Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
From:   Johan Hovold <johan+linaro@kernel.org>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>,
        linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>, stable@vger.kernel.org,
        Heikki Krogerus <heikki.krogerus@linux.intel.com>
Subject: [PATCH 2/3] USB: dwc3: qcom: fix software node leak on probe errors
Date:   Fri, 17 Nov 2023 18:36:49 +0100
Message-ID: <20231117173650.21161-3-johan+linaro@kernel.org>
In-Reply-To: <20231117173650.21161-1-johan+linaro@kernel.org>
References: <20231117173650.21161-1-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Make sure to remove the software node also on (ACPI) probe errors to
avoid leaking the underlying resources.

Note that the software node is only used for ACPI probe so the driver
unbind tear down is updated to match probe.

Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node")
Cc: stable@vger.kernel.org      # 5.12
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 00c3021b43ce..0703f9b85cda 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -932,10 +932,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 interconnect_exit:
 	dwc3_qcom_interconnect_exit(qcom);
 depopulate:
-	if (np)
+	if (np) {
 		of_platform_depopulate(&pdev->dev);
-	else
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
 		platform_device_del(qcom->dwc3);
+	}
 	platform_device_put(qcom->dwc3);
 clk_disable:
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
@@ -955,11 +957,12 @@ static void dwc3_qcom_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	int i;
 
-	device_remove_software_node(&qcom->dwc3->dev);
-	if (np)
+	if (np) {
 		of_platform_depopulate(&pdev->dev);
-	else
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
 		platform_device_del(qcom->dwc3);
+	}
 	platform_device_put(qcom->dwc3);
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
-- 
2.41.0