Received: by 2002:a05:7412:85a1:b0:e2:908c:2ebd with SMTP id n33csp175994rdh; Mon, 30 Oct 2023 18:52:42 -0700 (PDT) X-Google-Smtp-Source: AGHT+IG3Kg1Z8TUDwMOG6hXXQU3lzZoOHTZJ5LDavWu4Og8ybk4PldsgPdzjEbewGj+PKp3CK5CQ X-Received: by 2002:a17:90a:9284:b0:280:2406:7021 with SMTP id n4-20020a17090a928400b0028024067021mr6621107pjo.35.1698717161896; Mon, 30 Oct 2023 18:52:41 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1698717161; cv=pass; d=google.com; s=arc-20160816; b=EqQmPTmdq5AHnrEDqDYO3lBIH1gyanjOJJggS/ZEVo4PwTejRt/FDb3bS/qNEblvqV JUqFkSXH5i8a5qjrkX4RrvfycGokemHhLRQg/nShYu5EnrK/rhs28jwD6Tk4UYovdTYg U1hEQiaiPVDBl3YypM3Ax3Q1S9wBbQmUnx0DZ1Hh07H7m7DcAxp+4dEHxE2WPf20DO/1 BT5qEpWpOKZ7CP/IyCnLeBNYnbVnhbS/dxFWabpYMpSCl7Or/Sik1B0DbRA0JSZJc5a1 qKUtidk7wNadU+K1IQvW2ohfC86irHll4cU9VvNsTU5wtQiPHWzDnqoISo6n/+zWbO/I f3Ug== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:references:in-reply-to:message-id :date:subject:cc:to:from; bh=uvcwSN3A610dRt27R2g7OL7L8XuDeLeXvP4HZUhF/gY=; fh=vyH9kEXYUjJAh9fsNEjW/lIzIenUROZ949RyEW+JyGA=; b=DKT+ktQSnj0WIsy1RDJql16KipsHWdOriwXxvBRQCwZG5BU8gaS/YB4uM59L8/t+S7 mpg/L+nHU/RP4xoCnQmk8BW+J1BnQ9Yq98eA8XjSzFoqDwt6I+OJSXTfadaVL1u3vTwr FcJ3W05KQGhp8YiAiWUbihgKtBEaLxaTxcDlpBUBQ3KmzHaGOslJTDgNBeVkPmL4Fo22 KweKcAIS3T/Xjppi0RwPKtPUsOQGc8AoSRJM4fUyeWc4PXnpXGPPKZjP/lbX1fW9VUDA 1HxJU9Uz1aR9d2OZ0OzdDaPcMRhSHyqKDRXybYyKO/dShd7c9JUMiNFEIBAvYKqseGgS 0SSA== ARC-Authentication-Results: i=2; mx.google.com; arc=pass (i=1 spf=pass spfdomain=yunjingtech.com dkim=pass dkdomain=yunjingtech.com dmarc=pass fromdomain=yunjingtech.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=yunjingtech.com Return-Path: Received: from groat.vger.email (groat.vger.email. [23.128.96.35]) by mx.google.com with ESMTPS id pg15-20020a17090b1e0f00b0027d61342674si218699pjb.70.2023.10.30.18.52.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 30 Oct 2023 18:52:41 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) client-ip=23.128.96.35; Authentication-Results: mx.google.com; arc=pass (i=1 spf=pass spfdomain=yunjingtech.com dkim=pass dkdomain=yunjingtech.com dmarc=pass fromdomain=yunjingtech.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=yunjingtech.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by groat.vger.email (Postfix) with ESMTP id 18C0F80A2820; Mon, 30 Oct 2023 18:52:35 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at groat.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236805AbjJaBvz (ORCPT + 99 others); Mon, 30 Oct 2023 21:51:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55346 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236796AbjJaBvx (ORCPT ); Mon, 30 Oct 2023 21:51:53 -0400 Received: from APC01-PSA-obe.outbound.protection.outlook.com (mail-psaapc01on2111.outbound.protection.outlook.com [40.107.255.111]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 45B6EE1; Mon, 30 Oct 2023 18:51:48 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=jREGxIhSg7EOAYk3gM5IKnK7h1g6JLgYg8lcB50WYmcy0g4MeGZymikQRr+s7Q4RH80s9+bLU/UL7ANNbg+/fLfD9HC/c0Mx7AGbIkvrNux/1uo0iAsr2X1E4yOnFuybsCnW4VcHBZQz4b7YpQFe7H1msUOl9aKhnW2e4563s5y8JcnjWSuybXcdn9Vsbb/6bI95iRa1G6/INHLl7huhURBdkMba9jZ6TOs2OuilsALydbIvcsxqMWL1dkhjSLDOKPJ8DL5n+UabommNAuo6caqFsdBg+rtP0E4Ab68gLqu/MV12JCHS0LDFLWUj7lkKBWWDWH0MbzX+khYVyqjoOw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=uvcwSN3A610dRt27R2g7OL7L8XuDeLeXvP4HZUhF/gY=; b=BAM2WjrNmglrvVWRx9zPg7uYYvE6BREnxayvzFKCipg3C3kTvbDf2Yv9RPj21iRuOkcGNPUNH4eX7a3Up00cqUyj2GPoY0wbsND5gCGW2sq/Q3oBIO0YeY0Ronj0ppt5O0zzaBvnaay3y3egcKtIvmiywiLOOF00bxeigL+peoiT20OHRrgZ1VWTFdr79pDkx1d2Yzvgko4hNRZisMISe9eVGTj7FUZEysHsBDN56KY2SETMaed8rWDgIzRqy0r2AhjYksl33YpnlwDgoe3ir37pSmryq9Fbmx/WwnNCYP7Yvv9WdktK2gQ2H2BMNGa80KdcAS7gnf0zgS84LQFCAg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by SEZPR06MB6926.apcprd06.prod.outlook.com (2603:1096:101:1e9::6) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6933.29; Tue, 31 Oct 2023 01:51:45 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::605a:d113:7ca9:8572]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::605a:d113:7ca9:8572%4]) with mapi id 15.20.6933.027; Tue, 31 Oct 2023 01:51:44 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V7 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA Date: Tue, 31 Oct 2023 09:51:18 +0800 Message-Id: <20231031015119.29756-3-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20231031015119.29756-1-larry.lai@yunjingtech.com> References: <20231031015119.29756-1-larry.lai@yunjingtech.com> Content-Type: text/plain X-ClientProxiedBy: TYXPR01CA0060.jpnprd01.prod.outlook.com (2603:1096:403:a::30) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|SEZPR06MB6926:EE_ X-MS-Office365-Filtering-Correlation-Id: d7c64b98-1db9-460c-07cf-08dbd9b3ef92 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:SEYPR06MB6507.apcprd06.