Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
Message-ID: <209d6082-35b6-4403-9dc4-a02c0da4fb94@quicinc.com>
Date:   Tue, 21 Nov 2023 08:38:25 +0800
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH 06/16] arm64: dts: qcom: sm8550-aim300: add SM8550 AIM300
To:     Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
        <tglx@linutronix.de>
CC:     <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <-cc=kernel@quicinc.com>
References: <20231117101817.4401-1-quic_tengfan@quicinc.com>
 <20231117101817.4401-7-quic_tengfan@quicinc.com>
 <aecb04cd-805d-4c2d-b6a7-67a47b963ee9@linaro.org>
From:   Tengfei Fan <quic_tengfan@quicinc.com>
In-Reply-To: <aecb04cd-805d-4c2d-b6a7-67a47b963ee9@linaro.org>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk


在 11/17/2023 6:28 PM, Dmitry Baryshkov 写道:
> On 17/11/2023 12:18, Tengfei Fan wrote:
>> Add a minimal DTS for the new QRD8550 board, serial, UFS and USB should
>> be working.
> 
> An explanation of what is AIM300 would be welcomed.
> 
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile          |   1 +
>>   arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 490 +++++++++++++++++++++
>>   2 files changed, 491 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile 
>> b/arch/arm64/boot/dts/qcom/Makefile
>> index d6cb840b7050..ea5d4a07671a 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -229,5 +229,6 @@ dtb-$(CONFIG_ARCH_QCOM)    += sm8450-hdk.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += sm8450-qrd.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += sm8450-sony-xperia-nagara-pdx223.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += sm8450-sony-xperia-nagara-pdx224.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += sm8550-aim300.dtb
> 
> My email client suggests that alignment is broken here.
I checked the code after apply this patch, and find this code alignment 
have not issue, so I will check if have some format issue when I do this 
patch.
> 
>>   dtb-$(CONFIG_ARCH_QCOM)    += sm8550-mtp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += sm8550-qrd.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts 
>> b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>> new file mode 100644
>> index 000000000000..202b979da8ca
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>> @@ -0,0 +1,490 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights 
>> reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "sm8550.dtsi"
>> +#include "pm8010.dtsi"
>> +#include "pm8550.dtsi"
>> +#include "pm8550b.dtsi"
>> +#include "pm8550ve.dtsi"
>> +#include "pm8550vs.dtsi"
>> +#include "pmk8550.dtsi"
>> +#include "pmr735d_a.dtsi"
>> +#include "pmr735d_b.dtsi"
>> +
>> +/ {
>> +    model = "Qualcomm Technologies, Inc. SM8550 AIM300";
>> +    compatible = "qcom,sm8550-aim300", "qcom,sm8550";
>> +
>> +    aliases {
>> +        serial0 = &uart7;
>> +    };
>> +
>> +    chosen {
>> +        stdout-path = "serial0:115200n8";
>> +    };
>> +
>> +    pmic-glink {
>> +        compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +        orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
>> +
>> +        connector@0 {
>> +            compatible = "usb-c-connector";
>> +            reg = <0>;
>> +            power-role = "dual";
>> +            data-role = "dual";
>> +
>> +            ports {
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +
>> +                port@0 {
>> +                    reg = <0>;
>> +
>> +                    pmic_glink_hs_in: endpoint {
>> +                        remote-endpoint = <&usb_1_dwc3_hs>;
>> +                    };
>> +                };
>> +
>> +                port@1 {
>> +                    reg = <1>;
>> +
>> +                    pmic_glink_ss_in: endpoint {
>> +                        remote-endpoint = <&usb_1_dwc3_ss>;
>> +                    };
>> +                };
>> +            };
>> +        };
>> +    };
>> +
>> +    vph_pwr: vph-pwr-regulator {
> 
> It's not demanded, I think, but I'd suggest 'regulator-vph-pwr' to allow 
> all regulators to be grouped together.
Thanks this comments, I will sync your comments with internal team, then 
I will update sync result to you.
> 
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "vph_pwr";
>> +        regulator-min-microvolt = <3700000>;
>> +        regulator-max-microvolt = <3700000>;
>> +
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +    };
>> +};
> 
> Other than that looks good to me.
> 

-- 
Thx and BRs,
Tengfei Fan