Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Stefan Hansson <newbyte@postmarketos.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Stefan Hansson <newbyte@postmarketos.org>
Subject: [PATCH v3 4/4] ARM: dts: qcom: samsung-matisse-common: Add UART
Date:   Wed, 25 Oct 2023 10:37:52 +0200
Message-ID: <20231025083952.12367-5-newbyte@postmarketos.org>
In-Reply-To: <20231025083952.12367-1-newbyte@postmarketos.org>
References: <20231025083952.12367-1-newbyte@postmarketos.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This was not enabled in the matisse-wifi tree. Without this, it is not
possible to use the USB port for serial debugging via a "Carkit debug
cable".

Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
---
 .../boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi    | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
index 11fec4e963b7..35290ce63b40 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -233,6 +233,10 @@ muic: usb-switch@25 {
 	};
 };
 
+&blsp1_uart3 {
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
-- 
2.41.0