Received: by 2002:a05:7412:419a:b0:f3:1519:9f41 with SMTP id i26csp3171583rdh; Mon, 27 Nov 2023 07:55:53 -0800 (PST) X-Google-Smtp-Source: AGHT+IHjjxOR9J0slWbobvCE7qBC6Jsq5Pdn9G/c993mO6EyaodBJy5j/Ee5J2KaXp4JC9xhzcPx X-Received: by 2002:a05:6a21:195:b0:187:cf88:1a34 with SMTP id le21-20020a056a21019500b00187cf881a34mr18145556pzb.8.1701100552877; Mon, 27 Nov 2023 07:55:52 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1701100552; cv=none; d=google.com; s=arc-20160816; b=KrnWLlqBNqiVkZz1vZivj1f9ACTUZra503PQMwl6fGqiUbnPShvxAb4+RGxlYxzD2V lju2RDCH510or3LUPh4korYwcNlp3SyOhRKBWRSN7tCeAwSl4JwCJxXKO72IrPafjxmM iltogY1hr4tdpep2HzTnmdC8OxuQrBP0Is/aq0/AtzEA1tmbT5VUbOIaj3orz0aUi1D7 zRVLNFG6Q9YOgXU5bHRDap2u3+Mi2UbTDfEqGyxPWPyZIi4M4tYTRTBHwtFjE0UF0hPj qS5IbtwYYjqZMfsk4VA8TIiNCrbPHf0H/phgxzjTViM5qeBYNDeCX5lPjPQk8hOahNB2 jt+g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:message-id:content-transfer-encoding :mime-version:subject:date:from:dkim-signature; bh=d8MMdLwOnB1QTRyQh+U10EChfRoJeTQS+0yevJYroxY=; fh=4DiUw69W5YlQHtvOXkISatYqvXQMMmvZfkgGFoICOos=; b=aaPCBar/3DGlTSShES3hAJZhFQK+dJE/GdvhiCtXZAv+TncXH9Pm0HNtOlsOCWoBD/ r/PxOUFSHcNQ5L4PB0YG/3i8OKNySk95UqchDXJ/EQ6tYB4PbljHFyFCFtNxLgYrYBe5 URgMeDAt18bHf5IgcYuJDfUyXN6JERJHLFAjVBIRx4gRyb0cRZ4MyrUlTag5+Fx5bhDm SJmJzpZBBcUMMq7fQTRKGVxfw3wlw1SOoPgM3GLJZy3RFkvkP4grTGIyRaZ8o2J4O2HP zbql/B5gD3oBUz3i+9W8Un4kA4Zw0IWRI1y0ixaXSasq8oVRSpTDyOvyVpMeX8kTQS3Z ie7g== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jto7psFl; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from agentk.vger.email (agentk.vger.email. [23.128.96.32]) by mx.google.com with ESMTPS id v10-20020a056a00148a00b006cc040f386esi5956964pfu.60.2023.11.27.07.55.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 27 Nov 2023 07:55:52 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) client-ip=23.128.96.32; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jto7psFl; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by agentk.vger.email (Postfix) with ESMTP id 1ACF08097E50; Mon, 27 Nov 2023 07:55:48 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at agentk.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234166AbjK0Pz1 (ORCPT + 99 others); Mon, 27 Nov 2023 10:55:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36898 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234133AbjK0PzS (ORCPT ); Mon, 27 Nov 2023 10:55:18 -0500 Received: from mail-lj1-x234.google.com (mail-lj1-x234.google.com [IPv6:2a00:1450:4864:20::234]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A66FFD4B for ; Mon, 27 Nov 2023 07:55:23 -0800 (PST) Received: by mail-lj1-x234.google.com with SMTP id 38308e7fff4ca-2c878e228b4so54285651fa.1 for ; Mon, 27 Nov 2023 07:55:23 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1701100522; x=1701705322; darn=vger.kernel.org; h=cc:to:message-id:content-transfer-encoding:mime-version:subject :date:from:from:to:cc:subject:date:message-id:reply-to; bh=d8MMdLwOnB1QTRyQh+U10EChfRoJeTQS+0yevJYroxY=; b=jto7psFlX2DR/p/Stf266r/qEhGESEY3UxbdX7Wxau/vaVhponkXxeB137pWQMmeuo NRyxL+rWqzNDSXul6AdmZe0ivO78p1s+Waaia5xxTNRfJjaIfzis5B5RmwgYeUMubXJl nxSCr6BoIZCf09webal0L4MY9LRo8TuknWbp8hrq0z5tH6sdbh3dE0pBeByqO5pq/WRm Z50IaAOjBly1LKvKOc+ho7cN7QZjx6E6oWrDQnhvYj92qJ7bZ9NWSWp3rFgCtl+mBwhX MXBAVE5noFSxVFAmYpSmrPa9BrqNF+4DsUKS9MUeALTenmdTo/vEQP2X9BP0nCQmdafP Y89A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1701100522; x=1701705322; h=cc:to:message-id:content-transfer-encoding:mime-version:subject :date:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=d8MMdLwOnB1QTRyQh+U10EChfRoJeTQS+0yevJYroxY=; b=DEWzluplQ6yoALj0p6YyM8t7z9hzzaPJGPuPRsLaHe8jj0NDEzPFJc72PC2Bgr9UYm blaHw9WHCqUjVr2wVZZVIWfT47tJ73LY9vmkW5wTsg3b8uryrfnm1CCbu2rpvrju5s18 s7YJ65HFj8ufgVK+wHxftqFcIsQRE6NLOBUabVXyYkxiKM/D1RcGPmkGnw9sD4PTyA+Q AtGHknNrM9b//Ba4uzas5vf9muPLNlOWTGZgbZGyl3bjGWnD/N45A+wIglpdIhJLbK/+ 8okNFRiU1wA7graFQTF4MEU0sgichZE1AieNZoRoEPLxyLapUlFVHtbdBq9wk4icyQ0r XxBA== X-Gm-Message-State: AOJu0YzOQeolrkbeNYUGnZZk8U39KtRtdvMsOJNkuku9Yq00ljk/7ah2 JbKWsXNqFOsmrcaIl2NiKFF3og== X-Received: by 2002:a2e:998c:0:b0:2c5:19ab:7270 with SMTP id w12-20020a2e998c000000b002c519ab7270mr7364544lji.35.1701100521706; Mon, 27 Nov 2023 07:55:21 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id b1-20020a05651c032100b002bfff335ca1sm1386988ljp.79.2023.11.27.07.55.