Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.33 as permitted sender) client-ip=23.128.96.33;
From:   Yi Liu <yi.l.liu@intel.com>
To:     joro@8bytes.org, alex.williamson@redhat.com, jgg@nvidia.com,
        kevin.tian@intel.com, robin.murphy@arm.com,
        baolu.lu@linux.intel.com
Cc:     cohuck@redhat.com, eric.auger@redhat.com, nicolinc@nvidia.com,
        kvm@vger.kernel.org, mjrosato@linux.ibm.com,
        chao.p.peng@linux.intel.com, yi.l.liu@intel.com,
        yi.y.sun@linux.intel.com, peterx@redhat.com, jasowang@redhat.com,
        shameerali.kolothum.thodi@huawei.com, lulu@redhat.com,
        suravee.suthikulpanit@amd.com, iommu@lists.linux.dev,
        linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org,
        zhenzhong.duan@intel.com, joao.m.martins@oracle.com,
        xin.zeng@intel.com, yan.y.zhao@intel.com
Subject: [PATCH 0/8] iommufd support pasid attach/replace
Date:   Sun, 26 Nov 2023 22:34:20 -0800
Message-Id: <20231127063428.127436-1-yi.l.liu@intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

PASID (Process Address Space ID) is a PCIe extension to tag the DMA
transactions out of a physical device, and most modern IOMMU hardware
have supported PASID granular address translation. So a PASID-capable
device can be attached to multiple hwpts (a.k.a. domains), each attachment
is tagged with a pasid.

This series first adds a missing iommu API to replace domain for a pasid,
then adds iommufd APIs for device drivers to attach/replace/detach pasid
to/from hwpt per userspace's request, and adds selftest to validate the
iommufd APIs.

pasid attach/replace is mandatory on Intel VT-d given the PASID table
locates in the physical address space hence must be managed by the kernel,
both for supporting vSVA and coming SIOV. But it's optional on ARM/AMD
which allow configuring the PASID/CD table either in host physical address
space or nested on top of an GPA address space. This series only add VT-d
support as the minimal requirement.

Complete code can be found in below link:

https://github.com/yiliu1765/iommufd/tree/iommufd_pasid

Change log:

v1:
 - Implemnet iommu_replace_device_pasid() to fall back to the original domain
   if this replacement failed (Kevin)
 - Add check in do_attach() to check corressponding attach_fn per the pasid value.

rfc: https://lore.kernel.org/linux-iommu/20230926092651.17041-1-yi.l.liu@intel.com/

Regards,
	Yi Liu

Kevin Tian (1):
  iommufd: Support attach/replace hwpt per pasid

Lu Baolu (2):
  iommu: Introduce a replace API for device pasid
  iommu/vt-d: Add set_dev_pasid callback for nested domain

Yi Liu (5):
  iommufd: replace attach_fn with a structure
  iommufd/selftest: Add set_dev_pasid and remove_dev_pasid in mock iommu
  iommufd/selftest: Add a helper to get test device
  iommufd/selftest: Add test ops to test pasid attach/detach
  iommufd/selftest: Add coverage for iommufd pasid attach/detach

 drivers/iommu/intel/nested.c                  |  47 +++++
 drivers/iommu/iommu-priv.h                    |   2 +
 drivers/iommu/iommu.c                         |  82 ++++++--
 drivers/iommu/iommufd/Makefile                |   1 +
 drivers/iommu/iommufd/device.c                |  50 +++--
 drivers/iommu/iommufd/iommufd_private.h       |  23 +++
 drivers/iommu/iommufd/iommufd_test.h          |  24 +++
 drivers/iommu/iommufd/pasid.c                 | 138 ++++++++++++++
 drivers/iommu/iommufd/selftest.c              | 176 ++++++++++++++++--
 include/linux/iommufd.h                       |   6 +
 tools/testing/selftests/iommu/iommufd.c       | 172 +++++++++++++++++
 .../selftests/iommu/iommufd_fail_nth.c        |  28 ++-
 tools/testing/selftests/iommu/iommufd_utils.h |  78 ++++++++
 13 files changed, 785 insertions(+), 42 deletions(-)
 create mode 100644 drivers/iommu/iommufd/pasid.c

-- 
2.34.1