Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) client-ip=23.128.96.32;
Date:   Mon, 20 Nov 2023 11:26:26 -0600
From:   Andrew Halaney <ahalaney@redhat.com>
To:     Johan Hovold <johan+linaro@kernel.org>
Cc:     Bjorn Andersson <andersson@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        cros-qcom-dts-watchers@chromium.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Shazad Hussain <quic_shazhuss@quicinc.com>
Subject: Re: [PATCH 02/11] arm64: dts: qcom: sa8775p: fix USB wakeup
 interrupt types
Message-ID: <ow6hw44aqmi2gw4bnqa363jidmyoxhuzpasy4xg4c5a34brpmo@puehdmcibmfh>
References: <20231120164331.8116-1-johan+linaro@kernel.org>
 <20231120164331.8116-3-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20231120164331.8116-3-johan+linaro@kernel.org>
Precedence: bulk

On Mon, Nov 20, 2023 at 05:43:22PM +0100, Johan Hovold wrote:
> The DP/DM wakeup interrupts are edge triggered and which edge to trigger
> on depends on use-case and whether a Low speed or Full/High speed device
> is connected.
> 
> Note that only triggering on rising edges can be used to detect resume
> events but not disconnect events.
> 
> Fixes: de1001525c1a ("arm64: dts: qcom: sa8775p: add USB nodes")
> Cc: Shazad Hussain <quic_shazhuss@quicinc.com>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>

> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index b6a93b11cbbd..4b42a329460c 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -1610,8 +1610,8 @@ usb_0: usb@a6f8800 {
>  			assigned-clock-rates = <19200000>, <200000000>;
>  
>  			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
> -					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
> -					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
> +					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
>  					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "pwr_event",
>  					  "dp_hs_phy_irq",
> @@ -1697,8 +1697,8 @@ usb_1: usb@a8f8800 {
>  			assigned-clock-rates = <19200000>, <200000000>;
>  
>  			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
> -					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
> -					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
> +					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
>  					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "pwr_event",
>  					  "dp_hs_phy_irq",
> @@ -1760,8 +1760,8 @@ usb_2: usb@a4f8800 {
>  			assigned-clock-rates = <19200000>, <200000000>;
>  
>  			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
> -					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
> -					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
> +					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
>  			interrupt-names = "pwr_event",
>  					  "dp_hs_phy_irq",
>  					  "dm_hs_phy_irq";
> -- 
> 2.41.0
> 
>