Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id <S286150AbRLZEjN>; Tue, 25 Dec 2001 23:39:13 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org
	id <S286157AbRLZEjE>; Tue, 25 Dec 2001 23:39:04 -0500
Received: from [202.99.6.10] ([202.99.6.10]:28547 "EHLO mail.zhengmai.net.cn")
	by vger.kernel.org with ESMTP id <S286150AbRLZEi7>;
	Tue, 25 Dec 2001 23:38:59 -0500
Message-ID: <005401c18dc6$f3e3fb10$d20101c0@T21laser>
From: "Weiping He" <laser@zhengmai.com.cn>
To: <linux-kernel@vger.kernel.org>
Subject: anybody know about "journal-615" and/or "journal-601" log error?
Date: Wed, 26 Dec 2001 12:36:18 +0800
MIME-Version: 1.0
Content-Type: text/plain;
	charset="gb2312"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from base64 to 8bit by mangalore.zipworld.com.au id PAA24189

Hi,all
    Merry Christmas & Happy new year first!

    Then the problem:
    I'm using kernel 2.4.17 now:

---------------------------8<---------------------------------------------------------------------------
root@x200:/var/log# cat /proc/version
Linux version 2.4.17 (root@x200) (gcc version 2.95.3 20010315 (release)) #5 Tue Dec 25 14:45:38 CST 2001
---------------------------8<---------------------------------------------------------------------------

    but I've experienced server hang up of my box, the syslog entity is:
    (this show up after I re-compile the kernel with the reiserfs's:
        Have reiserfs do extra internal checking
        Stats in /proc/fs/reiserfs
     options set to enable)
---------------------------8<---------------------------------------------------------------------------
Dec 26 09:47:10 x200 kernel: journal-615: buffer write failed
---------------------------8<---------------------------------------------------------------------------

    or (before set the two options above to enable):
---------------------------8<---------------------------------------------------------------------------
Dec 18 10:19:13 x200 kernel: journal-601, buffer write failed
---------------------------8<---------------------------------------------------------------------------

    This box is a IBM Xseries X200, hardware config:
---------------------------8<---------------------------------------------------------------------------

root@x200:/var/log# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 8
model name      : Pentium III (Coppermine)
stepping        : 6
cpu MHz         : 866.676
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips        : 1723.59



root@x200:/var/log# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c4)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 8
        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 2.0
                Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: dc000000-ddffffff
        Prefetchable memory behind bridge: d0000000-d7ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
        Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. VT82C586 IDE [Apollo]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Region 4: I/O ports at d000 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
        Subsystem: Unknown device 0925:1234
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at d400 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
        Subsystem: Unknown device 0925:1234
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin ? routed to IRQ 5
        Capabilities: [68] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 [Apollo Super AC97/Audio] (rev 20)
        Subsystem: VIA Technologies, Inc.: Unknown device 4511
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 9
        Region 0: I/O ports at dc00 [size=256]
        Region 1: I/O ports at e000 [size=4]
        Region 2: I/O ports at e400 [size=4]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 SCSI storage controller: Adaptec 7892A (rev 02)
        Subsystem: Adaptec: Unknown device e220
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (10000ns min, 6250ns max), cache line size 08
        Interrupt: pin A routed to IRQ 11
        BIST result: 00
        Region 0: I/O ports at e800 [disabled] [size=256]
        Region 1: Memory at df101000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
        Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min, 14000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at df100000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at ec00 [size=64]
        Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at <unassigned> [disabled] [size=1M]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04) (prog-if 00 [VGA])
        Subsystem: Diamond Multimedia Systems: Unknown device 4906
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1000ns min, 63750ns max), cache line size 08
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=512K]
        Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] AGP version 2.0
                Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
---------------------------8<---------------------------------------------------------------------------

    the distribution is Slackware 8.0 and 
    we got 512M memory in this box and installing Oracle 8.1.7 on it to use as
    a experiment platform, all the filesystem are  reiserfs:

---------------------------8<---------------------------------------------------------------------------
root@x200:/var/log# mount
/dev/sdb3 on / type reiserfs (rw)
/dev/sdb6 on /tmp type reiserfs (rw)
/dev/sdb7 on /var type reiserfs (rw)
/dev/sdb8 on /opt type reiserfs (rw)
/dev/sdb9 on /usr type reiserfs (rw)
/dev/sdb10 on /home type reiserfs (rw)
/dev/sdc6 on /ext type reiserfs (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
none on /proc type proc (rw)
---------------------------8<---------------------------------------------------------------------------
I have three hard disk, they are IBM scsi disk (one 72k rpm, 2 10k rpm).

I've experienced power failure before the problem happens.
and after it happens, in `top' I can see that `kupdated' mark as <debunc>
my question is what's the matter here? I do some search in kernel archive
but found almost nothing relate that 'journal-615' or 'journal-601'.
Is it a bug or my sw/hw configure problem?
Any help would appreciate.


I've recompile the kernel using egcs 1.1.2 to see if it's different.


    Thanks & Regards    laser

    

?:.?˛???m???ka??b???zwm??b????˛???m?b??????z_???^n?r???z???h?????&???z??z?ޗ?+??+zf???h???~????i?????????z_???j:+v???)ߣ?m?S?y??杶?
???i??????????i