = "qcom,sm8650-inline-crypto-engine", - "qcom,inline-crypto-engine"; - reg = <0 0x01d88000 0 0x8000>; + #address-cells = <1>; + #size-cells = <0>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - }; + status = "disabled"; + }; - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0 0x01f40000 0 0x20000>; + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; - #hwlock-cells = <1>; - }; + interrupts = ; - tcsr: clock-controller@1fc0000 { - compatible = "qcom,sm8650-tcsr", "syscon"; - reg = <0 0x01fc0000 0 0xa0000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; - clocks = <&rpmhcc RPMH_CXO_CLK>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - #clock-cells = <1>; - #reset-cells = <1>; - }; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; - gpucc: clock-controller@3d90000 { - compatible = "qcom,sm8650-gpucc"; - reg = <0 0x03d90000 0 0xa000>; + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; - clocks = <&bi_tcxo_div2>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #address-cells = <1>; + #size-cells = <0>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; + status = "disabled"; + }; - dispcc: clock-controller@af00000 { - compatible = "qcom,sm8650-dispcc"; - reg = <0 0x0af00000 0 0x20000>; + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; - clocks = <&bi_tcxo_div2>, - <&bi_tcxo_ao_div2>, - <&gcc GCC_DISP_AHB_CLK>, - <&sleep_clk>, - <0>, /* dsi0 */ - <0>, - <0>, /* dsi1 */ - <0>, - <0>, /* dp0 */ - <0>, - <0>, /* dp1 */ - <0>, - <0>, /* dp2 */ - <0>, - <0>, /* dp3 */ - <0>; + interrupts = ; - power-domains = <&rpmhpd RPMHPD_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - status = "disabled"; - }; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sm8650-snps-eusb2-phy", - "qcom,sm8550-snps-eusb2-phy"; - reg = <0 0x088e3000 0 0x154>; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; - clocks = <&tcsr TCSR_USB2_CLKREF_EN>; - clock-names = "ref"; + #address-cells = <1>; + #size-cells = <0>; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + status = "disabled"; + }; - #phy-cells = <0>; + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; - status = "disabled"; - }; + interrupts = ; - usb_dp_qmpphy: phy@88e8000 { - compatible = "qcom,sm8650-qmp-usb3-dp-phy"; - reg = <0 0x088e8000 0 0x3000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "aux", - "ref", - "com_aux", - "usb3_pipe"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; - reset-names = "phy", - "common"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; - power-domains = <&gcc USB3_PHY_GDSC>; + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; - #clock-cells = <1>; - #phy-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; - status = "disabled"; - }; + status = "disabled"; + }; - usb_1: usb@a6f8800 { - compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 15 IRQ_TYPE_EDGE_RISING>, - <&pdc 14 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", - "dm_hs_phy_irq", - "dp_hs_phy_irq"; + interrupts = ; - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&tcsr TCSR_USB3_CLKREF_EN>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - resets = <&gcc GCC_USB30_PRIM_BCR>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; - power-domains = <&gcc USB30_PRIM_GDSC>; - required-opps = <&rpmhpd_opp_nom>; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <0>; - status = "disabled"; + status = "disabled"; + }; - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; - interrupts = ; + interrupts = ; - iommus = <&apps_smmu 0x40 0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; - phys = <&usb_1_hsphy>, - <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", - "usb3-phy"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,usb2-gadget-lpm-disable; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,is-utmi-l1-suspend; - snps,usb3_lpm_capable; - snps,usb2-lpm-disable; - snps,has-lpm-erratum; - tx-fifo-resize; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; - dma-coherent; + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; - ports { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; + status = "disabled"; + }; - usb_1_dwc3_hs: endpoint { + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + uart15: serial@89c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart15_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0 0x009c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + clock-names = "s-ahb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00980000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00984000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00988000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0098c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00990000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0xc>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0>; + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; + + iommus = <&apps_smmu 0xa3 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,sm8650-cnoc-main"; + reg = <0 0x01500000 0 0x14080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,sm8650-config-noc"; + reg = <0 0x01600000 0 0x6200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8650-system-noc"; + reg = <0 0x01680000 0 0x1d080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8650-pcie-anoc"; + reg = <0 0x016c0000 0 0x12200>; + + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8650-aggre1-noc"; + reg = <0 0x016e0000 0 0x16400>; + + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8650-aggre2-noc"; + reg = <0 0x01700000 0 0x1e400>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,sm8650-mmss-noc"; + reg = <0 0x01780000 0 0x5b800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + rng: rng@10c3000 { + compatible = "qcom,sm8650-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + + interrupts = ; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_0_GDSC>; + + iommu-map = <0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <0>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>, + <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>; + + dma-coherent; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + + interrupts = ; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_1_GDSC>; + + iommu-map = <0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <1>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + dma-coherent; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>, + <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + + interrupts = ; + + #dma-cells = <1>; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8650-qmp-ufs-phy"; + reg = <0 0x01d80000 0 0x2000>; + + clocks = <&tcsr TCSR_UFS_CLKREF_EN>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + + interrupts = ; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <100000000 403000000>, + <0 0>, + <0 0>, + <100000000 403000000>, + <100000000 403000000>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0>; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sm8650-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8650-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0xa0000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8650-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8650-mpss-pas"; + reg = <0 0x04080000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MSS>; + power-domain-names = "cx", + "mss"; + + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <1>; + + label = "mpss"; + }; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,sm8650-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,sm8650-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3a200>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,sm8650-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + iommus = <&apps_smmu 0x540 0>; + + bus-width = <4>; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = ; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", + "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae95000 0 0x200>, + <0 