Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Christian Marangi <ansuelsmth@gmail.com>
To:     "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Florian Fainelli <florian.fainelli@broadcom.com>,
        Broadcom internal kernel review list 
        <bcm-kernel-feedback-list@broadcom.com>,
        Daniel Golle <daniel@makrotopia.org>,
        Qingfang Deng <dqfext@gmail.com>,
        SkyLake Huang <SkyLake.Huang@mediatek.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        David Epping <david.epping@missinglinkelectronics.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        Christian Marangi <ansuelsmth@gmail.com>,
        "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
        Harini Katakam <harini.katakam@amd.com>,
        Simon Horman <horms@kernel.org>,
        Robert Marko <robert.marko@sartura.hr>, netdev@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-msm@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org
Subject: [net-next RFC PATCH 12/14] dt-bindings: net: Document Qcom QCA807x PHY package
Date:   Mon, 20 Nov 2023 14:50:39 +0100
Message-Id: <20231120135041.15259-13-ansuelsmth@gmail.com>
In-Reply-To: <20231120135041.15259-1-ansuelsmth@gmail.com>
References: <20231120135041.15259-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Document Qcom QCA807x PHY package.

Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
1000BASE-T PHY-s.

Document the required property to make the PHY package correctly
configure and work.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/qcom,qca807x.yaml | 143 ++++++++++++++++++
 1 file changed, 143 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml

diff --git a/Documentation/devicetree/bindings/net/qcom,qca807x.yaml b/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
new file mode 100644
index 000000000000..c2d59068d015
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA807X Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
+  IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
+  1000BASE-T PHY-s.
+
+  They feature 2 SerDes, one for PSGMII or QSGMII connection with
+  MAC, while second one is SGMII for connection to MAC or fiber.
+
+  Both models have a combo port that supports 1000BASE-X and
+  100BASE-FX fiber.
+
+  Each PHY inside of QCA807x series has 4 digitally controlled
+  output only pins that natively drive LED-s for up to 2 attached
+  LEDs. Some vendor also use these 4 output for GPIO usage without
+  attaching LEDs.
+
+  Note that output pins can be set to drive LEDs OR GPIO, mixed
+  definition are not accepted.
+
+allOf:
+  - $ref: ethernet-phy-package.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: ethernet-phy-package
+  patternProperties:
+    ^ethernet-phy(@[a-f0-9]+)?$:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ethernet-phy-id004d.d0b2
+              - ethernet-phy-id004d.d0b1
+  required:
+    - compatible
+
+properties:
+  global-phys:
+    maxItems: 2
+
+  global-phy-names:
+    items:
+      - const: combo
+      - const: pqsgmii
+
+  phy-connection-type:
+    enum:
+      - qsgmii
+      - psgmii
+
+patternProperties:
+  ^ethernet-phy(@[a-f0-9]+)?$:
+    $ref: /schemas/net/ethernet-phy.yaml#
+
+    properties:
+      gpio-controller:
+        description: set the output lines as GPIO instead of LEDs
+        type: boolean
+
+      '#gpio-cells':
+        description: number of GPIO cells for the PHY
+        const: 2
+
+    dependencies:
+      gpio-controller: ['#gpio-cells']
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy-package {
+            compatible = "ethernet-phy-package";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            global-phys = <&qca8075_4>, <&qca8075_psgmii>;
+            global-phy-names = "combo", "pqsgmii";
+
+            qca8075_1: ethernet-phy@1 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <1>;
+
+                leds {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_GREEN>;
+                        function = LED_FUNCTION_LAN;
+                        default-state = "keep";
+                    };
+                };
+            };
+
+            qca8075_2: ethernet-phy@2 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <2>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            qca8075_3: ethernet-phy@3 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <3>;
+            };
+
+            qca8075_4: ethernet-phy@4 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <4>;
+            };
+
+            qca8075_pqsgmii: ethernet-phy@5 {
+                reg = <5>;
+            };
+        };
+    };
-- 
2.40.1