Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) client-ip=2620:137:e000::3:8;
MIME-Version: 1.0
References: <20231120070024.4079344-1-claudiu.beznea.uj@bp.renesas.com> <20231120070024.4079344-3-claudiu.beznea.uj@bp.renesas.com>
In-Reply-To: <20231120070024.4079344-3-claudiu.beznea.uj@bp.renesas.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Thu, 23 Nov 2023 16:53:17 +0100
Message-ID: <CAMuHMdXTO+cteN7fW+n3=Vzpa5Nk7oxj+sF2vBMLf2gwS=aNGw@mail.gmail.com>
Subject: Re: [PATCH 02/14] clk: renesas: rzg2l-cpg: Check reset monitor registers
To:     Claudiu <claudiu.beznea@tuxon.dev>
Cc:     s.shtylyov@omp.ru, davem@davemloft.net, edumazet@google.com,
        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linux@armlinux.org.uk, geert+renesas@glider.be,
        magnus.damm@gmail.com, mturquette@baylibre.com, sboyd@kernel.org,
        linus.walleij@linaro.org, p.zabel@pengutronix.de, arnd@arndb.de,
        m.szyprowski@samsung.com, alexandre.torgue@foss.st.com, afd@ti.com,
        broonie@kernel.org, alexander.stein@ew.tq-group.com,
        eugen.hristev@collabora.com, sergei.shtylyov@gmail.com,
        prabhakar.mahadev-lad.rj@bp.renesas.com,
        biju.das.jz@bp.renesas.com, linux-renesas-soc@vger.kernel.org,
        netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
        Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Hi Claudiu,

On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Hardware manual of both RZ/G2L and RZ/G3S specifies that reset monitor
> registers need to be interrogated when the reset signals are toggled
> (chapters "Procedures for Supplying and Stopping Reset Signals" and
> "Procedure for Activating Modules"). Without this there is a chance that
> different modules (e.g. Ethernet) to not be ready after reset signal is
> toggled leading to failures (on probe or resume from deep sleep states).
>
> Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> In case you apply this patch and patch 1/13 as is, please add a Depend-on
> tag on this patch to point to patch 1/13 for proper backporting.

There is no such Depend-on tag? Anyway, this patch won't apply if 1/13
is not backported...

> --- a/drivers/clk/renesas/rzg2l-cpg.c
> +++ b/drivers/clk/renesas/rzg2l-cpg.c
> @@ -1416,12 +1416,23 @@ static int rzg2l_cpg_assert(struct reset_controller_dev *rcdev,
>         struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev);
>         const struct rzg2l_cpg_info *info = priv->info;
>         unsigned int reg = info->resets[id].off;
> -       u32 value = BIT(info->resets[id].bit) << 16;
> +       u32 dis = BIT(info->resets[id].bit);
> +       u32 value = dis << 16;
> +       int ret = 0;
>
>         dev_dbg(rcdev->dev, "assert id:%ld offset:0x%x\n", id, CLK_RST_R(reg));
>
>         writel(value, priv->base + CLK_RST_R(reg));
> -       return 0;
> +
> +       if (info->has_clk_mon_regs) {
> +               ret = readl_poll_timeout_atomic(priv->base + CLK_MRST_R(reg), value,
> +                                               value & dis, 10, 200);
> +       } else {
> +               /* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */
> +               udelay(35);
> +       }

I think this should also take into account CPG_RST_MON on RZ/V2M,
cfr. rzg2l_cpg_status().

> +
> +       return ret;
>  }
>
>  static int rzg2l_cpg_deassert(struct reset_controller_dev *rcdev,
> @@ -1432,12 +1443,22 @@ static int rzg2l_cpg_deassert(struct reset_controller_dev *rcdev,
>         unsigned int reg = info->resets[id].off;
>         u32 dis = BIT(info->resets[id].bit);
>         u32 value = (dis << 16) | dis;
> +       int ret = 0;
>
>         dev_dbg(rcdev->dev, "deassert id:%ld offset:0x%x\n", id,
>                 CLK_RST_R(reg));
>
>         writel(value, priv->base + CLK_RST_R(reg));
> -       return 0;
> +
> +       if (info->has_clk_mon_regs) {
> +               ret = readl_poll_timeout_atomic(priv->base + CLK_MRST_R(reg), value,
> +                                               !(value & dis), 10, 200);
> +       } else {
> +               /* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */
> +               udelay(35);
> +       }

Likewise.

> +
> +       return ret;
>  }
>
>  static int rzg2l_cpg_reset(struct reset_controller_dev *rcdev,

The rest LGTM.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds