Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34;
Message-ID: <68e9c5f5-8ca9-40c3-979c-651e89c9061f@linaro.org>
Date:   Wed, 25 Oct 2023 10:52:26 +0200
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v3 1/4] ARM: dts: qcom: samsung-matisse-common: Add
 initial common device tree
Content-Language: en-US
To:     Stefan Hansson <newbyte@postmarketos.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org
References: <20231025083952.12367-1-newbyte@postmarketos.org>
 <20231025083952.12367-2-newbyte@postmarketos.org>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Autocrypt: addr=krzysztof.kozlowski@linaro.org; keydata=
 xsFNBFVDQq4BEAC6KeLOfFsAvFMBsrCrJ2bCalhPv5+KQF2PS2+iwZI8BpRZoV+Bd5kWvN79
 cFgcqTTuNHjAvxtUG8pQgGTHAObYs6xeYJtjUH0ZX6ndJ33FJYf5V3yXqqjcZ30FgHzJCFUu
 JMp7PSyMPzpUXfU12yfcRYVEMQrmplNZssmYhiTeVicuOOypWugZKVLGNm0IweVCaZ/DJDIH
 gNbpvVwjcKYrx85m9cBVEBUGaQP6AT7qlVCkrf50v8bofSIyVa2xmubbAwwFA1oxoOusjPIE
 J3iadrwpFvsZjF5uHAKS+7wHLoW9hVzOnLbX6ajk5Hf8Pb1m+VH/E8bPBNNYKkfTtypTDUCj
 NYcd27tjnXfG+SDs/EXNUAIRefCyvaRG7oRYF3Ec+2RgQDRnmmjCjoQNbFrJvJkFHlPeHaeS
 BosGY+XWKydnmsfY7SSnjAzLUGAFhLd/XDVpb1Een2XucPpKvt9ORF+48gy12FA5GduRLhQU
 vK4tU7ojoem/G23PcowM1CwPurC8sAVsQb9KmwTGh7rVz3ks3w/zfGBy3+WmLg++C2Wct6nM
 Pd8/6CBVjEWqD06/RjI2AnjIq5fSEH/BIfXXfC68nMp9BZoy3So4ZsbOlBmtAPvMYX6U8VwD
 TNeBxJu5Ex0Izf1NV9CzC3nNaFUYOY8KfN01X5SExAoVTr09ewARAQABzTRLcnp5c3p0b2Yg
 S296bG93c2tpIDxrcnp5c3p0b2Yua296bG93c2tpQGxpbmFyby5vcmc+wsGUBBMBCgA+FiEE
 m9B+DgxR+NWWd7dUG5NDfTtBYpsFAmI+BxMCGwMFCRRfreEFCwkIBwIGFQoJCAsCBBYCAwEC
 HgECF4AACgkQG5NDfTtBYptgbhAAjAGunRoOTduBeC7V6GGOQMYIT5n3OuDSzG1oZyM4kyvO
 XeodvvYv49/ng473E8ZFhXfrre+c1olbr1A8pnz9vKVQs9JGVa6wwr/6ddH7/yvcaCQnHRPK
 mnXyP2BViBlyDWQ71UC3N12YCoHE2cVmfrn4JeyK/gHCvcW3hUW4i5rMd5M5WZAeiJj3rvYh
 v8WMKDJOtZFXxwaYGbvFJNDdvdTHc2x2fGaWwmXMJn2xs1ZyFAeHQvrp49mS6PBQZzcx0XL5
 cU9ZjhzOZDn6Apv45/C/lUJvPc3lo/pr5cmlOvPq1AsP6/xRXsEFX/SdvdxJ8w9KtGaxdJuf
 rpzLQ8Ht+H0lY2On1duYhmro8WglOypHy+TusYrDEry2qDNlc/bApQKtd9uqyDZ+rx8bGxyY
 qBP6bvsQx5YACI4p8R0J43tSqWwJTP/R5oPRQW2O1Ye1DEcdeyzZfifrQz58aoZrVQq+innR
 aDwu8qDB5UgmMQ7cjDSeAQABdghq7pqrA4P8lkA7qTG+aw8Z21OoAyZdUNm8NWJoQy8m4nUP
 gmeeQPRc0vjp5JkYPgTqwf08cluqO6vQuYL2YmwVBIbO7cE7LNGkPDA3RYMu+zPY9UUi/ln5
 dcKuEStFZ5eqVyqVoZ9eu3RTCGIXAHe1NcfcMT9HT0DPp3+ieTxFx6RjY3kYTGLOwU0EVUNc