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 27 Nov 2023 07:55:21 -0800 (PST) From: Linus Walleij Date: Mon, 27 Nov 2023 16:55:20 +0100 Subject: [PATCH v9] ARM: dts: nxp: Fix some common switch mistakes MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231127-mv88e6xxx-nxp-v9-1-69f3f783f4af@linaro.org> X-B4-Tracking: v=1; b=H4sIAOe7ZGUC/6tWKk4tykwtVrJSqFYqSi3LLM7MzwNyLHUUlJIzE vPSU3UzU4B8JSMDI2NDQyNz3dwyC4tUs4qKCt28igJdU/NUSwPDZBNTY4tUJaCegqLUtMwKsHn RsbW1AKsRE6dfAAAA To: Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Stefan Agner , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Andrew Lunn , Florian Fainelli , Linus Walleij X-Mailer: b4 0.12.4 X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on agentk.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (agentk.vger.email [0.0.0.0]); Mon, 27 Nov 2023 07:55:48 -0800 (PST) Fix some errors in the Marvell MV88E6xxx switch descriptions: - switch0@0 is not OK, should be ethernet-switch@0 - ports should be ethernet-ports - port should be ethernet-port - phy should be ethernet-phy Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij --- This patch is split off from the actual bindings so these can be merged to netdev. Applying it will fix warnings that will appear from device tree checks. Link to v9 bindings patches: https://lore.kernel.org/r/20231127-marvell-88e6152-wan-led-v9-0-272934e04681@linaro.org --- arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts | 14 ++--- arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts | 70 ++++++++++++------------ arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts | 18 +++--- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts | 20 +++---- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts | 18 +++--- 5 files changed, 70 insertions(+), 70 deletions(-) diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec8957b..7e72f860c3c5 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ port@5 { sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a19..77492eeea450 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ mdio_mux_1: mdio@1 { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ fixed-link { }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ mdio_mux_2: mdio@2 { #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ fixed-link { }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ mdio_mux_4: mdio@4 { #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ port@2 { sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ port@3 { sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ port@4 { sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ port@5 { sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ port@6 { sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ port@7 { sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ port@9 { sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ mdio_mux_8: mdio@8 { #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ port@2 { sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ port@3 { sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ port@4 { sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ fixed-link { }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804ecaea..2a490464660c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9b7..078d8699e16d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ port@9 { }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de315..22c8f44390a9 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; --- base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86 change-id: 20231127-mv88e6xxx-nxp-57e901c4538e Best regards, -- Linus Walleij