Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754508AbXK1R7U (ORCPT ); Wed, 28 Nov 2007 12:59:20 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750917AbXK1R7N (ORCPT ); Wed, 28 Nov 2007 12:59:13 -0500 Received: from smtp2.it.da.ut.ee ([193.40.5.67]:38834 "EHLO smtp2.it.da.ut.ee" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750850AbXK1R7L (ORCPT ); Wed, 28 Nov 2007 12:59:11 -0500 Date: Wed, 28 Nov 2007 19:59:07 +0200 (EET) From: Meelis Roos To: Linux Kernel list Subject: ata4294967295: failed to start port (errno=-19) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13659 Lines: 303 Got the message about ata4294967295 - looks like an uninitialzed variable or negative wrapraound. This is PIIX4 class ide on 440BX based laptop (Thinkpad X20). Everything seems to work fine though, there is only one PATA HDD attached and it works fine. This message comes from 2.6.24-rc3 + todays git, version a531a141089714efe39eca89593524fdf05104f2. I did grep the logs and found that it first appeared in 2.6.24-rc1 (+ some git mayve) on Nov 3. I used 2.6.23 before that and it did not show this message. Full dmesg: Linux version 2.6.24-rc3 (mroos@tulp) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 Wed Nov 28 10:24:37 EET 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dd000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable) BIOS-e820: 0000000013ff0000 - 0000000013ffec00 (ACPI data) BIOS-e820: 0000000013ffec00 - 0000000014000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 319MB LOWMEM available. Entering add_active_range(0, 0, 81904) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 81904 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 81904 On node 0 totalpages: 81904 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 607 pages used for memmap Normal zone: 77201 pages, LIFO batch:15 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F6EC0, 0014 (r0 PTLTD ) ACPI: RSDT 13FF5C49, 002C (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 13FFEB65, 0074 (r1 IBM TP-X21 6040000 0) ACPI: DSDT 13FF5C75, 8EF0 (r1 IBM TP-X21 6040000 MSFT 100000C) ACPI: FACS 13FFF000, 0040 ACPI: BOOT 13FFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 14000000:ebf80000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dd000 swsusp: Registered nosave memory region: 00000000000dd000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81265 Kernel command line: root=/dev/sda1 ro resume=/dev/sda2 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01283000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0385000 soft=c0384000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 597.424 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 316420k/327616k available (1746k kernel code, 10624k reserved, 629k data, 180k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) vmalloc : 0xd4800000 - 0xfffb3000 ( 695 MB) lowmem : 0xc0000000 - 0xd3ff0000 ( 319 MB) .init : 0xc0354000 - 0xc0381000 ( 180 kB) .data : 0xc02b4b18 - 0xc0352244 ( 629 kB) .text : 0xc0100000 - 0xc02b4b18 (1746 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 1195.55 BogoMIPS (lpj=5977766) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. CPU: Intel Pentium III (Coppermine) stepping 03 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0e20) net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-103f claimed by PIIX4 ACPI PCI quirk: region 1040-104f claimed by PIIX4 SMB PIIX4 devres I PIO at 03f0-03f7 PIIX4 devres J PIO at 002e-002f ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 9 11) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs *9 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 9 11) *5 ACPI: Power Resource [PSIO] (on) ACPI: Power Resource [PSER] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff could not be reserved system 00:02: ioport range 0x1000-0x103f has been reserved system 00:02: ioport range 0x1040-0x104f has been reserved system 00:02: ioport range 0xfe00-0xfe0f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: f4100000-f5ffffff PREFETCH window: disabled. PCI: Bus 2, cardbus bridge: 0000:00:08.0 IO window: 00001400-000014ff IO window: 00001c00-00001cff PREFETCH window: 20000000-23ffffff MEM window: 24000000-27ffffff PCI: Bus 6, cardbus bridge: 0000:00:08.1 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 28000000-2bffffff MEM window: 2c000000-2fffffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered Unpacking initramfs...<7>Switched to high resolution mode on CPU 0 done Freeing initrd memory: 4775k freed Simple Boot Flag at 0x35 set to 0x1 Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Boot video device is 0000:01:00.0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial 00:0b: activated 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 console [netcon0] enabled netconsole: network logging started PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 180k freed Write protecting the kernel text: 1748k Write protecting the kernel read-only data: 466k input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) Marking TSC unstable due to: TSC halts in idle. ACPI: Thermal Zone [THM0] (52 C) Time: acpi_pm clocksource has been installed. SCSI subsystem initialized e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 e100: eth0: e100_probe: addr 0xf4010000, irq 9, MAC addr 00:90:27:96:b1:d0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected libata version 3.00 loaded. ata4294967295: failed to start port (errno=-19) ata_piix 0000:00:07.1: version 2.12 Floppy drive(s): fd0 is 1.44M scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 ata1.00: ATA-5: IC25N020ATCS04-0, CA2OA71A, max UDMA/100 ata1.00: 39070080 sectors, multi 16: LBA ata1.00: configured for UDMA/33 Clocksource tsc unstable (delta = -235750971 ns) scsi 0:0:0:0: Direct-Access ATA IC25N020ATCS04-0 CA2O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk floppy0: no floppy controllers found Attempting manual resume swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Yenta: CardBus bridge found at 0000:00:08.0 [1014:0185] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:08.1 [1014:0185] Floppy drive(s): fd0 is 1.44M Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input2 parport_pc 00:0c: activated parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] input: Video Bus as /class/input/input6 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) floppy0: no floppy controllers found ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 gameport: CS4281 Gameport is pci0000:00:0b.0/gameport0, speed 2294kHz EXT3 FS on sda1, internal journal Non-volatile memory driver v1.2 thinkpad_acpi: ThinkPad ACPI Extras v0.17 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS IZET9BWW (2.23 ), EC unknown thinkpad_acpi: acpi_bus_get_device(bay) failed: -19 thinkpad_acpi: disabling subdriver bay input: ThinkPad Extra Buttons as /class/input/input7 NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready input: /usr/sbin/thinkpad-keys as /class/input/input8 eth0: no IPv6 routers present Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 -- Meelis Roos (mroos@linux.ee) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/