Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3;
From:   Wolfram Sang <wsa+renesas@sang-engineering.com>
To:     linux-renesas-soc@vger.kernel.org
Cc:     Wolfram Sang <wsa+renesas@sang-engineering.com>,
        devicetree@vger.kernel.org, Johan Hovold <johan@kernel.org>,
        linux-kernel@vger.kernel.org
Subject: [PATCH v4 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant
Date:   Fri,  3 Nov 2023 23:55:57 +0100
Message-Id: <20231103225601.6499-1-wsa+renesas@sang-engineering.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Renesas KingFisher board includes a U-Blox Neo-M8 chip with its
reset pin wired to a GPIO. To support that, we need "reset-gpio" support
(patches 2+3). But first, simplify regulator handling with a new helper
(patch 1).

Changes since v3:
* rebased to 6.6
* improved commit messages for patches 2+3


Wolfram Sang (3):
  gnss: ubx: use new helper to remove open coded regulator handling
  dt-bindings: gnss: u-blox: add "reset-gpios" binding
  gnss: ubx: add support for the reset gpio

 .../bindings/gnss/u-blox,neo-6m.yaml          |  5 +++
 drivers/gnss/ubx.c                            | 35 ++++++++-----------
 2 files changed, 20 insertions(+), 20 deletions(-)

-- 
2.35.1