 NAEQAM2StBhJERQvgPcbCzjokShn0cRA4q2SvCOvOXD+0KapXMRFE+/PZeDyfv4dEKuCqeh0
 hihSHlaxTzg3TcqUu54w2xYskG8Fq5tg3gm4kh1Gvh1LijIXX99ABA8eHxOGmLPRIBkXHqJY
 oHtCvPc6sYKNM9xbp6I4yF56xVLmHGJ61KaWKf5KKWYgA9kfHufbja7qR0c6H79LIsiYqf92
 H1HNq1WlQpu/fh4/XAAaV1axHFt/dY/2kU05tLMj8GjeQDz1fHas7augL4argt4e+jum3Nwt
 yupodQBxncKAUbzwKcDrPqUFmfRbJ7ARw8491xQHZDsP82JRj4cOJX32sBg8nO2N5OsFJOcd
 5IE9v6qfllkZDAh1Rb1h6DFYq9dcdPAHl4zOj9EHq99/CpyccOh7SrtWDNFFknCmLpowhct9
 5ZnlavBrDbOV0W47gO33WkXMFI4il4y1+Bv89979rVYn8aBohEgET41SpyQz7fMkcaZU+ok/
 +HYjC/qfDxT7tjKXqBQEscVODaFicsUkjheOD4BfWEcVUqa+XdUEciwG/SgNyxBZepj41oVq
 FPSVE+Ni2tNrW/e16b8mgXNngHSnbsr6pAIXZH3qFW+4TKPMGZ2rZ6zITrMip+12jgw4mGjy
 5y06JZvA02rZT2k9aa7i9dUUFggaanI09jNGbRA/ABEBAAHCwXwEGAEKACYCGwwWIQSb0H4O
 DFH41ZZ3t1Qbk0N9O0FimwUCYDzvagUJFF+UtgAKCRAbk0N9O0Fim9JzD/0auoGtUu4mgnna
 oEEpQEOjgT7l9TVuO3Qa/SeH+E0m55y5Fjpp6ZToc481za3xAcxK/BtIX5Wn1mQ6+szfrJQ6
 59y2io437BeuWIRjQniSxHz1kgtFECiV30yHRgOoQlzUea7FgsnuWdstgfWi6LxstswEzxLZ
 Sj1EqpXYZE4uLjh6dW292sO+j4LEqPYr53hyV4I2LPmptPE9Rb9yCTAbSUlzgjiyyjuXhcwM
 qf3lzsm02y7Ooq+ERVKiJzlvLd9tSe4jRx6Z6LMXhB21fa5DGs/tHAcUF35hSJrvMJzPT/+u
 /oVmYDFZkbLlqs2XpWaVCo2jv8+iHxZZ9FL7F6AHFzqEFdqGnJQqmEApiRqH6b4jRBOgJ+cY
 qc+rJggwMQcJL9F+oDm3wX47nr6jIsEB5ZftdybIzpMZ5V9v45lUwmdnMrSzZVgC4jRGXzsU
 EViBQt2CopXtHtYfPAO5nAkIvKSNp3jmGxZw4aTc5xoAZBLo0OV+Ezo71pg3AYvq0a3/oGRG
 KQ06ztUMRrj8eVtpImjsWCd0bDWRaaR4vqhCHvAG9iWXZu4qh3ipie2Y0oSJygcZT7H3UZxq
 fyYKiqEmRuqsvv6dcbblD8ZLkz1EVZL6djImH5zc5x8qpVxlA0A0i23v5QvN00m6G9NFF0Le
 D2GYIS41Kv4Isx2dEFh+/Q==
In-Reply-To: <20231025083952.12367-2-newbyte@postmarketos.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 25/10/2023 10:37, Stefan Hansson wrote:
> According to the dts from the kernel source code released by Samsung,
> matissewifi and matisselte only have minor differences in hardware, so
> use a shared dtsi to reduce duplicated code. Additionally, this should
> make adding support for matisse3g easier should someone want to do that
> at a later point.
> 
> As such, add a common device tree for all matisse devices by Samsung
> based on the matissewifi dts. Support for matisselte will be introduced
> in a later patch in this series and will use the common dtsi as well.
> 
> Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
> ---

