Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
From:   Armin Wolf <W_Armin@gmx.de>
To:     pali@kernel.org
Cc:     jdelvare@suse.com, linux@roeck-us.net, linux-hwmon@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 4/9] hwmon: (dell-smm) Move DMI config handling to module init
Date:   Fri,  3 Nov 2023 19:57:11 +0100
Message-Id: <20231103185716.11007-5-W_Armin@gmx.de>
In-Reply-To: <20231103185716.11007-1-W_Armin@gmx.de>
References: <20231103185716.11007-1-W_Armin@gmx.de>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
UI-OutboundReport: notjunk:1;M01:P0:eOqffFKqppA=;9s8wBS2MSQNX1eD90KUchYyhmIp
 giE1IU4Ze+pK2moU7XawAt6s78YRJlDHiVdN5Of47Ini6pzdCU92pCra6Biosu+jmWbFs/dtT
 YlvJfraslIEM9EjAtRPOw42BXWGdaOK8i8aUek6krmIhA4i3dVG42GvoeHxwg+S/mHX5sYg/U
 RfkiAtM3U72sIUlgo1dQBOPQJn9OAR3X5JDliVVY26J2cdR6Q6bKo+zWY9CEudhmzrZmiMhvp
 /Sw6jNsdV0dygNdo5Pf2hNvcIncCLN2qiBBVdFq3VPLsUU5nU0AnUc2VJFYJzmRbNXiw+x1Su
 btgGx9453dfTbezXR4vLfE5/hIE0ym1l8V27W2lpbHpZ6uCi2D4+JcooeDmrtbctnOSl1yIU7
 HUU0QBh8qY/bU+XHPZNh7yOahQQpSCd0PEuwmf4VOZAk3HR5WPZmiCaEpWjCo7xDPbswGCII3
 Waw4Rwnox1Me2Z0CSHA6YrV7ssOGPm8ryx15s0faG3HkxfGkmP8Kah91nkHfHsiSLljavmXX5
 oSjSFUdrEEeoEgSl546ZVESGICp0A4Wr4J7PzluQ3ZlnFX0Bhip+XXMhsxoPZ5rtO5EVrkxEi
 +Am6+Scl2I7490Jo9ztsk0+GuxKwrlu9HkUOt10UOHlY0F10lmBvVmSeopB8ebmf/eler/GJl
 xac9PuE01ey4ZYe8iDiDplIslBSqGRr+hoYRTGkHvpr1PCtGiePsLl4ERHkV4FKagSTQfEfDZ
 M3M1RoeFC2OAMlz0+tMnB1J506LD1BLWAg4DhODpWogluGIBaWmkPUEvZQpD9bLH8uCaGAuJv
 g21iX+5Li1br6O24ecpKMt7Ycb7zu9tqaL0pIOkeuAM1BAi3kxOolFXxt1kBCrvJniGHlBhQA
 G8I/WEB6QjLBmLlqP8MfQrYnCflW/wvMYy0Tao+UXnIHZOUUlTw+JZqX0JoCm5wZZ7oohVK9C
 W+D+xSk4YM2iOm4LcTVFeBaL20o=
Precedence: bulk

Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables holding config data would
have to drop their __initconst attribute.
Prevent this by moving the config handling to module init.

Tested-by: <serverror@serverror.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
=2D--
 drivers/hwmon/dell-smm-hwmon.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon=
.c
index 3a792faf2369..3d14a3baf8e4 100644
=2D-- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1370,7 +1370,6 @@ static const struct dmi_system_id i8k_whitelist_fan_=
control[] __initconst =3D {
 static int __init dell_smm_probe(struct platform_device *pdev)
 {
 	struct dell_smm_data *data;
-	const struct dmi_system_id *id;
 	int ret;

 	data =3D devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERN=
EL);
@@ -1386,21 +1385,6 @@ static int __init dell_smm_probe(struct platform_de=
vice *pdev)
 	strscpy(data->bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
 		sizeof(data->bios_machineid));

-	/*
-	 * Set fan multiplier and maximal fan speed from dmi config
-	 * Values specified in module parameters override values from dmi
-	 */
-	id =3D dmi_first_match(i8k_dmi_table);
-	if (id && id->driver_data) {
-		const struct i8k_config_data *conf =3D id->driver_data;
-
-		if (!fan_mult && conf->fan_mult)
-			fan_mult =3D conf->fan_mult;
-
-		if (!fan_max && conf->fan_max)
-			fan_max =3D conf->fan_max;
-	}
-
 	/* All options must not be 0 */
 	data->i8k_fan_mult =3D fan_mult ? : I8K_FAN_MULT;
 	data->i8k_fan_max =3D fan_max ? : I8K_FAN_HIGH;
@@ -1429,6 +1413,7 @@ static struct platform_device *dell_smm_device;
 static void __init dell_smm_init_dmi(void)
 {
 	struct i8k_fan_control_data *control;
+	struct i8k_config_data *config;
 	const struct dmi_system_id *id;

 	if (dmi_check_system(i8k_blacklist_fan_support_dmi_table)) {
@@ -1449,6 +1434,20 @@ static void __init dell_smm_init_dmi(void)
 		}
 	}

+	/*
+	 * Set fan multiplier and maximal fan speed from DMI config.
+	 * Values specified in module parameters override values from DMI.
+	 */
+	id =3D dmi_first_match(i8k_dmi_table);
+	if (id && id->driver_data) {
+		config =3D id->driver_data;
+		if (!fan_mult && config->fan_mult)
+			fan_mult =3D config->fan_mult;
+
+		if (!fan_max && config->fan_max)
+			fan_max =3D config->fan_max;
+	}
+
 	id =3D dmi_first_match(i8k_whitelist_fan_control);
 	if (id && id->driver_data) {
 		control =3D id->driver_data;
=2D-
2.39.2