Received: by 2002:a05:7412:419a:b0:f3:1519:9f41 with SMTP id i26csp3397632rdh; Mon, 27 Nov 2023 13:12:24 -0800 (PST) X-Google-Smtp-Source: AGHT+IHSypgZbCade2RvcD2KrBwjf38gCDyoV/6Cxz2AbrvL6KwKCp5LMbNTQzoxy217aIgKy8NU X-Received: by 2002:a17:903:2286:b0:1cf:b964:5e36 with SMTP id b6-20020a170903228600b001cfb9645e36mr9012319plh.44.1701119544311; Mon, 27 Nov 2023 13:12:24 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1701119544; cv=none; d=google.com; s=arc-20160816; b=cGptpq7KpLDURNYf/zbqAK2RZQ4NgKu9EyYlVZdHPJtxsYqZXLsGzCxS+Zv73c7jWc +lCEMlLu1nMojrLgtELEIGMqWdBMn3Pbk8gt3Dm2ef4VejaGFSp5QN+xPG0ipQu2p+52 NmdLL96wOne8rlucSTQZEi4KtaJmOwhbm/kaqGdLxEKlNzwOlweQ9bSb+qnGSKRZEqev F3jRAi1OCjazol0l/4MhB1N4rYfhB5uS+3J4k4Cs0veJYu7SB2CprGhL4EYoMShin0Av v8LMI7zc3CgpZy/mXeepdLjmImdJSfJB3q3zmJTS9Qi2or470oDFVpLkW6j3cVMja6eC KZrQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from; bh=cORgHR6B0vDLQIEeP5mQcNAw2m8uDd0YKaZx0xKFSNg=; fh=hbmruVEpE/bwP2mje1r+ApZDTEnmeQF4nIJkCdsrkAE=; b=p+LMJ9maNCR2r87i4kel846QokjQHa0Xw2w0FVzfH2EdQtE8heR8ESuKoyLNW7ly9u s0O1P1wVoemnr6sGxkZd5kkPSVztalV5XULnaOc/9Oc1Ql5ZOSi0uZFjHPjJoBDhCdQY 3WmNdBAkjWU4kbAOnZbFu1POPaDL0p0MOLUIW7G3YqcFpekQoWLWwveInk4V0/QOBz4U Y9eALWIvtpcYBUvdaRepcTDBfyp0nSW1UQ6mwou4Wz4YxiiUtbeMdJLntmjlC2B1u4Ig YoKOqmQ2Jht+e9i0y2bYb815P512L+JOs/IVOC5146/hQWixh4A64u5bSUBP+mIqlMyr pmww== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from howler.vger.email (howler.vger.email. [23.128.96.34]) by mx.google.com with ESMTPS id z12-20020a170902d54c00b001c9af07788csi10599415plf.76.2023.11.27.13.12.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 27 Nov 2023 13:12:24 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by howler.vger.email (Postfix) with ESMTP id 96F6082A41F7; Mon, 27 Nov 2023 13:12:18 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at howler.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229527AbjK0VLu (ORCPT + 99 others); Mon, 27 Nov 2023 16:11:50 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53258 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233224AbjK0VLs (ORCPT ); Mon, 27 Nov 2023 16:11:48 -0500 Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [IPv6:2a0a:edc0:2:b01:1d::104]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 87DF419D for ; Mon, 27 Nov 2023 13:11:52 -0800 (PST) Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1r7itI-0004lH-8W; Mon, 27 Nov 2023 22:11:40 +0100 Received: from [2a0a:edc0:0:1101:1d::ac] (helo=dude04.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1r7itH-00C1q2-Hb; Mon, 27 Nov 2023 22:11:39 +0100 Received: from rhi by dude04.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1r7itH-00FAHs-1P; Mon, 27 Nov 2023 22:11:39 +0100 From: Roland Hieber Date: Mon, 27 Nov 2023 22:11:06 +0100 Subject: [PATCH 5/5] ARM: dts: add support for Gossen Metrawatt Profitest MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231127-b4-imx7-var-som-gome-v1-5-f26f88f2d0bc@pengutronix.de> References: <20231127-b4-imx7-var-som-gome-v1-0-f26f88f2d0bc@pengutronix.de> In-Reply-To: <20231127-b4-imx7-var-som-gome-v1-0-f26f88f2d0bc@pengutronix.de> To: Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Li Yang Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, Roland Hieber , Marco Felsch , Philipp Zabel , Michael Tretter X-Mailer: b4 0.12.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: auto@pengutronix.de X-SA-Exim-Scanned: No (on metis.whiteo.stw.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org X-Spam-Status: No, score=-0.8 required=5.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on howler.