Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Claudiu <claudiu.beznea@tuxon.dev>
To:     s.shtylyov@omp.ru, davem@davemloft.net, edumazet@google.com,
        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linux@armlinux.org.uk, geert+renesas@glider.be,
        magnus.damm@gmail.com, mturquette@baylibre.com, sboyd@kernel.org,
        linus.walleij@linaro.org, p.zabel@pengutronix.de, arnd@arndb.de,
        m.szyprowski@samsung.com, alexandre.torgue@foss.st.com, afd@ti.com,
        broonie@kernel.org, alexander.stein@ew.tq-group.com,
        eugen.hristev@collabora.com, sergei.shtylyov@gmail.com,
        prabhakar.mahadev-lad.rj@bp.renesas.com, biju.das.jz@bp.renesas.com
Cc:     linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
        linux-gpio@vger.kernel.org, claudiu.beznea@tuxon.dev,
        Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: [PATCH 11/14] arm64: renesas: rzg3s-smarc-som: Invert the logic for SW_SD2_EN macro
Date:   Mon, 20 Nov 2023 09:00:21 +0200
Message-Id: <20231120070024.4079344-12-claudiu.beznea.uj@bp.renesas.com>
In-Reply-To: <20231120070024.4079344-1-claudiu.beznea.uj@bp.renesas.com>
References: <20231120070024.4079344-1-claudiu.beznea.uj@bp.renesas.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The intention of SW_SD2_EN macro was to reflect the state of SW_CONFIG3
switch available on RZ/G3S Smarc Module. According to documentation SD2
is enabled when switch is in OFF state. For this, changed the logic of
marco to map value 0 to switch's OFF state and value 1 to switch's ON
state. Along with this update the description for each state for better
understanding.

The value of SW_SD2_EN macro was not changed in file because, according to
documentation, the default state for this switch is ON.

Fixes: adb4f0c5699c ("arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 01a4a9da7afc..275b14acd2ee 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -14,8 +14,8 @@
  *	0 - SD0 is connected to eMMC
  *	1 - SD0 is connected to uSD0 card
  * @SW_SD2_EN:
- *	0 - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
- *	1 - SD2 is connected to SoC
+ *	0 - (switch OFF) SD2 is connected to SoC
+ *	1 - (switch ON)  SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
  */
 #define SW_SD0_DEV_SEL	1
 #define SW_SD2_EN	1
@@ -25,7 +25,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhi0;
-#if SW_SD2_EN
+#if !SW_SD2_EN
 		mmc2 = &sdhi2;
 #endif
 	};
@@ -116,7 +116,7 @@ &sdhi0 {
 };
 #endif
 
-#if SW_SD2_EN
+#if !SW_SD2_EN
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
 	pinctrl-names = "default";
-- 
2.39.2