0x0ae95200 0 0x280>, + <0 0x0ae95500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae97000 0 0x200>, + <0 0x0ae97200 0 0x280>, + <0 0x0ae97500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8650-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, /* dp0 */ + <0>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8650-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e3000 0 0x154>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x40 0>; + + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { }; }; @@ -969,115 +3032,602 @@ pdc: interrupt-controller@b220000 { <125 63 1>, <126 716 12>, <138 251 5>, <143 244 4>; - #interrupt-cells = <2>; - interrupt-controller; - }; + #interrupt-cells = <2>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c228000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c229000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c22a000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 211>; + + wakeup-parent = <&pdc>; + + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio66", "gpio67"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio70", "gpio71"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c5_data_clk: hub-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio74", "gpio75"; + function = "i2chub0_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c6_data_clk: hub-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "i2chub0_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c7_data_clk: hub-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio78", "gpio79"; + function = "i2chub0_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c8_data_clk: hub-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio206", "gpio207"; + function = "i2chub0_se8"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c9_data_clk: hub-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "i2chub0_se9"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio60", "gpio61"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; - tsens0: thermal-sensor@c228000 { - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; - reg = <0 0x0c228000 0 0x1000>, /* TM */ - <0 0x0c222000 0 0x1000>; /* SROT */ + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; - interrupts = , - ; - interrupt-names = "uplow", - "critical"; + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; - #qcom,sensors = <15>; + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; - #thermal-sensor-cells = <1>; - }; + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; - tsens1: thermal-sensor@c229000 { - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; - reg = <0 0x0c229000 0 0x1000>, /* TM */ - <0 0x0c223000 0 0x1000>; /* SROT */ + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; - interrupts = , - ; - interrupt-names = "uplow", - "critical"; + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; - #qcom,sensors = <16>; + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; - #thermal-sensor-cells = <1>; - }; + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; - tsens2: thermal-sensor@c22a000 { - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; - reg = <0 0x0c22a000 0 0x1000>, /* TM */ - <0 0x0c224000 0 0x1000>; /* SROT */ + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; - interrupts = , - ; - interrupt-names = "uplow", - "critical"; + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; - #qcom,sensors = <13>; + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio63"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; - #thermal-sensor-cells = <1>; - }; + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio60", "gpio61", "gpio62"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; - aoss_qmp: power-management@c300000 { - compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x400>; + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio3"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; - interrupt-parent = <&ipcc>; - interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; - mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio7"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; - #clock-cells = <0>; - }; + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; - sram@c3f0000 { - compatible = "qcom,rpmh-stats"; - reg = <0 0x0c3f0000 0 0x400>; - }; + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio11"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; - spmi_bus: spmi@c400000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0 0x0c400000 0 0x3000>, - <0 0x0c500000 0 0x4000000>, - <0 0x0c440000 0 0x80000>, - <0 0x0c4c0000 0 0x20000>, - <0 0x0c42d000 0 0x4000>; - reg-names = "core", - "chnls", - "obsrvr", - "intr", - "cnfg"; + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "periph_irq"; + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio15"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; - qcom,ee = <0>; - qcom,channel = <0>; - qcom,bus-id = <0>; + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; - interrupt-controller; - #interrupt-cells = <4>; + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio19"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; - #address-cells = <2>; - #size-cells = <0>; - }; + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; - tlmm: pinctrl@f100000 { - compatible = "qcom,sm8650-tlmm"; - reg = <0 0x0f100000 0 0x300000>; + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio23"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; - interrupts = ; + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; - gpio-controller; - #gpio-cells = <2>; + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio27"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; - interrupt-controller; - #interrupt-cells = <2>; + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; - gpio-ranges = <&tlmm 0 0 211>; + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; - wakeup-parent = <&pdc>; + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; qup_uart15_default: qup-uart15-default-state { /* TX, RX */ @@ -1086,6 +3636,46 @@ qup_uart15_default: qup-uart15-default-state { drive-strength = <2>; bias-disable; }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; }; apps_smmu: iommu@15000000 { @@ -1437,6 +4027,105 @@ cpufreq_hw: cpufreq@17d91000 { #clock-cells = <1>; }; + pmu@24091000 { + compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2086000>; + }; + + opp-1 { + opp-peak-kBps = <2929000>; + }; + + opp-2 { + opp-peak-kBps = <5931000>; + }; + + opp-3 { + opp-peak-kBps = <6515000>; + }; + + opp-4 { + opp-peak-kBps = <7980000>; + }; + + opp-5 { + opp-peak-kBps = <10437000>; + }; + + opp-6 { + opp-peak-kBps = <12157000>; + }; + + opp-7 { + opp-peak-kBps = <14060000>; + }; + + opp-8 { + opp-peak-kBps = <16113000>; + }; + }; + }; + + pmu@240b7400 { + compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b7400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4577000>; + }; + + opp-1 { + opp-peak-kBps = <7110000>; + }; + + opp-2 { + opp-peak-kBps = <9155000>; + }; + + opp-3 { + opp-peak-kBps = <12298000>; + }; + + opp-4 { + opp-peak-kBps = <14236000>; + }; + + opp-5 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,sm8650-gem-noc"; + reg = <0 0x24100000 0 0xc5080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + system-cache-controller@25000000 { compatible = "qcom,sm8650-llcc"; reg = <0 0x25000000 0 0x200000>, @@ -1452,6 +4141,135 @@ system-cache-controller@25000000 { interrupts = ; }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8650-adsp-pas"; + reg = <0 0x30000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "adsp"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8650-nsp-noc"; + reg = <0 0x320c0000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8650-cdsp-pas"; + reg = <0 0x32300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <5>; + + label = "cdsp"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "cdsp"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; thermal-zones { -- 2.34.1