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230031)(396003)(366004)(136003)(376002)(346002)(39830400003)(230922051799003)(230173577357003)(230273577357003)(186009)(64100799003)(1800799009)(451199024)(30864003)(2906002)(38100700002)(86362001)(8676002)(8936002)(38350700005)(5660300002)(36756003)(41300700001)(4326008)(66946007)(478600001)(6512007)(6666004)(6506007)(52116002)(6486002)(66556008)(66476007)(54906003)(316002)(2616005)(83380400001)(1076003)(26005)(579004);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?gE5L/0GNrJTt14wgaGdfkMTvNOwgJD9qG9BTORba74shyKouVqlQOKsXKDOS?= =?us-ascii?Q?aercl0Rm/auvI2HWBV9BVDk6j+rrly54fRUJOIOtYKHTG9Y1BQnxJ6GmLpiL?= =?us-ascii?Q?bIN41bQWLjKNLyu8U3IYYka5FYfNqqZE09bjrwUALBOpFTFpucASr9djQKrb?= =?us-ascii?Q?49C8NEmgw4ErVFFm2CSFoMfvz8PRW+Z90KD9tf0yeiBeYqhxPhx9+9MwObX0?= =?us-ascii?Q?vZ16Fk4DRB135iwo6qS4oZzhGla6JbUVqDehJc0rUu4s1ls0SM7ylxcJ9qqf?= =?us-ascii?Q?SnpJhjs2VLZdgw8Wlg6ob29N7U7RD4G0Pe/L1Z5C4kLAqBa4f64UOXiL98gg?= =?us-ascii?Q?JUNC/YYFjXOXDrQluKWcHbjE0nSsdx6L/EDwlAvPvY0NMShpW/PlpRdl0MUE?= =?us-ascii?Q?UngEexx+Pm0Q8JLkoroPIWQfUhieAXDGtCXukanam3lOIncYvjvX1e697wK7?= =?us-ascii?Q?IiCSk77sEeO1riiy7Jc337xTwZBtLBuB+BDC5LrIbCYqNwE7VNf5PIGArGU7?= =?us-ascii?Q?fyyNDPnuO5Oh+R9Qwc7o/2RZhsBdZOfPoDvsZCGyOHXsfLu3BZ47cUuAOa4r?= =?us-ascii?Q?ocD5FHFNWtYTQcBEPBgJEmw/Mit7xQPlX3FdVah94+PbGo9BfZr3GwWb3VhJ?= =?us-ascii?Q?1fyf0Rzws0EBJUcTvBeBGMbGI+NgKxOyvkUqyv3ynFcZm67ULQq+tyfDQbpK?= =?us-ascii?Q?6l1sxyuQeUzy1lPsmQiE0sG7KLX7faoIGKBOmeJVnD7/bDp02JF451XKnq+y?= =?us-ascii?Q?0/Hw6m+IaHUMaUTRHRHXlkWU1PypVaB3jc199roBLs4C/sEH/mCjKklq4tgT?= =?us-ascii?Q?OsJeb4J+ccoEO8izQfYfX0rEfKYuxmbCpNtR168ovtFe9mATzenHRmm+PcEM?= =?us-ascii?Q?OxMGaQikLOK1a5Mw7SYMmde5u2xJrw15ljrxtdmpM/3pvRErRCCn5X/C34d0?= =?us-ascii?Q?O+YI1So5hzQITTeuj25RO0D+YionWu9v2LLjxi8saeBUYT++PY17k5ta4Z8G?= =?us-ascii?Q?irBOuziCMHzpgbHKM2MVKYFIm0LLPBTC5N+1HSbt5LkE19EwlHKmJ5a2HoNi?= =?us-ascii?Q?LTAhRsV3VrxB2LaawsCt4IYfo6Hxe8PwlQSVsk3cKCgz6XskPiUTmNOo4aIs?= =?us-ascii?Q?j7gxuPHyiurJqwVxvYDqxtRKbH0/AXLIUyBWxwRhCAkfOCacta1xCCEU5njW?= =?us-ascii?Q?8m/sa1y3MSMMzO2j7vCZi1K9TaUxh+lzufro77Qn6yO7oOf7+fD91acD2jYW?= =?us-ascii?Q?pGBOAZlv2HcNn5GHNzCwtinBURSded/sSXPzJI1EcqeCo7kOzobvD5uXuJwc?= =?us-ascii?Q?LsJwiL+rLEd8EeXwrtRNATtPjTr1hKN10ulUMYaMbRQTUT9aR1ppmrDuxHpU?= =?us-ascii?Q?cuD4ZOOZlFvmREzzy6EOYTYXdtb3pfSB4wzEi85JWEklaC/EHkwMU80QGkQp?= =?us-ascii?Q?/0BLk1wlso5Ul/vSNU+7BXZXj4YEo9YtrqFXeCuouONau1333e8IOxDqFo12?= =?us-ascii?Q?M3ln9dq10M3vtJRy8akBIMapAwiCcYWMQhD80hR1z9Dw3eZGZ2Ut4LbxFD3C?= =?us-ascii?Q?30RFZw15LWDyb0rELVYXxKJPXw8ORLpK6o31FEhNU5GtAcmbd02SPdetHCaN?= =?us-ascii?Q?5A=3D=3D?= X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: d7c64b98-1db9-460c-07cf-08dbd9b3ef92 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 31 Oct 2023 01:51:44.7597 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: KWsa5N7iZYLBjKExp5EfKN1r9/ulPEXs4xN3q6LY6aZuDkX5ExqFvtw1adIjTo+SF54rjLIhnuEVEF2blupv2CT8b1B+tJbg+HbGubn4pwU= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SEZPR06MB6926 X-Spam-Status: No, score=-0.8 required=5.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on groat.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (groat.vger.email [0.0.0.0]); Mon, 30 Oct 2023 18:52:35 -0700 (PDT) The UP Squared board implements certain features (pin control) through an on-board FPGA. Reported-by: kernel test robot Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V6 -> V7: There's no change. PATCH V5 -> PATCH V6 (1) Refer 2023/08/10 Linus Walleij review, cleaned up coding style and addressed review comments. PATCH V4 -> PATCH V5 (1) Fixed kernel test robot compiler warning. (2) Synchronizing upboard github to v1.0.5 tag. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/09 Linus Walleij review, cleaned up coding style and addressed review comments. PATCH V2 -> V3: There's no change. PATCH V1 -> V2: (1) Synchronized with upboard github to rc2 (2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed the regmap and acpi patches and implement in upboard pinctrl driver. (3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style issues, removed using gpio_xxxx API and removed including . --- drivers/pinctrl/Kconfig | 14 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-upboard.c | 1390 +++++++++++++++++++++++++++++ 3 files changed, 1405 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-upboard.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1cf74b0c42e5..cc8dae75289b 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -483,6 +483,20 @@ config PINCTRL_THUNDERBAY rate control and direction control. This module will be called as pinctrl-thunderbay. +config PINCTRL_UPBOARD + tristate "UP board FPGA pin controller" + depends on (X86 && ACPI) || COMPILE_TEST + depends on MFD_INTEL_UPBOARD_FPGA + select GENERIC_PINCONF + select PINMUX + select PINCONF + help + Pin controller for the FPGA GPIO lines on UP boards. Due to the + hardware layout, these are meant to be controlled in tandem with their + corresponding Intel SoC GPIOs. + To compile this driver as a module, choose M here: the module + will be called pinctrl-upboard. + config