Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
Message-ID: <eda3c1a8-b241-4016-9878-6e4c88b56b50@linaro.org>
Date:   Mon, 27 Nov 2023 09:12:40 +0100
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
From:   Neil Armstrong <neil.armstrong@linaro.org>
Reply-To: neil.armstrong@linaro.org
Subject: Re: [PATCH] arm64: dts: meson: radxa-zero2: add pwm-fan support
Content-Language: en-US, fr
To:     Christian Hewitt <christianshewitt@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Kevin Hilman <khilman@baylibre.com>,
        Jerome Brunet <jbrunet@baylibre.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Yuntian Zhang <yt@radxa.com>
References: <20231028075445.3515664-1-christianshewitt@gmail.com>
Autocrypt: addr=neil.armstrong@linaro.org; keydata=
 xsBNBE1ZBs8BCAD78xVLsXPwV/2qQx2FaO/7mhWL0Qodw8UcQJnkrWmgTFRobtTWxuRx8WWP
 GTjuhvbleoQ5Cxjr+v+1ARGCH46MxFP5DwauzPekwJUD5QKZlaw/bURTLmS2id5wWi3lqVH4
 BVF2WzvGyyeV1o4RTCYDnZ9VLLylJ9bneEaIs/7cjCEbipGGFlfIML3sfqnIvMAxIMZrvcl9
 qPV2k+KQ7q+aXavU5W+yLNn7QtXUB530Zlk/d2ETgzQ5FLYYnUDAaRl+8JUTjc0CNOTpCeik
 80TZcE6f8M76Xa6yU8VcNko94Ck7iB4vj70q76P/J7kt98hklrr85/3NU3oti3nrIHmHABEB
 AAHNKk5laWwgQXJtc3Ryb25nIDxuZWlsLmFybXN0cm9uZ0BsaW5hcm8ub3JnPsLAkQQTAQoA
 OwIbIwULCQgHAwUVCgkICwUWAgMBAAIeAQIXgBYhBInsPQWERiF0UPIoSBaat7Gkz/iuBQJk
 Q5wSAhkBAAoJEBaat7Gkz/iuyhMIANiD94qDtUTJRfEW6GwXmtKWwl/mvqQtaTtZID2dos04
 YqBbshiJbejgVJjy+HODcNUIKBB3PSLaln4ltdsV73SBcwUNdzebfKspAQunCM22Mn6FBIxQ
 GizsMLcP/0FX4en9NaKGfK6ZdKK6kN1GR9YffMJd2P08EO8mHowmSRe/ExAODhAs9W7XXExw
 UNCY4pVJyRPpEhv373vvff60bHxc1k/FF9WaPscMt7hlkbFLUs85kHtQAmr8pV5Hy9ezsSRa
 GzJmiVclkPc2BY592IGBXRDQ38urXeM4nfhhvqA50b/nAEXc6FzqgXqDkEIwR66/Gbp0t3+r
 yQzpKRyQif3OwE0ETVkGzwEIALyKDN/OGURaHBVzwjgYq+ZtifvekdrSNl8TIDH8g1xicBYp
 QTbPn6bbSZbdvfeQPNCcD4/EhXZuhQXMcoJsQQQnO4vwVULmPGgtGf8PVc7dxKOeta+qUh6+
 SRh3vIcAUFHDT3f/Zdspz+e2E0hPV2hiSvICLk11qO6cyJE13zeNFoeY3ggrKY+IzbFomIZY
 4yG6xI99NIPEVE9lNBXBKIlewIyVlkOaYvJWSV+p5gdJXOvScNN1epm5YHmf9aE2ZjnqZGoM
 Mtsyw18YoX9BqMFInxqYQQ3j/HpVgTSvmo5ea5qQDDUaCsaTf8UeDcwYOtgI8iL4oHcsGtUX
 oUk33HEAEQEAAcLAXwQYAQIACQUCTVkGzwIbDAAKCRAWmrexpM/4rrXiB/sGbkQ6itMrAIfn
 M7IbRuiSZS1unlySUVYu3SD6YBYnNi3G5EpbwfBNuT3H8//rVvtOFK4OD8cRYkxXRQmTvqa3
 3eDIHu/zr1HMKErm+2SD6PO9umRef8V82o2oaCLvf4WeIssFjwB0b6a12opuRP7yo3E3gTCS
 KmbUuLv1CtxKQF+fUV1cVaTPMyT25Od+RC1K+iOR0F54oUJvJeq7fUzbn/KdlhA8XPGzwGRy
 4zcsPWvwnXgfe5tk680fEKZVwOZKIEuJC3v+/yZpQzDvGYJvbyix0lHnrCzq43WefRHI5XTT
 QbM0WUIBIcGmq38+OgUsMYu4NzLu7uZFAcmp6h8g
Organization: Linaro Developer Services
In-Reply-To: <20231028075445.3515664-1-christianshewitt@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 28/10/2023 09:54, Christian Hewitt wrote:
> The A311D on Zero2 needs active cooling and the board includes a header to
> connect a simple fan. Add pwm-fan support with basic thermal properties so
> the fan runs when connected.
> 
> Suggested-by: Yuntian Zhang <yt@radxa.com>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>   .../dts/amlogic/meson-g12b-radxa-zero2.dts    | 27 +++++++++++++++++++
>   1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> index 890f5bfebb03..895b6ea67180 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> @@ -33,6 +33,15 @@ memory@0 {
>   		reg = <0x0 0x0 0x0 0x80000000>;
>   	};
>   
> +	fan0: pwm-fan {
> +		compatible = "pwm-fan";
> +		#cooling-cells = <2>;
> +		cooling-min-state = <0>;
> +		cooling-max-state = <4>;
> +		cooling-levels = <0 64 128 192 255>;
> +		pwms = <&pwm_AO_ab 0 40000 0>;
> +	};
> +
>   	gpio-keys-polled {
>   		compatible = "gpio-keys-polled";
>   		poll-interval = <100>;
> @@ -286,6 +295,24 @@ &cpu103 {
>   	clock-latency = <50000>;
>   };
>   
> +&cpu_thermal {
> +	cooling-maps {
> +		map0 {
> +			trip = <&cpu_passive>;
> +			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};
> +
> +&ddr_thermal {
> +	cooling-maps {
> +		map0 {
> +			trip = <&ddr_passive>;
> +			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};

You should instead add a new active trips, and use them for the fan cooling-map.

Look at how it's done on the Khadas VIM3s or Odroid boards.

Neil

> +
>   &frddr_a {
>   	status = "okay";
>   };