Received: by 2002:a05:7412:a9a2:b0:e2:908c:2ebd with SMTP id o34csp1164416rdh; Fri, 27 Oct 2023 06:36:59 -0700 (PDT) X-Google-Smtp-Source: AGHT+IFLJhHh9dcCdL4IuWG82iCJENiviRjWfYOS13F73lGNerIknyvj1ae1jPJHYHFYpUXIgEjT X-Received: by 2002:a25:344b:0:b0:da0:4b92:6a05 with SMTP id b72-20020a25344b000000b00da04b926a05mr2786484yba.29.1698413819177; Fri, 27 Oct 2023 06:36:59 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1698413819; cv=none; d=google.com; s=arc-20160816; b=OEUchMkHtW4N0a5KIEQ3J6mEz+9pPDzwmrYt4PyzRgN8SG4d/zPdwWirsMelkF3tMw 4xmetck8IXXYLXpLnyeEDVyGMMUsTDUXfBzt4x9DwED+2AUbqHBqp/3bhOiB2jWN2hEu T7Ei4GxPwSHHrkWsoZU7NBnWfRiaRJOBKIne9zggMWVDawXQJsUJq/QqVpgOCaY0v7Xe ZZzEozNcEWslr2sYPvgGoFVg2iNHMjVtw3nrJKjvHu/RZx8v6okdkNQ0CpO78SxQFTVC 7MtJDRj10MEfMCJwnxn3BWnBqKYxrWzTnrAtM72y0A6ZfW37/SnrfV7lInASrzJGxtYs /SCg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:feedback-id:content-transfer-encoding :mime-version:references:in-reply-to:message-id:date:subject:cc:to :from:dkim-signature; bh=TMUuKmCwAN/dQq9rxwIHqvrEpoAvyHud+zwVSEPvl/Q=; fh=TXmJ51wQtzLLjes0qtH+NOoYV89/uc4AwJxMSeVWyD4=; b=Xr0eqyWGkoGerMKbcuNO9Hn1zZUPTdzh88ZH/jGOrbIOmioAaRXDcZpX3+GBvph47g 0aepV5TOelec2Gou1w0PWjHoGF0yiVs/0h/c5+Gfb2mHWAv18FvMhkzJQqOkin5wNSGo sg03ZIuzYgjd5eW/c0MpPsa9vfSIOxLcFR8+VH7HUES8adZWm/h67ddc5DzAolYbWFMK m+CczXAgwmIHU1Q7lf5yryPkQ3s51YDK20/kyYYoelvpgD3Y8HNKmLsenLZgF6DWxAOW hxOUqyu6TpxkTwjqczWeJhN0R2sjZ1VIkOUrBYzwBwHMTVIWbtsWaa/99DmP3tcASJWS aapg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@siemens.com header.s=fm1 header.b=bXjKmsYF; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=siemens.com Return-Path: Received: from fry.vger.email (fry.vger.email. [23.128.96.38]) by mx.google.com with ESMTPS id r15-20020a5b018f000000b00d801af7c4a8si2523222ybl.385.2023.10.27.06.36.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 27 Oct 2023 06:36:59 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38; Authentication-Results: mx.google.com; dkim=pass header.i=@siemens.com header.s=fm1 header.b=bXjKmsYF; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=siemens.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by fry.vger.email (Postfix) with ESMTP id 7A6A183845FE; Fri, 27 Oct 2023 06:36:47 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at fry.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345992AbjJ0Ng0 (ORCPT + 99 others); Fri, 27 Oct 2023 09:36:26 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58624 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235012AbjJ0NgC (ORCPT ); Fri, 27 Oct 2023 09:36:02 -0400 X-Greylist: delayed 62 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Fri, 27 Oct 2023 06:35:45 PDT Received: from mta-64-225.siemens.flowmailer.net (mta-64-225.siemens.flowmailer.net [185.136.64.225]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 06E631732 for ; Fri, 27 Oct 2023 06:35:44 -0700 (PDT) Received: by mta-64-225.siemens.flowmailer.net with ESMTPSA id 202310271334402cded1989dcfe7233f for ; Fri, 27 Oct 2023 15:34:40 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; s=fm1; d=siemens.com; i=jan.kiszka@siemens.com; h=Date:From:Subject:To:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:Cc:References:In-Reply-To; bh=TMUuKmCwAN/dQq9rxwIHqvrEpoAvyHud+zwVSEPvl/Q=; b=bXjKmsYFnMA6kD0zsdOpqo5nOwhqPzSsOlnDAB5ExpUolGAc/zr6nxJ9ntl71Dp9o1n4DO Bro9ozakRHG0SRQ68YG17THpEQNLxBT7vK1OFFG0w76gAnoMwrkYcrc16rPVzjVR50Tr81pn lzGiZfUfrmFqcgL+i4Y1OQiRggz1s=; From: Jan Kiszka To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Bao Cheng Su , Benedikt Niedermayr Subject: [PATCH 3/7] arm64: dts: ti: iot2050: Definitions for runtime pinmuxing Date: Fri, 27 Oct 2023 15:34:34 +0200 Message-Id: <4ecdf2fbe8c8a99e95743c78c63205548bb97a04.1698413678.git.jan.kiszka@siemens.com> In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Flowmailer-Platform: Siemens Feedback-ID: 519:519-294854:519-21489:flowmailer X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIMWL_WL_MED,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on fry.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (fry.vger.email [0.0.0.0]); Fri, 27 Oct 2023 06:36:48 -0700 (PDT) From: Benedikt Niedermayr Add multiple device tree nodes in order to support runtime pinmuxing via debugfs. All nodes are added to the pinctrl device node, since they are now belonging to multiple interfaces now. Note: Pinconf is also handled by debugfs-pinmux. This is possible since pinconf and pinmux accessing the same 32-Bit register and setting the function mask to 32-Bit allows writes to the whole register. Signed-off-by: Benedikt Niedermayr --- .