PINCTRL_ZYNQ bool "Pinctrl driver for Xilinx Zynq" depends on ARCH_ZYNQ diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e76f5cdc64b0..c366706d36e7 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o +obj-$(CONFIG_PINCTRL_UPBOARD) += pinctrl-upboard.o obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c new file mode 100644 index 000000000000..73d50a695aab --- /dev/null +++ b/drivers/pinctrl/pinctrl-upboard.c @@ -0,0 +1,1390 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board HAT pin controller driver + * remapping native pin to RPI pin and set CPLD pin dir + * + * Copyright (c) AAEON. All rights reserved. + * + * Authors: Gary Wang + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "intel/pinctrl-intel.h" + +/* for older kernel lost DIRECTION_IN/OUT definition */ +#ifndef GPIO_LINE_DIRECTION_IN +#define GPIO_LINE_DIRECTION_IN 1 +#define GPIO_LINE_DIRECTION_OUT 0 +#endif + +/* Offset from regs */ +#define REVID 0x000 +#define REVID_SHIFT 16 +#define REVID_MASK GENMASK(31, 16) +#define PADBAR 0x00c + +/* Offset from pad_regs */ +#define PADCFG0 0x000 +#define PADCFG0_RXEVCFG_SHIFT 25 +#define PADCFG0_RXEVCFG_MASK GENMASK(26, 25) +#define PADCFG0_RXEVCFG_LEVEL 0 +#define PADCFG0_RXEVCFG_EDGE 1 +#define PADCFG0_RXEVCFG_DISABLED 2 +#define PADCFG0_RXEVCFG_EDGE_BOTH 3 +#define PADCFG0_PREGFRXSEL BIT(24) +#define PADCFG0_RXINV BIT(23) +#define PADCFG0_GPIROUTIOXAPIC BIT(20) +#define PADCFG0_GPIROUTSCI BIT(19) +#define PADCFG0_GPIROUTSMI BIT(18) +#define PADCFG0_GPIROUTNMI BIT(17) +#define PADCFG0_PMODE_SHIFT 10 +#define PADCFG0_PMODE_MASK GENMASK(13, 10) +#define PADCFG0_PMODE_GPIO 0 +#define PADCFG0_GPIORXDIS BIT(9) +#define PADCFG0_GPIOTXDIS BIT(8) +#define PADCFG0_GPIORXSTATE BIT(1) +#define PADCFG0_GPIOTXSTATE BIT(0) + +#define PADCFG1 0x004 +#define PADCFG1_TERM_UP BIT(13) +#define PADCFG1_TERM_SHIFT 10 +#define PADCFG1_TERM_MASK GENMASK(12, 10) +#define PADCFG1_TERM_20K BIT(2) +#define PADCFG1_TERM_5K BIT(1) +#define PADCFG1_TERM_1K BIT(0) +#define PADCFG1_TERM_833 (BIT(1) | BIT(0)) + +#define PADCFG2 0x008 +#define PADCFG2_DEBEN BIT(0) +#define PADCFG2_DEBOUNCE_SHIFT 1 +#define PADCFG2_DEBOUNCE_MASK GENMASK(4, 1) + +#define DEBOUNCE_PERIOD_NSEC 31250 + +/* Additional features supported by the hardware */ +#define PINCTRL_FEATURE_DEBOUNCE BIT(0) +#define PINCTRL_FEATURE_1K_PD BIT(1) + +#define BOARD_UP_CHT01 0 +#define BOARD_UP_APL01 1 +#define BOARD_UP_UPCORE 2 +#define BOARD_UP_CORE_PLUS 3 +#define BOARD_AIOT_IP6801 4 +#define BOARD_UP_WHL01 5 +#define BOARD_UP_ISH 7 +#define BOARD_UPN_APL 8 +#define BOARD_UP_APL03 9 +#define BOARD_UPX_WHLite 10 +#define BOARD_UPX_TGL 11 +#define BOARD_UPX_EDGE_WHL2 12 +#define BOARD_UPN_EHL01 13 +#define BOARD_UPS_EHL01 BOARD_UPN_EHL01 +#define BOARD_UPX_ADLP01 15 +#define BOARD_UPN_ADLN01 16 +#define BOARD_UPS_ADLP01 BOARD_UPX_ADLP01 +#define BOARD_UP_ADLN01 18 + +struct upboard_pin { + struct regmap_field *funcbit; + struct regmap_field *enbit; + struct regmap_field *dirbit; + /* native pin controllers: number, base, irq */ + unsigned int gpio; + unsigned int base; + int irq; + void __iomem *regs; +}; + +struct upboard_pinctrl { + struct gpio_chip chip; + struct device *dev; + struct pinctrl_dev *pctldev; + struct pinctrl_desc *pctldesc; + struct upboard_pin *pins; + struct regmap *regmap; + const unsigned int *rpi_mapping; + int ident; +}; + +enum upboard_func0_fpgabit { + UPFPGA_I2C0_EN = 8, + UPFPGA_I2C1_EN = 9, + UPFPGA_CEC0_EN = 12, + UPFPGA_ADC0_EN = 14, +}; + +static const struct reg_field upboard_i2c0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN); + +static const struct reg_field upboard_i2c1_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN); + +static const struct reg_field upboard_adc0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN); + +/* Pin group information */ +struct upboard_pingroup { + const char *name; + const unsigned int *pins; + size_t npins; +}; + +/* Pin function information */ +struct upboard_function { + const char *name; + const char * const *groups; + size_t ngroups; +}; + +#define UPBOARD_BIT_TO_PIN(r, bit) \ + ((r) * UPFPGA_REGISTER_SIZE + (bit)) + +/* + * UP board data + */ + +#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id)) + +#define UPBOARD_UP_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UP_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +#define UPBOARD_PIN_GROUP(n, p) \ + { \ + .name = (n), \ + .pins = (p), \ + .npins = ARRAY_SIZE((p)), \ + } + +#define FUNCTION(n, g) \ + { \ + .name = (n), \ + .groups = (g), \ + .ngroups = ARRAY_SIZE((g)), \ + } + +enum upboard_up_reg1_fpgabit { + UPFPGA_UP_I2C1_SDA, + UPFPGA_UP_I2C1_SCL, + UPFPGA_UP_ADC0, + UPFPGA_UP_GPIO17, + UPFPGA_UP_GPIO27, + UPFPGA_UP_GPIO22, + UPFPGA_UP_SPI_MOSI, + UPFPGA_UP_SPI_MISO, + UPFPGA_UP_SPI_CLK, + UPFPGA_UP_I2C0_SDA, + UPFPGA_UP_GPIO5, + UPFPGA_UP_GPIO6, + UPFPGA_UP_PWM1, + UPFPGA_UP_I2S_FRM, + UPFPGA_UP_GPIO26, + UPFPGA_UP_UART1_TX, +}; + +enum upboard_up_reg2_fpgabit { + UPFPGA_UP_UART1_RX, + UPFPGA_UP_I2S_CLK, + UPFPGA_UP_GPIO23, + UPFPGA_UP_GPIO24, + UPFPGA_UP_GPIO25, + UPFPGA_UP_SPI_CS0, + UPFPGA_UP_SPI_CS1, + UPFPGA_UP_I2C0_SCL, + UPFPGA_UP_PWM0, + UPFPGA_UP_GPIO16, + UPFPGA_UP_I2S_DIN, + UPFPGA_UP_I2S_DOUT, +}; + +#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17 +#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16 + +static struct pinctrl_pin_desc upboard_up_pins[] = { + UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg), + UPBOARD_UP_PIN_NAME(0, UART1_RTS), + UPBOARD_UP_PIN_NAME(0, GPIO27), + UPBOARD_UP_PIN_NAME(0, GPIO22), + UPBOARD_UP_PIN_NAME(0, SPI_MOSI), + UPBOARD_UP_PIN_NAME(0, SPI_MISO), + UPBOARD_UP_PIN_NAME(0, SPI_CLK), + UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(0, GPIO5), + UPBOARD_UP_PIN_NAME(0, GPIO6), + UPBOARD_UP_PIN_NAME(0, PWM1), + UPBOARD_UP_PIN_NAME(0, I2S_FRM), + UPBOARD_UP_PIN_NAME(0, GPIO26), + UPBOARD_UP_PIN_NAME(0, UART1_TX), + /* register 1 */ + UPBOARD_UP_PIN_NAME(1, UART1_RX), + UPBOARD_UP_PIN_NAME(1, I2S_CLK), + UPBOARD_UP_PIN_NAME(1, GPIO23), + UPBOARD_UP_PIN_NAME(1, GPIO24), + UPBOARD_UP_PIN_NAME(1, GPIO25), + UPBOARD_UP_PIN_NAME(1, SPI_CS0), + UPBOARD_UP_PIN_NAME(1, SPI_CS1), + UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(1, PWM0), + UPBOARD_UP_PIN_NAME(1, UART1_CTS), + UPBOARD_UP_PIN_NAME(1, I2S_DIN), + UPBOARD_UP_PIN_NAME(1, I2S_DOUT), +}; + +static const unsigned int upboard_up_rpi_mapping[] = { + UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UP_BIT_TO_PIN(0, ADC0), + UPBOARD_UP_BIT_TO_PIN(0, GPIO5), + UPBOARD_UP_BIT_TO_PIN(0, GPIO6), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI), + UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK), + UPBOARD_UP_BIT_TO_PIN(1, PWM0), + UPBOARD_UP_BIT_TO_PIN(0, PWM1), + UPBOARD_UP_BIT_TO_PIN(0, UART1_TX), + UPBOARD_UP_BIT_TO_PIN(1, UART1_RX), + UPBOARD_UP_BIT_TO_PIN(1, GPIO16), + UPBOARD_UP_BIT_TO_PIN(0, GPIO17), + UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK), + UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT), + UPBOARD_UP_BIT_TO_PIN(0, GPIO22), + UPBOARD_UP_BIT_TO_PIN(1, GPIO23), + UPBOARD_UP_BIT_TO_PIN(1, GPIO24), + UPBOARD_UP_BIT_TO_PIN(1, GPIO25), + UPBOARD_UP_BIT_TO_PIN(0, GPIO26), + UPBOARD_UP_BIT_TO_PIN(0, GPIO27), +}; + +static const unsigned int uart1_pins[] = { 14, 15, 16, 17 }; +static const unsigned int uart2_pins[] = { 25, 27 }; +static const unsigned int i2c0_pins[] = { 0, 1 }; +static const unsigned int i2c1_pins[] = { 2, 3 }; +static const unsigned int spi2_pins[] = { 8, 9, 10, 11 }; +static const unsigned int i2s0_pins[] = { 18, 19, 20, 21 }; +static const unsigned int pwm0_pins[] = { 12 }; +static const unsigned int pwm1_pins[] = { 13 }; +static const unsigned int adc0_pins[] = { 4 }; + +static const struct upboard_pingroup pin_groups[] = { + UPBOARD_PIN_GROUP("uart1_grp", uart1_pins), + UPBOARD_PIN_GROUP("uart2_grp", uart2_pins), + UPBOARD_PIN_GROUP("i2c0_grp", i2c0_pins), + UPBOARD_PIN_GROUP("i2c1_grp", i2c1_pins), + UPBOARD_PIN_GROUP("spi2_grp", spi2_pins), + UPBOARD_PIN_GROUP("i2s0_grp", i2s0_pins), + UPBOARD_PIN_GROUP("pwm0_grp", pwm0_pins), + UPBOARD_PIN_GROUP("pwm1_grp", pwm1_pins), + UPBOARD_PIN_GROUP("adc0_grp", adc0_pins), +}; + +static const char * const uart1_groups[] = { "uart1_grp" }; +static const char * const uart2_groups[] = { "uart2_grp" }; +static const char * const i2c0_groups[] = { "i2c0_grp" }; +static const char * const i2c1_groups[] = { "i2c1_grp" }; +static const char * const spi2_groups[] = { "spi2_grp" }; +static const char * const i2s0_groups[] = { "i2s0_grp" }; +static const char * const pwm0_groups[] = { "pwm0_grp" }; +static const char * const pwm1_groups[] = { "pwm1_grp" }; +static const char * const adc0_groups[] = { "adc0_grp" }; + +static const struct upboard_function pin_functions[] = { + FUNCTION("uart1", uart1_groups), + FUNCTION("uart2", uart2_groups), + FUNCTION("i2c0", i2c0_groups), + FUNCTION("i2c1", i2c1_groups), + FUNCTION("spi2", spi2_groups), + FUNCTION("i2s0", i2s0_groups), + FUNCTION("pwm0", pwm0_groups), + FUNCTION("pwm1", pwm1_groups), + FUNCTION("adc0", adc0_groups), +}; + +/* + * UP^2 board data + */ + +#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id)) + +#define UPBOARD_UP2_PIN_MUX(r, bit, data) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + .name = "PINMUX", \ + .drv_data = (void *)(data), \ + } + +#define UPBOARD_UP2_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP2_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_up2_reg0_fpgabit { + UPFPGA_UP2_UART1_TXD, + UPFPGA_UP2_UART1_RXD, + UPFPGA_UP2_UART1_RTS, + UPFPGA_UP2_UART1_CTS, + UPFPGA_UP2_GPIO3_ADC0, + UPFPGA_UP2_GPIO5_ADC2, + UPFPGA_UP2_GPIO6_ADC3, + UPFPGA_UP2_GPIO11, + UPFPGA_UP2_EXHAT_LVDS1n, + UPFPGA_UP2_EXHAT_LVDS1p, + UPFPGA_UP2_SPI2_TXD, + UPFPGA_UP2_SPI2_RXD, + UPFPGA_UP2_SPI2_FS1, + UPFPGA_UP2_SPI2_FS0, + UPFPGA_UP2_SPI2_CLK, + UPFPGA_UP2_SPI1_TXD, +}; + +enum upboard_up2_reg1_fpgabit { + UPFPGA_UP2_SPI1_RXD, + UPFPGA_UP2_SPI1_FS1, + UPFPGA_UP2_SPI1_FS0, + UPFPGA_UP2_SPI1_CLK, + UPFPGA_UP2_BIT20, + UPFPGA_UP2_BIT21, + UPFPGA_UP2_BIT22, + UPFPGA_UP2_BIT23, + UPFPGA_UP2_PWM1, + UPFPGA_UP2_PWM0, + UPFPGA_UP2_EXHAT_LVDS0n, + UPFPGA_UP2_EXHAT_LVDS0p, + UPFPGA_UP2_I2C0_SCL, + UPFPGA_UP2_I2C0_SDA, + UPFPGA_UP2_I2C1_SCL, + UPFPGA_UP2_I2C1_SDA, +}; + +enum upboard_up2_reg2_fpgabit { + UPFPGA_UP2_EXHAT_LVDS3n, + UPFPGA_UP2_EXHAT_LVDS3p, + UPFPGA_UP2_EXHAT_LVDS4n, + UPFPGA_UP2_EXHAT_LVDS4p, + UPFPGA_UP2_EXHAT_LVDS5n, + UPFPGA_UP2_EXHAT_LVDS5p, + UPFPGA_UP2_I2S_SDO, + UPFPGA_UP2_I2S_SDI, + UPFPGA_UP2_I2S_WS_SYNC, + UPFPGA_UP2_I2S_BCLK, + UPFPGA_UP2_EXHAT_LVDS6n, + UPFPGA_UP2_EXHAT_LVDS6p, + UPFPGA_UP2_EXHAT_LVDS7n, + UPFPGA_UP2_EXHAT_LVDS7p, + UPFPGA_UP2_EXHAT_LVDS2n, + UPFPGA_UP2_EXHAT_LVDS2p, +}; + +static struct pinctrl_pin_desc upboard_up2_pins[] = { + UPBOARD_UP2_PIN_NAME(0, UART1_TXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RTS), + UPBOARD_UP2_PIN_NAME(0, UART1_CTS), + UPBOARD_UP2_PIN_NAME(0, GPIO3_ADC0), + UPBOARD_UP2_PIN_NAME(0, GPIO5_ADC2), + UPBOARD_UP2_PIN_NAME(0, GPIO6_ADC3), + UPBOARD_UP2_PIN_NAME(0, GPIO11), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p), + UPBOARD_UP2_PIN_NAME(0, SPI2_TXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_RXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS1), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS0), + UPBOARD_UP2_PIN_NAME(0, SPI2_CLK), + UPBOARD_UP2_PIN_NAME(0, SPI1_TXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_RXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS1), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS0), + UPBOARD_UP2_PIN_NAME(1, SPI1_CLK), + UPBOARD_UP2_PIN_MUX(1, 4, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_MUX(1, 5, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_MUX(1, 6, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_MUX(1, 7, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(1, PWM1), + UPBOARD_UP2_PIN_NAME(1, PWM0), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p), + UPBOARD_UP2_PIN_NAME(2, I2S_SDO), + UPBOARD_UP2_PIN_NAME(2, I2S_SDI), + UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC), + UPBOARD_UP2_PIN_NAME(2, I2S_BCLK), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p), +}; + +static const unsigned int upboard_up2_rpi_mapping[] = { + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO3_ADC0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO11), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, PWM0), + UPBOARD_UP2_BIT_TO_PIN(1, PWM1), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO6_ADC3), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO5_ADC2), +}; + +/* + * UP Core board + CREX carrier board data + */ + +#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id) \ + (UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id)) + +#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_upcore_crex_reg1_fpgabit { + UPFPGA_UPCORE_CREX_I2C0_SDA, + UPFPGA_UPCORE_CREX_I2C0_SCL, + UPFPGA_UPCORE_CREX_I2C1_SDA, + UPFPGA_UPCORE_CREX_I2C1_SCL, + UPFPGA_UPCORE_CREX_SPI2_CS0, + UPFPGA_UPCORE_CREX_SPI2_CS1, + UPFPGA_UPCORE_CREX_SPI2_MOSI, + UPFPGA_UPCORE_CREX_SPI2_MISO, + UPFPGA_UPCORE_CREX_SPI2_CLK, + UPFPGA_UPCORE_CREX_UART1_TXD, + UPFPGA_UPCORE_CREX_UART1_RXD, + UPFPGA_UPCORE_CREX_PWM0, + UPFPGA_UPCORE_CREX_PWM1, + UPFPGA_UPCORE_CREX_I2S2_FRM, + UPFPGA_UPCORE_CREX_I2S2_CLK, + UPFPGA_UPCORE_CREX_I2S2_RX, +}; + +enum upboard_upcore_crex_reg2_fpgabit { + UPFPGA_UPCORE_CREX_I2S2_TX, + UPFPGA_UPCORE_CREX_GPIO0, + UPFPGA_UPCORE_CREX_GPIO2, + UPFPGA_UPCORE_CREX_GPIO3, + UPFPGA_UPCORE_CREX_GPIO4, + UPFPGA_UPCORE_CREX_GPIO9, +}; + +static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = { + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX), + /* register 1 */ + UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0), + UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9), +}; + +static unsigned int upboard_upcore_crex_rpi_mapping[] = { + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX), +}; + +/* + * UP Core board + CRST02 carrier board data + */ + +#define upboard_upcore_crst02_pins upboard_upcore_crex_pins +#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping + +static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function, + unsigned int group) +{ + return 0; +} + +static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 0); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 1); + if (ret) + return ret; + } + + return 0; +} + +static int upboard_fpga_request_free(struct pinctrl_dev *pctldev, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 1); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 0); + if (ret) + return ret; + } + + return 0; +} + +static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + + p = pd->drv_data; + + return regmap_field_write(p->dirbit, input); +} + +static int upboard_get_functions_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static int