Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38;
From:   Johan Hovold <johan+linaro@kernel.org>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        cros-qcom-dts-watchers@chromium.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>,
        Abel Vesa <abel.vesa@linaro.org>
Subject: [PATCH 11/11] arm64: dts: qcom: sm8550: fix USB wakeup interrupt types
Date:   Mon, 20 Nov 2023 17:43:31 +0100
Message-ID: <20231120164331.8116-12-johan+linaro@kernel.org>
In-Reply-To: <20231120164331.8116-1-johan+linaro@kernel.org>
References: <20231120164331.8116-1-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7b9ddde0b2c9..9b5b098bb7e8 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2923,8 +2923,8 @@ usb_1: usb@a6f8800 {
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
-- 
2.41.0