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 663 +++++++++++++++++- .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 +- 2 files changed, 628 insertions(+), 39 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index fc39ae0f9587..74c4accff4b7 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -114,6 +114,425 @@ dp_refclk: clock { }; &wkup_pmx0 { + pinctrl-names = + "default", + "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown", + "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown", + "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown", + "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown", + "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown", + "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown", + "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown", + "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown", + "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown", + "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown", + "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown", + "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown", + "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown", + "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown"; + + pinctrl-0 = <&d0_uart0_rxd>; + pinctrl-1 = <&d0_uart0_rxd>; + pinctrl-2 = <&d0_gpio>; + pinctrl-3 = <&d0_gpio_pullup>; + pinctrl-4 = <&d0_gpio_pulldown>; + pinctrl-5 = <&d1_uart0_txd>; + pinctrl-6 = <&d1_gpio>; + pinctrl-7 = <&d1_gpio_pullup>; + pinctrl-8 = <&d1_gpio_pulldown>; + pinctrl-9 = <&d2_uart0_ctsn>; + pinctrl-10 = <&d2_gpio>; + pinctrl-11 = <&d2_gpio_pullup>; + pinctrl-12 = <&d2_gpio_pulldown>; + pinctrl-13 = <&d3_uart0_rtsn>; + pinctrl-14 = <&d3_gpio>; + pinctrl-15 = <&d3_gpio_pullup>; + pinctrl-16 = <&d3_gpio_pulldown>; + pinctrl-17 = <&d10_spi0_cs0>; + pinctrl-18 = <&d10_gpio>; + pinctrl-19 = <&d10_gpio_pullup>; + pinctrl-20 = <&d10_gpio_pulldown>; + pinctrl-21 = <&d11_spi0_d0>; + pinctrl-22 = <&d11_gpio>; + pinctrl-23 = <&d11_gpio_pullup>; + pinctrl-24 = <&d11_gpio_pulldown>; + pinctrl-25 = <&d12_spi0_d1>; + pinctrl-26 = <&d12_gpio>; + pinctrl-27 = <&d12_gpio_pullup>; + pinctrl-28 = <&d12_gpio_pulldown>; + pinctrl-29 = <&d13_spi0_clk>; + pinctrl-30 = <&d13_gpio>; + pinctrl-31 = <&d13_gpio_pullup>; + pinctrl-32 = <&d13_gpio_pulldown>; + pinctrl-33 = <&a0_gpio>; + pinctrl-34 = <&a0_gpio_pullup>; + pinctrl-35 = <&a0_gpio_pulldown>; + pinctrl-36 = <&a1_gpio>; + pinctrl-37 = <&a1_gpio_pullup>; + pinctrl-38 = <&a1_gpio_pulldown>; + pinctrl-39 = <&a2_gpio>; + pinctrl-40 = <&a2_gpio_pullup>; + pinctrl-41 = <&a2_gpio_pulldown>; + pinctrl-42 = <&a3_gpio>; + pinctrl-43 = <&a3_gpio_pullup>; + pinctrl-44 = <&a3_gpio_pulldown>; + pinctrl-45 = <&a4_gpio>; + pinctrl-46 = <&a4_gpio_pullup>; + pinctrl-47 = <&a4_gpio_pulldown>; + pinctrl-48 = <&a5_gpio>; + pinctrl-49 = <&a5_gpio_pullup>; + pinctrl-50 = <&a5_gpio_pulldown>; + + d0_uart0_rxd: d0-uart0-rxd { + pinctrl-single,pins = < + /* (P4) MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) + >; + }; + + d0_gpio: d0-gpio { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) + >; + }; + + d0_gpio_pullup: d0-gpio-pullup { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7) + >; + }; + + d0_gpio_pulldown: d0-gpio-pulldown { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d1_uart0_txd: d1-uart0-txd { + pinctrl-single,pins = < + /* (P5) MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) + >; + }; + + d1_gpio: d1-gpio { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pullup: d1-gpio-pullup { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pulldown: d1-gpio-pulldown { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d2_uart0_ctsn: d2-uart0-ctsn { + pinctrl-single,pins = < + /* (P1) MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) + >; + }; + + d2_gpio: d2-gpio { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pullup: d2-gpio-pullup { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pulldown: d2-gpio-pulldown { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d3_uart0_rtsn: d3-uart0-rtsn { + pinctrl-single,pins = < + /* (N3) MCU_UART0_RTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) + >; + }; + + d3_gpio: d3-gpio { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pullup: d3-gpio-pullup { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pulldown: d3-gpio-pulldown { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d10_spi0_cs0: d10-spi0-cs0 { + pinctrl-single,pins = < + /* (Y4) MCU_SPI0_CS0 */ + AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) + >; + }; + + d10_gpio: d10-gpio { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pullup: d10-gpio-pullup { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pulldown: d10-gpio-pulldown { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d11_spi0_d0: d11-spi0-d0 { + pinctrl-single,pins = < + /* (Y3) MCU_SPI0_D0 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) + >; + }; + + d11_gpio: d11-gpio { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pullup: d11-gpio-pullup { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pulldown: d11-gpio-pulldown { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d12_spi0_d1: d12-spi0-d1 { + pinctrl-single,pins = < + /* (Y2) MCU_SPI0_D1 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) + >; + }; + + d12_gpio: d12-gpio { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pullup: d12-gpio-pullup { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pulldown: d12-gpio-pulldown { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d13_spi0_clk: d13-spi0-clk { + pinctrl-single,pins = < + /* (Y1) MCU_SPI0_CLK */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) + >; + }; + + d13_gpio: d13-gpio { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pullup: d13-gpio-pullup { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pulldown: d13-gpio-pulldown { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a0_gpio: a0-gpio { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pullup: a0-gpio-pullup { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pulldown: a0-gpio-pulldown { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a1_gpio: a1-gpio { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pullup: a1-gpio-pullup { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pulldown: a1-gpio-pulldown { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a2_gpio: a2-gpio { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pullup: a2-gpio-pullup { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pulldown: a2-gpio-pulldown { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a3_gpio: a3-gpio { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pullup: a3-gpio-pullup { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pulldown: a3-gpio-pulldown { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a4_gpio: a4-gpio { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pullup: a4-gpio-pullup { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pulldown: a4-gpio-pulldown { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a5_gpio: a5-gpio { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7) + >; + }; + + a5_gpio_pullup: a5-gpio-pullup { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7) + >; + }; + + a5_gpio_pulldown: a5-gpio-pulldown { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7) + >; + }; + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < /* (AC7) WKUP_I2C0_SCL */ @@ -146,23 +565,6 @@ AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) >; }; - arduino_uart_pins_default: arduino-uart-default-pins { - pinctrl-single,pins = < - /* (P4) MCU_UART0_RXD */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) - /* (P5) MCU_UART0_TXD */ - AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) - >; - }; - - arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { - pinctrl-single,pins = < - /* (P1) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7) - >; - }; arduino_io_oe_pins_default: arduino-io-oe-default-pins { pinctrl-single,pins = < @@ -242,6 +644,214 @@ AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7) }; &main_pmx0 { + pinctrl-names = + "default", + "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown", + "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown", + "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown", + "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown", + "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown", + "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown"; + + pinctrl-0 = <&d4_ehrpwm0_a>; + pinctrl-1 = <&d4_ehrpwm0_a>; + pinctrl-2 = <&d4_gpio>; + pinctrl-3 = <&d4_gpio_pullup>; + pinctrl-4 = <&d4_gpio_pulldown>; + + pinctrl-5 = <&d5_ehrpwm1_a>; + pinctrl-6 = <&d5_gpio>; + pinctrl-7 = <&d5_gpio_pullup>; + pinctrl-8 = <&d5_gpio_pulldown>; + + pinctrl-9 = <&d6_ehrpwm2_a>; + pinctrl-10 = <&d6_gpio>; + pinctrl-11 = <&d6_gpio_pullup>; + pinctrl-12 = <&d6_gpio_pulldown>; + + pinctrl-13 = <&d7_ehrpwm3_a>; + pinctrl-14 = <&d7_gpio>; + pinctrl-15 = <&d7_gpio_pullup>; + pinctrl-16 = <&d7_gpio_pulldown>; + + pinctrl-17 = <&d8_ehrpwm4_a>; + pinctrl-18 = <&d8_gpio>; + pinctrl-19 = <&d8_gpio_pullup>; + pinctrl-20 = <&d8_gpio_pulldown>; + + pinctrl-21 = <&d9_ehrpwm5_a>; + pinctrl-22 = <&d9_gpio>; + pinctrl-23 = <&d9_gpio_pullup>; + pinctrl-24 = <&d9_gpio_pulldown>; + + d4_ehrpwm0_a: d4-ehrpwm0-a { + pinctrl-single,pins = < + /* (AG18) EHRPWM0_A */ + AM65X_IOPAD(0x0084, PIN_OUTPUT, 5) + >; + }; + + d4_gpio: d4-gpio { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + d4_gpio_pullup: d4-gpio-pullup { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) + >; + }; + + d4_gpio_pulldown: d4-gpio-pulldown { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d5_ehrpwm1_a: d5-ehrpwm1-a { + pinctrl-single,pins = < + /* (AF17) EHRPWM1_A */ + AM65X_IOPAD(0x008C, PIN_OUTPUT, 5) + >; + }; + + d5_gpio: d5-gpio { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT, 7) + >; + }; + + d5_gpio_pullup: d5-gpio-pullup { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7) + >; + }; + + d5_gpio_pulldown: d5-gpio-pulldown { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d6_ehrpwm2_a: d6-ehrpwm2-a { + pinctrl-single,pins = < + /* (AH16) EHRPWM2_A */ + AM65X_IOPAD(0x0098, PIN_OUTPUT, 5) + >; + }; + + d6_gpio: d6-gpio { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d6_gpio_pullup: d6-gpio-pullup { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7) + >; + }; + + d6_gpio_pulldown: d6-gpio-pulldown { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d7_ehrpwm3_a: d7-ehrpwm3-a { + pinctrl-single,pins = < + /* (AH15) EHRPWM3_A */ + AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5) + >; + }; + + d7_gpio: d7-gpio { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT, 7) + >; + }; + + d7_gpio_pullup: d7-gpio-pullup { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7) + >; + }; + + d7_gpio_pulldown: d7-gpio-pulldown { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d8_ehrpwm4_a: d8-ehrpwm4-a { + pinctrl-single,pins = < + /* (AG15) EHRPWM4_A */ + AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5) + >; + }; + + d8_gpio: d8-gpio { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT, 7) + >; + }; + + d8_gpio_pullup: d8-gpio-pullup { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7) + >; + }; + + d8_gpio_pulldown: d8-gpio-pulldown { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d9_ehrpwm5_a: d9-ehrpwm5-a { + pinctrl-single,pins = < + /* (AD15) EHRPWM5_A */ + AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5) + >; + }; + + d9_gpio: d9-gpio { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT, 7) + >; + }; + + d9_gpio_pullup: d9-gpio-pullup { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7) + >; + }; + + d9_gpio_pulldown: d9-gpio-pulldown { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7) + >; + }; + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ @@ -283,17 +893,6 @@ AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; }; - arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */ - >; - }; - dss_vout1_pins_default: dss-vout1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ @@ -370,13 +969,9 @@ &main_uart1 { &mcu_uart0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&arduino_uart_pins_default>; }; &main_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>; gpio-line-names = "main_gpio0-base", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -389,7 +984,6 @@ &main_gpio0 { &wkup_gpio0 { pinctrl-names = "default"; pinctrl-0 = - <&arduino_io_d2_to_d3_pins_default>, <&arduino_i2c_aio_switch_pins_default>, <&arduino_io_oe_pins_default>, <&push_button_pins_default>, @@ -572,9 +1166,6 @@ &usb1 { &mcu_spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_spi0_pins_default>; - #address-cells = <1>; #size-cells = <0>; ti,pindir-d0-out-d1-in; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index 774eb14ac907..8301c35c31b3 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -66,9 +66,7 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = - <&main_m2_pcie_mux_control>, - <&arduino_io_d4_to_d9_pins_default>; + pinctrl-0 = <&main_m2_pcie_mux_control>; }; &main_gpio1 { -- 2.35.3