...

> diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> similarity index 90%
> copy from arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
> copy to arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> index f516e0426bb9..11fec4e963b7 100644
> --- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> @@ -1,10 +1,9 @@
>  // SPDX-License-Identifier: BSD-3-Clause
>  /*
>   * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
> + * Copyright (c) 2023, Stefan Hansson <newbyte@postmarketos.org>

Removing lines is not a much of a copyrightable change.

>   */
>  
> -/dts-v1/;
> -
>  #include <dt-bindings/input/input.h>
>  #include "qcom-msm8226.dtsi"
>  #include "qcom-pm8226.dtsi"
> @@ -13,10 +12,6 @@
>  /delete-node/ &smem_region;
>  
>  / {
> -	model = "Samsung Galaxy Tab 4 10.1";
> -	compatible = "samsung,matisse-wifi", "qcom,apq8026";
> -	chassis-type = "tablet";
> -
>  	aliases {
>  		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
>  		mmc1 = &sdhc_2; /* SDC2 SD card slot */
> @@ -137,8 +132,8 @@ reg_tsp_1p8v: regulator-tsp-1p8v {
>  		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  
> -		pinctrl-names = "default";
>  		pinctrl-0 = <&tsp_en_default_state>;
> +		pinctrl-names = "default";

That's an unexpected change.


>  	};
>  
>  	reg_tsp_3p3v: regulator-tsp-3p3v {
> @@ -147,11 +142,11 @@ reg_tsp_3p3v: regulator-tsp-3p3v {
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  
> -		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
> +		/* GPIO is board-specific */
>  		enable-active-high;

Then regulator as well. Move it to board.

>  
> -		pinctrl-names = "default";
>  		pinctrl-0 = <&tsp_en1_default_state>;
> +		pinctrl-names = "default";
>  	};
>  
>  	reserved-memory {
> @@ -223,26 +218,6 @@ &adsp {
>  	status = "okay";
>  };
>  
> -&blsp1_i2c2 {
> -	status = "okay";
> -
> -	accelerometer@1d {
> -		compatible = "st,lis2hh12";
> -		reg = <0x1d>;
> -
> -		interrupt-parent = <&tlmm>;
> -		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
> -
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&accel_int_default_state>;
> -
> -		st,drdy-int-pin = <1>;
> -
> -		vdd-supply = <&pm8226_l19>;
> -		vddio-supply = <&pm8226_lvs1>;
> -	};
> -};
> -
>  &blsp1_i2c4 {
>  	status = "okay";
>  
> @@ -253,28 +228,8 @@ muic: usb-switch@25 {
>  		interrupt-parent = <&tlmm>;
>  		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
>  
> -		pinctrl-names = "default";
>  		pinctrl-0 = <&muic_int_default_state>;
> -	};
> -};
> -
> -&blsp1_i2c5 {
> -	status = "okay";
> -
> -	touchscreen@4a {
> -		compatible = "atmel,maxtouch";
> -		reg = <0x4a>;
> -
> -		interrupt-parent = <&tlmm>;
> -		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> -
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&tsp_int_rst_default_state>;
> -
> -		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
> -
> -		vdd-supply = <&reg_tsp_1p8v>;
> -		vdda-supply = <&reg_tsp_3p3v>;
>  	};
>  };
>  
> @@ -287,9 +242,9 @@ pm8226_s3: s3 {
>  			regulator-max-microvolt = <1300000>;
>  		};
>  
> +		/* Upper voltage constraint is board-specific */
>  		pm8226_s4: s4 {
>  			regulator-min-microvolt = <1800000>;
> -			regulator-max-microvolt = <1800000>;

Then keep here widest constraints. IOW, this should be changed not in
this patch, but your next one.


>  		};
>  
>  		pm8226_s5: s5 {
> @@ -307,9 +262,9 @@ pm8226_l2: l2 {
>  			regulator-max-microvolt = <1200000>;
>  		};
>  
> +		/* Upper voltage constraint is board-specific */
>  		pm8226_l3: l3 {
>  			regulator-min-microvolt = <750000>;
> -			regulator-max-microvolt = <1337500>;

Ditto

>  			regulator-always-on;
>  		};
>  
> @@ -493,7 +448,7 @@ tsp_en_default_state: tsp-en-default-state {
>  	};
>  
>  	tsp_en1_default_state: tsp-en1-default-state {
> -		pins = "gpio73";
> +		/* pins is board-specific */

Then node is board specific as well.


Best regards,
Krzysztof