upboard_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int *num_groups) +{ + *groups = NULL; + *num_groups = 0; + return 0; +} + +static const struct pinmux_ops upboard_pinmux_ops = { + .get_functions_count = upboard_get_functions_count, + .get_function_groups = upboard_get_function_groups, + .get_function_name = upboard_get_function_name, + .set_mux = upboard_set_mux, + .gpio_request_enable = upboard_fpga_request_enable, + .gpio_set_direction = upboard_fpga_set_direction, +}; + +static int upboard_get_groups_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static void upboard_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned int pin) +{ + struct upboard_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + void __iomem *padcfg; + u32 cfg0, cfg1, mode; + int locked; + + if (pctrl->pins[pin].regs == NULL) + return; + + cfg0 = readl(pctrl->pins[pin].regs); + cfg1 = readl(pctrl->pins[pin].regs + PADCFG1); + + mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT; + if (mode == PADCFG0_PMODE_GPIO) + seq_puts(s, "GPIO "); + else + seq_printf(s, "mode %d ", mode); + + seq_printf(s, "0x%08x 0x%08x", cfg0, cfg1); + + /* Dump the additional PADCFG registers if available */ + padcfg = pctrl->pins[pin].regs + PADCFG2; + if (padcfg) + seq_printf(s, " 0x%08x", readl(padcfg)); + + seq_printf(s, " 0x%08x", pctrl->pins[pin].regs); +} + +static const struct pinctrl_ops upboard_pinctrl_ops = { + .get_groups_count = upboard_get_groups_count, + .get_group_name = upboard_get_group_name, + .pin_dbg_show = upboard_pin_dbg_show, +}; + +static struct pinctrl_desc upboard_up_pinctrl_desc = { + .pins = upboard_up_pins, + .npins = ARRAY_SIZE(upboard_up_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_up2_pinctrl_desc = { + .pins = upboard_up2_pins, + .npins = ARRAY_SIZE(upboard_up2_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = { + .pins = upboard_upcore_crex_pins, + .npins = ARRAY_SIZE(upboard_upcore_crex_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = { + .pins = upboard_upcore_crst02_pins, + .npins = ARRAY_SIZE(upboard_upcore_crst02_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name, int id) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int offset[pctrl->pctldesc->npins]; + int i, cnt; + + /* find all pins */ + for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) { + if (strstr(pctrl->pctldesc->pins[i].name, name)) + offset[cnt++] = i; + } + + /* change to alternate function */ + for (i = 0; i < cnt; i++) { + if (pctrl->pins[offset[i]].regs == NULL) + continue; + bool input = false; + int mode = 0; /* default GPIO */ + unsigned int val = readl(pctrl->pins[offset[i]].regs); + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C") || + strstr(pctrl->pctldesc->pins[offset[i]].name, "PINMUX")) { + mode = 1; + switch (id) { + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 2; + break; + default: + break; + } + + val |= mode<pins[offset[i]].regs); + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + continue; + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "UART")) { + mode = 1; + switch (id) { + case BOARD_UPN_EHL01: + mode = 4; + break; + case BOARD_UP_ADLN01: + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 2; + break; + default: + break; + } + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SPI")) { + mode = 1; + switch (id) { + case BOARD_UP_WHL01: + mode = 3; + break; + case BOARD_UP_ADLN01: + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 7; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MOSI")) { + val &= ~PADCFG0_GPIOTXDIS; + val |= PADCFG0_GPIORXDIS; + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + val |= PADCFG0_GPIORXDIS; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CLK")) { + val &= ~PADCFG0_GPIOTXDIS; + val |= PADCFG0_GPIORXDIS; + } + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS0")) + val |= PADCFG0_GPIORXDIS; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS1")) + continue; + break; + default: + break; + } + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2S")) { + mode = 1; + switch (id) { + case BOARD_UPX_ADLP01: + mode = 4; + break; + default: + break; + } + } + + val |= mode<pins[offset[i]].regs); + + /* input pins */ + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC")) { + input = true; + if (id == BOARD_UP_APL01) + upboard_fpga_request_enable(pctrl->pctldev, NULL, offset[i]); + else + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SDI")) + input = true; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i], input); + } +} + +static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[gpio]; + struct pinctrl_gpio_range *range; + + range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin); + if (!range) + return -ENODEV; + + return range->base; +} + +static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + + upboard_fpga_request_enable(pctrl->pctldev, NULL, pin); + return pinctrl_gpio_request(gpio); +} + +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int