Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:4 as permitted sender) client-ip=2620:137:e000::3:4;
Date:   Sun, 29 Oct 2023 19:03:22 +0100
From:   Andrew Lunn <andrew@lunn.ch>
To:     Elad Nachman <enachman@marvell.com>
Cc:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, gregory.clement@bootlin.com,
        sebastian.hesselbarth@gmail.com, pali@kernel.org,
        mrkiko.rs@gmail.com, chris.packham@alliedtelesis.co.nz,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, cyuval@marvell.com
Subject: Re: [PATCH v4 3/3] arm64: dts: cn913x: add device trees for COM
 Express boards
Message-ID: <0c732f04-d1ce-4662-bc99-226784f9fb10@lunn.ch>
References: <20231029174814.559583-1-enachman@marvell.com>
 <20231029174814.559583-4-enachman@marvell.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20231029174814.559583-4-enachman@marvell.com>
Precedence: bulk

> +++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 Marvell International Ltd.
> + *
> + * Device tree for the AC5X RD Type 7 Com Express carrier board,
> + * This specific board only maintains a PCIe link with the CPU CPU module
> + * module, which does not require any special DTS definitions.
> + */
> +
> +/ {
> +	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
> +	compatible = "marvell,rd-ac5x-carrier", "marvell,cn9131", "marvell,cn9130",
> +		     "marvell,armada-ap807-quad", "marvell,armada-ap807";

This sees wrong to me. Say i mount a congatec Module in it. Its then
is not compatible with marvell,cn9131 etc. I think you should just
list the carrier compatible here.

> +#include "cn9130-db.dtsi"
> +
> +/ {
> +	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
> +	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
> +		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x2 0x00000000>;

Is the memory soldered down, or socketed?

	Andrew