Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38;
From:   Justin Lai <justinlai0215@realtek.com>
To:     Simon Horman <horms@kernel.org>
CC:     "kuba@kernel.org" <kuba@kernel.org>,
        "davem@davemloft.net" <davem@davemloft.net>,
        "edumazet@google.com" <edumazet@google.com>,
        "pabeni@redhat.com" <pabeni@redhat.com>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
        "andrew@lunn.ch" <andrew@lunn.ch>,
        Ping-Ke Shih <pkshih@realtek.com>,
        Larry Chiu <larry.chiu@realtek.com>
Subject: RE: [PATCH net-next v10 12/13] net:ethernet:realtek: Update the Makefile and Kconfig in the realtek folder
Thread-Topic: [PATCH net-next v10 12/13] net:ethernet:realtek: Update the
 Makefile and Kconfig in the realtek folder
Thread-Index: AQHaDaOXaCiSv08AfUSaFrlhkAXsGLBp+vsAgBEBJNA=
Date:   Wed, 15 Nov 2023 06:20:13 +0000
Message-ID: <462b9b3197e0459db71aaf9dcebfc642@realtek.com>
References: <20231102154505.940783-1-justinlai0215@realtek.com>
 <20231102154505.940783-13-justinlai0215@realtek.com>
 <20231104183904.GO891380@kernel.org>
In-Reply-To: <20231104183904.GO891380@kernel.org>
Accept-Language: zh-TW, en-US
Content-Language: zh-TW
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 8BIT
MIME-Version: 1.0
Precedence: bulk


> -----Original Message-----
> From: Simon Horman <horms@kernel.org>
> Sent: Sunday, November 5, 2023 2:39 AM
> To: Justin Lai <justinlai0215@realtek.com>
> Cc: kuba@kernel.org; davem@davemloft.net; edumazet@google.com;
> pabeni@redhat.com; linux-kernel@vger.kernel.org; netdev@vger.kernel.org;
> andrew@lunn.ch; Ping-Ke Shih <pkshih@realtek.com>; Larry Chiu
> <larry.chiu@realtek.com>
> Subject: Re: [PATCH net-next v10 12/13] net:ethernet:realtek: Update the
> Makefile and Kconfig in the realtek folder
> 
> 
> External mail.
> 
> 
> 
> On Thu, Nov 02, 2023 at 11:45:04PM +0800, Justin Lai wrote:
> > 1. Add the RTASE entry in the Kconfig.
> > 2. Add the CONFIG_RTASE entry in the Makefile.
> >
> > Signed-off-by: Justin Lai <justinlai0215@realtek.com>
> > ---
> >  drivers/net/ethernet/realtek/Kconfig  | 17 +++++++++++++++++
> > drivers/net/ethernet/realtek/Makefile |  1 +
> >  2 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/realtek/Kconfig
> > b/drivers/net/ethernet/realtek/Kconfig
> > index 93d9df55b361..57ef924deebd 100644
> > --- a/drivers/net/ethernet/realtek/Kconfig
> > +++ b/drivers/net/ethernet/realtek/Kconfig
> > @@ -113,4 +113,21 @@ config R8169
> >         To compile this driver as a module, choose M here: the module
> >         will be called r8169.  This is recommended.
> >
> > +config RTASE
> > +     tristate "Realtek Automotive Switch
> 9054/9068/9072/9075/9068/9071 PCIe Interface support"
> > +     depends on PCI
> > +     select CRC32
> > +     help
> > +       Say Y here if you have a Realtek Ethernet adapter belonging to
> > +       the following families:
> > +       RTL9054 5GBit Ethernet
> > +       RTL9068 5GBit Ethernet
> > +       RTL9072 5GBit Ethernet
> > +       RTL9075 5GBit Ethernet
> > +       RTL9068 5GBit Ethernet
> > +       RTL9071 5GBit Ethernet
> > +
> > +       To compile this driver as a module, choose M here: the module
> > +       will be called rtase. This is recommended.
> > +
> >  endif # NET_VENDOR_REALTEK
> > diff --git a/drivers/net/ethernet/realtek/Makefile
> > b/drivers/net/ethernet/realtek/Makefile
> > index 2e1d78b106b0..0c1c16f63e9a 100644
> > --- a/drivers/net/ethernet/realtek/Makefile
> > +++ b/drivers/net/ethernet/realtek/Makefile
> > @@ -8,3 +8,4 @@ obj-$(CONFIG_8139TOO) += 8139too.o
> >  obj-$(CONFIG_ATP) += atp.o
> >  r8169-objs += r8169_main.o r8169_firmware.o r8169_phy_config.o
> >  obj-$(CONFIG_R8169) += r8169.o
> > +obj-$(CONFIG_RTASE) += rtase/
> 
> An allmodconfig on x86_64 fails to build with the series applied up to this
> point.
> 
> ../drivers/net/ethernet/realtek/rtase/rtase_main.c:68:10: fatal error:
> net/page_pool.h: No such file or directory    68 | #include
> <net/page_pool.h>
> 
> Please also note that, net-next closed, as per the following:
> 
> ## Form letter - net-next-closed
> 
> The merge window for v6.7 has begun and therefore net-next is closed for new
> drivers, features, code refactoring and optimizations.
> We are currently accepting bug fixes only.
> 
> Please repost when net-next reopens after November 12th.
> 
> RFC patches sent for review only are obviously welcome at any time.
> 
> See:
> https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#devel
> opment-cycle
> --
> pw-bot: cr

Thank you for your reply. I will correct the relevant compiler error and repost it after opening net-next.