gpio = upboard_rpi_to_native_gpio(gc, offset); + unsigned int pin = pctrl->rpi_mapping[offset]; + + pinctrl_gpio_free(gpio); + + upboard_alt_func_enable(gc, pctrl->pctldesc->pins[pin].name, pctrl->ident); +} + +static int upboard_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + if (!pctrl->pins[pin].regs) + return -EINVAL; + + unsigned int padcfg0 = readl(pctrl->pins[pin].regs); + + if (padcfg0 & PADCFG0_GPIOTXDIS) + return GPIO_LINE_DIRECTION_IN; + + return GPIO_LINE_DIRECTION_OUT; +} + +static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + int reg_val = readl(pctrl->pins[pin].regs); + + if (gpio < 0) + return gpio; + + /* APL03 board open drain GPIO */ + if (pctrl->ident == BOARD_UP_APL03) { + switch (pin) { + case 0: + case 1: + case 9: + case 23: + return reg_val & 0x00000003; + default: + break; + } + } + + if (!(reg_val & PADCFG0_GPIOTXDIS)) + return !!(reg_val & PADCFG0_GPIOTXSTATE); + + return !!(reg_val & PADCFG0_GPIORXSTATE); +} + +static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + int reg_val = readl(pctrl->pins[pin].regs); + + if (gpio < 0) + return; + + /* APL03 board open drain GPIO */ + if (pctrl->ident == BOARD_UP_APL03) { + switch (pin) { + case 0: + case 1: + case 9: + case 23: + if (value) + reg_val |= PADCFG0_GPIOTXDIS; + else + reg_val &= ~PADCFG0_GPIOTXDIS; + + writel(reg_val, pctrl->pins[pin].regs); + return; + default: + break; + } + } + if (value) + reg_val |= PADCFG0_GPIOTXSTATE; + else + reg_val &= ~PADCFG0_GPIOTXSTATE; + writel(reg_val, pctrl->pins[pin].regs); +} + +static int upboard_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, pin, true); + + return pinctrl_gpio_direction_input(gpio); +} + +static int upboard_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, pin, false); + + return pinctrl_gpio_direction_output(gpio); +} + +static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int gpio, unsigned int reg) +{ + struct platform_device *pdev = to_platform_device(gc->parent); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct intel_pinctrl *pctrl = gpiochip_get_data(gc); + size_t nregs; + void __iomem *base = NULL; + u32 offset, value; + int pin = gpio-gc->base; + + /* check Intel pin controller for all platform */ + if (pctrl->ncommunities > 1) { + int i, j, offset = 0; + + pin = -1; + for (i = 0; i < pctrl->ncommunities; i++) { + struct intel_community *community = &pctrl->communities[i]; + + for (j = 0; j < community->ngpps ; j++) { + struct intel_padgroup gpps = community->gpps[j]; + + if (gpio < gc->base + gpps.gpio_base + gpps.size) { + res = platform_get_resource(pdev, IORESOURCE_MEM, + community->barno); + pin = gpio-gc->base-gpps.gpio_base + + offset-community->pin_base; + break; + } + + offset += gpps.size; + } + + if (pin != -1) + break; + } + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (base == NULL) + return base; + + offset = readl(base + PADBAR); + value = readl(base + REVID); + + if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94) + nregs = 4; + else + nregs = 2; + + return base + offset + reg + pin * nregs * 4; +} + +int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga, + struct upboard_pinctrl *pctrl, + const char *propname, + const char *pinctl_name, + unsigned int pin_offset) +{ + struct gpio_descs *descs; + int ret, i; + + descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS); + if (IS_ERR(descs)) { + ret = PTR_ERR(descs); + if (ret != -EPROBE_DEFER) + dev_err(fpga->dev, "Failed to get %s gpios", propname); + + return ret; + } + + for (i = 0; i < descs->ndescs; i++) { + struct gpio_desc *desc = descs->desc[i]; + struct gpio_chip *gc = gpiod_to_chip(desc); + + pctrl->pins[i].gpio = desc_to_gpio(desc); + pctrl->pins[i].base = gc->base; + pctrl->pins[i].irq = gpiod_to_irq(desc); + pctrl->pins[i].regs = + upboard_get_regs(gc, + desc_to_gpio(desc) - gc->base, + PADCFG0); + + /* The GPIOs may not be contiguous, so add them 1-by-1 */ + ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name, + desc_to_gpio(desc) - gc->base, + pin_offset + i, 1); + + if (ret) + return ret; + } + + /* dispose acpi resource */ + devm_gpiod_put_array(fpga->dev, descs); + + return ret; +} + +static struct gpio_chip upboard_gpio_chip = { + .label = "Raspberry Pi compatible UP GPIO", + .base = 0, + .request = upboard_gpio_request, + .free = upboard_gpio_free, + .get = upboard_gpio_get, + .set = upboard_gpio_set, + .get_direction = upboard_gpio_get_direction, + .direction_input = upboard_gpio_direction_input, + .direction_output = upboard_gpio_direction_output, + .owner = THIS_MODULE, +}; + +/* DMI Matches to assign pin mapping driver data */ +static const struct dmi_system_id upboard_dmi_table[] __initconst = { + { + .ident = BOARD_UP_APL01, + .matches = { /* UP SQUARED */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + }, + }, + { + .ident = BOARD_UP_APL01, + .matches = { /* UP SQUARED Pro*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-APL01"), + }, + }, + { + .ident = BOARD_UP_APL03, + .matches = { /* UP 4000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"), + }, + }, + { + .ident = BOARD_UP_WHL01, + .matches = { /* UPX WHL */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-WHL01"), + }, + }, + { + .ident = BOARD_UPX_TGL, + .matches = { /* UP i11 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-TGL01"), + }, + }, + { + .ident = BOARD_UPN_EHL01, + .matches = { /* UP 6000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"), + }, + }, + { + .ident = BOARD_UPS_EHL01, + .matches = { /* UP squared v2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"), + }, + }, + { + .ident = BOARD_UPX_ADLP01, + .matches = { /* UP Xtreme i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"), + }, + }, + { + .ident = BOARD_UPN_ADLN01, + .matches = { /* UP 7000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-ADLN01"), + }, + }, + { + .ident = BOARD_UPS_ADLP01, + .matches = { /* UP Squared i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-ADLP01"), + }, + }, + { + .ident = BOARD_UP_ADLN01, + .matches = { /* UP 7000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-ADLN01"), + }, + }, + { } /* Terminating entry */ +}; + +static int __init upboard_pinctrl_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent); + struct pinctrl_desc *pctldesc; + struct upboard_pinctrl *pctrl; + struct upboard_pin *pins; + const struct dmi_system_id *system_id; + const unsigned int *rpi_mapping; + unsigned int ngpio; + int ret; + int i; + /* default */ + int board_id = BOARD_UP_APL03; + + /* check board id to arrange driver data */ + system_id = dmi_first_match(upboard_dmi_table); + if (system_id) + board_id = system_id->ident; + dev_info(&pdev->dev, "compatible upboard id %d", board_id); + switch (board_id) { + case BOARD_UP_APL01: + pctldesc = &upboard_up2_pinctrl_desc; + rpi_mapping = upboard_up2_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up2_rpi_mapping); + break; + case BOARD_UP_UPCORE: + pctldesc = &upboard_upcore_crex_pinctrl_desc; + rpi_mapping = upboard_upcore_crex_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping); + break; + case BOARD_UP_CORE_PLUS: + pctldesc = &upboard_upcore_crst02_pinctrl_desc; + rpi_mapping = upboard_upcore_crst02_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping); + break; + default: + pctldesc = &upboard_up_pinctrl_desc; + rpi_mapping = upboard_up_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up_rpi_mapping); + break; + } + + pctldesc->name = dev_name(&pdev->dev); + + pins = devm_kcalloc(&pdev->dev, pctldesc->npins, sizeof(*pins), GFP_KERNEL); + if (!pins) + return -ENOMEM; + + /* initialise pins */ + for (i = 0; i < pctldesc->npins; i++) { + struct upboard_pin *pin = &pins[i]; + struct pinctrl_pin_desc *pd = (struct pinctrl_pin_desc *) &pctldesc->pins[i]; + struct reg_field fldconf = {0}; + unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE); + unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE; + + pin->funcbit = NULL; + + if (pd->drv_data) { + fldconf = *(struct reg_field *)pd->drv_data; + + pin->funcbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->funcbit)) + return PTR_ERR(pin->funcbit); + } + + fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + pin->enbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->enbit)) + return PTR_ERR(pin->enbit); + + fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + pin->dirbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->dirbit)) + return PTR_ERR(pin->dirbit); + + pd->drv_data = pin; + } + + /* create a new pinctrl device and register it */ + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->rpi_mapping = rpi_mapping; + pctrl->chip = upboard_gpio_chip; + pctrl->pctldesc = pctldesc; + pctrl->chip.parent = &pdev->dev; + pctrl->chip.ngpio = ngpio; + pctrl->pins = pins; + pctrl->ident = board_id; + + ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl); + if (ret) + return ret; + + pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl); + if (IS_ERR(pctrl->pctldev)) + return PTR_ERR(pctrl->pctldev); + + /* add acpi pin mapping according to external-gpios key */ + ret = upboard_acpi_node_pin_mapping(fpga, pctrl, + "external", + dev_name(&pdev->dev), + 0); + if (ret) + return ret; + + upboard_alt_func_enable(&pctrl->chip, "I2C", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "SPI", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "UART", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "I2S", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "PWM", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "ADC", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "PINMUX", pctrl->ident); + + return ret; +} + +static struct platform_driver upboard_pinctrl_driver = { + .driver = { + .name = "upboard-pinctrl", + }, +}; +module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board HAT pin controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-pinctrl"); -- 2.17.1