Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.33 as permitted sender) client-ip=23.128.96.33;
Date:   Thu, 23 Nov 2023 22:12:22 +0000
To:     Benjamin Tissoires <benjamin.tissoires@redhat.com>
From:   David Revoy <davidrevoy@protonmail.com>
Cc:     =?utf-8?Q?Jos=C3=A9_Exp=C3=B3sito?= <jose.exposito89@gmail.com>,
        Eric GOUYER <folays@gmail.com>,
        Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de>,
        jkosina@suse.cz, jason.gerecke@wacom.com,
        linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Requesting your attention and expertise regarding a Tablet/Kernel issue
Message-ID: <evHI05gyKuWwynY1WdyVvXqKPUaPE8W34cc3tFfp9FWh94TWfA9FWfHun7AAscF9lqfbiYsLKGC7kTSZ9xWNZg88-PTpbGTLcFMc9D3P2HE=@protonmail.com>
In-Reply-To: <CAO-hwJJoCp0_kxf_HHN9n9EWy9YDSY4rP8ysYNrNg2xTUYtKEQ@mail.gmail.com>
References: <nycvar.YFH.7.76.2311012033290.29220@cbobk.fhfr.pm> <_DEF7tHL1p_ExY7GJlJvT5gRA7ZvNnVMJuURb8_WCV-0fbYXkLN2p5zHloi6wiJPNzGEjFAkq2sjbCU633_eNF_cGm0rAbmCOOIOfwe1jWo=@protonmail.com> <CAO-hwJ+zm=R7NwrALaLVmfPDtMNXpj0eoQgLkiS1wa6wd+hu+A@mail.gmail.com> <CAO-hwJKJW5jGDdaaS8eB7kcLQUvWO_1XkOzJG4HAcaRzw1cGnQ@mail.gmail.com> <7wmtNlKuYResf5cFQ7M2QTalzIUtw0I6ohvPcz69Jo1c8flezyIlnJu1IwAgXhJ-u0NlRL3IV7HnL0Kza6fVBqd7X7jhc-Z6QCi3oqHEvpY=@protonmail.com> <CAO-hwJJ+nx72_TPfxcWRPBDZdDaPrO5yMNH4Y_mj6ej651Mesw@mail.gmail.com> <nFHw6XePiH5p60JsbQSbssRkiuABiTiR_n5fIYFZjPgkV3ObjjZuwTC84BJ_1vXYVufPbG3UvZ1L7ODSrrGlq9CrI7BTKhsV5QeAQoakV18=@protonmail.com> <CAO-hwJ+jwmTE-v7FsPi3f70mB8SqUha7Ek9DtptZ0auiFpGM7w@mail.gmail.com> <CAO-hwJJoCp0_kxf_HHN9n9EWy9YDSY4rP8ysYNrNg2xTUYtKEQ@mail.gmail.com>
Feedback-ID: 5460171:user:proton
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Hi Benjamin,

Sorry for late reply.

> So it would be nice if you could try the artifacts of job 51600738[4].
> Again, download them (udev-hid-bpf_0.1.0-4-g5ab02ec.tar.xz), unpack,
> sudo ./install --verbose, then unplug/replug the artist Pro 24.

Ok, the main change I experienced after installing is xsetwacom=20
listing the ID name of the device with twice the name Stylus on=20
"UGTABLET 24 inch PenDisplay Stylus stylus". Before it was only=20
"UGTABLET 24 inch PenDisplay stylus".

$ xsetwacom --list
UGTABLET 24 inch PenDisplay Stylus stylus       id: 10  type: STYLUS=20

Not a big deal, but I thought it was worth to mention it.

> Then, I'll need the following sequence (ideally repeated twice or
> three times, given that your last record show a slight difference in
> the first and second attempt):
>=20
> - outside of the proximity of the sensor, press the upper button
> - approach the stylus to the surface keeping the upper button pressed
> - touch the surface with the tip while holding the upper button pressed
> - release the upper button while keeping the tip pressed (like previously=
)
> - press once again the upper button while keeping the tip touching the
> surface (like previously)
> - lift of the pen, keeping the upper button pressed, and still in
> range of the sensor
> - remove the pen from the proximity of the sensor entirely (move away
> 20 cm or so), while still keeping the upper button pressed
>=20
> It's actually longer to describe than to execute :)
>=20

Thank you for the detailed steps. True, it makes sens once=20
practising it. I made the gesture three time on:=20

https://www.peppercarrot.com/extras/mailing-list/hid-records/XPPEN-Artist-2=
4-Pro/2023-11-23_XPPEN-Artist-24-Pro_pen_tip-contact-and-press-release-uppe=
r-stylus-button-while-pressed-x3.txt

> But I would also totally understand that you had enough debugging and
> you would rather focus on using the tablets, instead of debugging
> them. In which case, someone else from the community might help me.

No problem for continue testing, I'm around! Thank you again=20
for improving the behavior of the tablets.

Cheers,
David