Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
From:   Dmitry Rokosov <ddrokosov@salutedevices.com>
To:     <lee@kernel.org>, <pavel@ucw.cz>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
        <andy.shevchenko@gmail.com>
CC:     <kernel@sberdevices.ru>, <rockosov@gmail.com>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-leds@vger.kernel.org>,
        George Stark <gnstark@salutedevices.com>,
        Dmitry Rokosov <ddrokosov@salutedevices.com>,
        Rob Herring <robh@kernel.org>
Subject: [PATCH v3 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
Date:   Wed, 1 Nov 2023 17:24:39 +0300
Message-ID: <20231101142445.8753-6-ddrokosov@salutedevices.com>
In-Reply-To: <20231101142445.8753-1-ddrokosov@salutedevices.com>
References: <20231101142445.8753-1-ddrokosov@salutedevices.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: George Stark <gnstark@salutedevices.com>

Get rid of the property "awinic,display-rows" and calculate it
in the driver using led definition nodes.

Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/leds/awinic,aw200xx.yaml         | 28 +++----------------
 1 file changed, 4 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
index 3da3633a242c..a6dced59599d 100644
--- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -36,11 +36,6 @@ properties:
   "#size-cells":
     const: 0
 
-  awinic,display-rows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Leds matrix size
-
   enable-gpios:
     maxItems: 1
 
@@ -63,31 +58,17 @@ patternProperties:
           since the chip has a single global setting.
           The maximum output current of each LED is calculated by the
           following formula:
-            IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+            IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
           And the minimum output current formula:
-            IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
+            IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
+          where max-current-switch-number is determinated by led configuration
+          and depends on how leds are physically connected to the led driver.
 
 required:
   - compatible
   - reg
   - "#address-cells"
   - "#size-cells"
-  - awinic,display-rows
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: awinic,aw20036
-    then:
-      properties:
-        awinic,display-rows:
-          enum: [1, 2, 3]
-    else:
-      properties:
-        awinic,display-rows:
-          enum: [1, 2, 3, 4, 5, 6, 7]
 
 additionalProperties: false
 
@@ -105,7 +86,6 @@ examples:
             reg = <0x3a>;
             #address-cells = <1>;
             #size-cells = <0>;
-            awinic,display-rows = <3>;
             enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
 
             led@0 {
-- 
2.36.0