Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Bibo Mao <maobibo@loongson.cn>
To:     Tianrui Zhao <zhaotianrui@loongson.cn>,
        Huacai Chen <chenhuacai@kernel.org>
Cc:     WANG Xuerui <kernel@xen0n.name>, kvm@vger.kernel.org,
        loongarch@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/3] LoongArch: KVM: Remove kvm_acquire_timer before entering guest
Date:   Sat,  4 Nov 2023 16:57:55 +0800
Message-Id: <20231104085755.930439-4-maobibo@loongson.cn>
In-Reply-To: <20231104085755.930439-1-maobibo@loongson.cn>
References: <20231104085755.930439-1-maobibo@loongson.cn>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The vm timer emulation happens in two places, one is during vcpu thread
context switch, the other is idle instruction emulation and before
entering to guest. SW timer switching is remove during idle instruction
emulation, so it is not necessary to disable SW timer before entering to
guest.

This patch removes SW timer handling before entering guest mode, and put it
in HW restore flow when vcpu thread is sched-in. With this patch, vm
timer emulation is simpler, there is SW/HW timer switch only in vcpu
thread context switch scenario.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
---
 arch/loongarch/include/asm/kvm_vcpu.h |  1 -
 arch/loongarch/kvm/timer.c            | 21 +++++++------------
 arch/loongarch/kvm/vcpu.c             | 29 ---------------------------
 3 files changed, 7 insertions(+), 44 deletions(-)

diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h
index 553cfa2b2b1c..0e87652f780a 100644
--- a/arch/loongarch/include/asm/kvm_vcpu.h
+++ b/arch/loongarch/include/asm/kvm_vcpu.h
@@ -55,7 +55,6 @@ void kvm_save_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fcsr(struct loongarch_fpu *fpu);
 
-void kvm_acquire_timer(struct kvm_vcpu *vcpu);
 void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz);
 void kvm_reset_timer(struct kvm_vcpu *vcpu);
 void kvm_save_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c
index 1d29bd21a9da..45109fa0b299 100644
--- a/arch/loongarch/kvm/timer.c
+++ b/arch/loongarch/kvm/timer.c
@@ -64,19 +64,6 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz)
 	kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_TVAL, 0);
 }
 
-/*
- * Restore hard timer state and enable guest to access timer registers
- * without trap, should be called with irq disabled
- */
-void kvm_acquire_timer(struct kvm_vcpu *vcpu)
-{
-	/*
-	 * Freeze the soft-timer and sync the guest stable timer with it. We do
-	 * this with interrupts disabled to avoid latency.
-	 */
-	hrtimer_cancel(&vcpu->arch.swtimer);
-}
-
 /*
  * Restore soft timer state from saved context.
  */
@@ -115,12 +102,18 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
 		/*
 		 * Inject timer here though sw timer should inject timer
 		 * interrupt async already, since sw timer may be cancelled
-		 * during injecting intr async in function kvm_acquire_timer
+		 * during injecting intr async
 		 */
 		kvm_queue_irq(vcpu, INT_TI);
 	}
 
 	write_gcsr_timertick(delta);
+
+	/*
+	 * Freeze the soft-timer and sync the guest stable timer with it. We do
+	 * this with interrupts disabled to avoid latency.
+	 */
+	hrtimer_cancel(&vcpu->arch.swtimer);
 }
 
 /*
diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c
index 42663a345bd1..cf1c4d64c1b7 100644
--- a/arch/loongarch/kvm/vcpu.c
+++ b/arch/loongarch/kvm/vcpu.c
@@ -95,7 +95,6 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu)
 		 * check vmid before vcpu enter guest
 		 */
 		local_irq_disable();
-		kvm_acquire_timer(vcpu);
 		kvm_deliver_intr(vcpu);
 		kvm_deliver_exception(vcpu);
 		/* Make sure the vcpu mode has been written */
@@ -251,23 +250,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -EINVAL;
 }
 
-/**
- * kvm_migrate_count() - Migrate timer.
- * @vcpu:       Virtual CPU.
- *
- * Migrate hrtimer to the current CPU by cancelling and restarting it
- * if the hrtimer is active.
- *
- * Must be called when the vCPU is migrated to a different CPU, so that
- * the timer can interrupt the guest at the new CPU, and the timer irq can
- * be delivered to the vCPU.
- */
-static void kvm_migrate_count(struct kvm_vcpu *vcpu)
-{
-	if (hrtimer_cancel(&vcpu->arch.swtimer))
-		hrtimer_restart(&vcpu->arch.swtimer);
-}
-
 static int _kvm_getcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 *val)
 {
 	unsigned long gintc;
@@ -796,17 +778,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (vcpu->arch.last_sched_cpu != cpu) {
-		kvm_debug("[%d->%d]KVM vCPU[%d] switch\n",
-				vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id);
-		/*
-		 * Migrate the timer interrupt to the current CPU so that it
-		 * always interrupts the guest and synchronously triggers a
-		 * guest timer interrupt.
-		 */
-		kvm_migrate_count(vcpu);
-	}
-
 	/* Restore guest state to registers */
 	_kvm_vcpu_load(vcpu, cpu);
 	local_irq_restore(flags);
-- 
2.39.3