Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Antoniu Miclaus <antoniu.miclaus@analog.com>
To:     Antoniu Miclaus <antoniu.miclaus@analog.com>,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        <linux-hwmon@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] hwmon: ltc2991: remove device reference from state
Date:   Tue, 31 Oct 2023 11:56:46 +0200
Message-ID: <20231031095647.48376-1-antoniu.miclaus@analog.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

Remove device reference from struct ltc2991_state since it is used only
inside the init function.

Pass the struct device as parameter to the init function instead.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
 drivers/hwmon/ltc2991.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/ltc2991.c b/drivers/hwmon/ltc2991.c
index bd63c61129a9..773e7211643f 100644
--- a/drivers/hwmon/ltc2991.c
+++ b/drivers/hwmon/ltc2991.c
@@ -54,7 +54,6 @@
 #define LTC2991_VCC_CH_NR		0
 
 struct ltc2991_state {
-	struct device		*dev;
 	struct regmap		*regmap;
 	u32			r_sense_uohm[LTC2991_MAX_CHANNEL];
 	bool			temp_en[LTC2991_MAX_CHANNEL];
@@ -283,19 +282,19 @@ static const struct regmap_config ltc2991_regmap_config = {
 	.max_register = 0x1D,
 };
 
-static int ltc2991_init(struct ltc2991_state *st)
+static int ltc2991_init(struct ltc2991_state *st, struct device *dev)
 {
 	struct fwnode_handle *child;
 	int ret;
 	u32 val, addr;
 	u8 v5_v8_reg_data = 0, v1_v4_reg_data = 0;
 
-	ret = devm_regulator_get_enable(st->dev, "vcc");
+	ret = devm_regulator_get_enable(dev, "vcc");
 	if (ret)
-		return dev_err_probe(st->dev, ret,
+		return dev_err_probe(dev, ret,
 				     "failed to enable regulator\n");
 
-	device_for_each_child_node(st->dev, child) {
+	device_for_each_child_node(dev, child) {
 		ret = fwnode_property_read_u32(child, "reg", &addr);
 		if (ret < 0) {
 			fwnode_handle_put(child);
@@ -312,7 +311,7 @@ static int ltc2991_init(struct ltc2991_state *st)
 					       &val);
 		if (!ret) {
 			if (!val)
-				return dev_err_probe(st->dev, -EINVAL,
+				return dev_err_probe(dev, -EINVAL,
 						     "shunt resistor value cannot be zero\n");
 
 			st->r_sense_uohm[addr] = val;
@@ -361,18 +360,18 @@ static int ltc2991_init(struct ltc2991_state *st)
 
 	ret = regmap_write(st->regmap, LTC2991_V5_V8_CTRL, v5_v8_reg_data);
 	if (ret)
-		return dev_err_probe(st->dev, ret,
+		return dev_err_probe(dev, ret,
 				     "Error: Failed to set V5-V8 CTRL reg.\n");
 
 	ret = regmap_write(st->regmap, LTC2991_V1_V4_CTRL, v1_v4_reg_data);
 	if (ret)
-		return dev_err_probe(st->dev, ret,
+		return dev_err_probe(dev, ret,
 				     "Error: Failed to set V1-V4 CTRL reg.\n");
 
 	ret = regmap_write(st->regmap, LTC2991_PWM_TH_LSB_T_INT,
 			   LTC2991_REPEAT_ACQ_EN);
 	if (ret)
-		return dev_err_probe(st->dev, ret,
+		return dev_err_probe(dev, ret,
 				     "Error: Failed to set contiuous mode.\n");
 
 	/* Enable all channels and trigger conversions */
@@ -392,12 +391,11 @@ static int ltc2991_i2c_probe(struct i2c_client *client)
 	if (!st)
 		return -ENOMEM;
 
-	st->dev = &client->dev;
 	st->regmap = devm_regmap_init_i2c(client, &ltc2991_regmap_config);
 	if (IS_ERR(st->regmap))
 		return PTR_ERR(st->regmap);
 
-	ret = ltc2991_init(st);
+	ret = ltc2991_init(st, &client->dev);
 	if (ret)
 		return ret;
 
-- 
2.42.0