Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3;
MIME-Version: 1.0
References: <20231117163900.766996-1-daniel.baluta@oss.nxp.com>
 <874jhh2g8s.wl-kuninori.morimoto.gx@renesas.com> <CAEnQRZBb0ZJk7aTaji-xH2jEs7QiTaoXTuS5_K-ruSaxpEnWdw@mail.gmail.com>
 <TYCPR01MB109142FEC8F77CFFE3930456CD4B4A@TYCPR01MB10914.jpnprd01.prod.outlook.com>
 <CAEnQRZD8zbgRzBrx+iHTbDqG5tOedNLyJByNNtSHTRtxFsgyGw@mail.gmail.com> <878r6qh2y1.wl-kuninori.morimoto.gx@renesas.com>
In-Reply-To: <878r6qh2y1.wl-kuninori.morimoto.gx@renesas.com>
From:   Daniel Baluta <daniel.baluta@gmail.com>
Date:   Wed, 22 Nov 2023 12:16:34 +0200
Message-ID: <CAEnQRZAVM6=2udYg0jY8dD_uVE8yGQgsoZ14K1MBiCP+dCqLNQ@mail.gmail.com>
Subject: Re: [RFC PATCH] ASoC: simple-card: Use dai_id from node description
To:     Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc:     Daniel Baluta <daniel.baluta@oss.nxp.com>,
        "broonie@kernel.org" <broonie@kernel.org>,
        "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "iuliana.prodan@nxp.com" <iuliana.prodan@nxp.com>,
        "shengjiu.wang@nxp.com" <shengjiu.wang@nxp.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Wed, Nov 22, 2023 at 5:39=E2=80=AFAM Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
>
>
> Hi Daniel
>
> > > But hmm... in your case, you need to setup 2ports, and use 2nd port
> > > is assumed approach.
> > > Why you don't setup full port ? Do you have some reason ??
> (snip)
> > Now, I want to write a DTS description where my DAI link uses
> > Component 0 (CPU) (with its DAI index 1) connected with Component 1
> > (codec) (with its DAI index 0).
>
> Thank you for indicating your DTS.
>
> So in imx8m_dai case, it has total 3 DAIs, and you want to use reg =3D 1.
> In such case, your DTS need to have like below, if my understanding was
> correct.
>
>         dsp: dsp@3b6e8000 {
>                 ports {
>                              port@0 { reg =3D <0>;         endpoint { /* =
not used */ };  };
>                         cpu: port@1 { reg =3D <1>; cpu_ep: endpoint { rem=
ote-endpoint =3D <xxx>; }; };
>                              port@2 { reg =3D <2>;         endpoint { /* =
not used */ };  };
>                 };
>         };
>

This works! Thanks. I didn't know that you can leave an endpoint unused :).

So please ignore my initial patch then.