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (howler.vger.email [0.0.0.0]); Mon, 27 Nov 2023 13:12:18 -0800 (PST) From: Marco Felsch This is the initial support for the Gossen Metrawatt Profitest MF (e143_01) board based on a Variscite VAR-SOM-MX7 SoM. Signed-off-by: Marco Felsch Co-developed-by: Philipp Zabel Signed-off-by: Philipp Zabel Co-developed-by: Michael Tretter Signed-off-by: Michael Tretter Co-developed-by: Roland Hieber Signed-off-by: Roland Hieber --- Documentation/devicetree/bindings/arm/fsl.yaml | 7 + arch/arm/boot/dts/nxp/imx/Makefile | 1 + arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts | 559 +++++++++++++++++++++++ 3 files changed, 567 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 32b195852a75..b751d289c712 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -900,6 +900,13 @@ properties: - const: toradex,colibri-imx7d-emmc - const: fsl,imx7d + - description: Variscite VAR-SOM-MX7 based boards + items: + - enum: + - gome,e143_01 # Gossen Metrawatt Profitest MF (e143_01) + - const: variscite,var-som-mx7 + - const: fsl,imx7d + - description: i.MX7ULP based Boards items: - enum: diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index a724d1a7a9a0..f0a68c715a61 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-iris-v2.dtb \ imx7d-flex-concentrator.dtb \ imx7d-flex-concentrator-mfg.dtb \ + imx7d-gome-e143_01.dtb \ imx7d-mba7.dtb \ imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts new file mode 100644 index 000000000000..6e98d34b2e54 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts @@ -0,0 +1,559 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Gossen Metrawatt GmbH + * Copyright (C) 2022 Marco Felsch, Pengutronix + * Copyright (C) 2022 Philipp Zabel, Pengutronix + * Copyright (C) 2022 Roland Hieber, Pengutronix + */ +/dts-v1/; + +#include +#include +#include +#include "imx7d-var-som-mx7.dtsi" + +/ { + model = "Gossen Metrawatt Profitest MF (e143_01)"; + compatible = "gome,e143_01", "variscite,var-som-mx7", "fsl,imx7d"; + + aliases { + gpio7 = &gpio8; + rtc0 = &rtc0; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmode>; + sdmode-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; // Pin 60 AUDIO_SHDN_B + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>, <&pinctrl_gpio_keys_2>; + autorepeat; + + button-0 { + label = "S0"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; // Pin 183 BTN_S0_ESC + linux,code = ; + wakeup-source; + }; + + button-1 { + label = "S1"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; // Pin 185 BTN_S1_MEM + linux,code = ; + wakeup-source; + }; + + button-2 { + label = "S2"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; // Pin 181 BTN_S2_HLP + linux,code = ; + wakeup-source; + }; + + button-3 { + label = "S3"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; // Pin 1 BTN_S3_STA + linux,code = ; + wakeup-source; + }; + + button-4 { + label = "S4"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; // Pin 168 BTN_S4_IDN + linux,code = ; + wakeup-source; + }; + + button-5 { + label = "S5"; + gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; // Pin 28 BTN_S5 + linux,code = ; + }; + + button-6 { + label = "S6"; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; // Pin 40 BTN_S6 + linux,code = ; + }; + + button-7 { + label = "S7"; + gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; // Pin 38 BTN_S7 + linux,code = ; + }; + + button-8 { + label = "S8"; + gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; // Pin 36 BTN_S8 + linux,code = ; + }; + + button-9 { + label = "S9"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; // Pin 20 BTN_S9 + linux,code = ; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_poweroff>; + gpios = <&gpio7 14 GPIO_ACTIVE_LOW>; // Pin 7 POWER_OFF_B + input; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc2 0>, // ARS_VAL + <&adc2 1>, // VBAT_VAL + <&adc2 2>, // LCD_BACKLIGHT_VAL + <&adc2 3>; // VCC_5V0_FB + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_debug_led>; + + test-led-1 { + label = "test-led-1:red"; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; // Pin 44 LED_TEST1_B + color = ; + linux,default-trigger = "disk-activity"; + }; + + test-led-2 { + label = "test-led-2:red"; + gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; // Pin 46 LED_TEST2_B + color = ; + linux,default-trigger = "heartbeat"; + }; + }; + + leds2 { + compatible = "gpio-leds"; + + led_netz_gn { + label = "mains:green"; + gpios = <&gpio8 9 GPIO_ACTIVE_LOW>; // LED_NETZ_GN + color = ; + }; + + led_netz_rt { + label = "mains:red"; + gpios = <&gpio8 8 GPIO_ACTIVE_LOW>; // LED_NETZ_RT + color = ; + default-state = "on"; + }; + + led_debug_gn { + label = "debug:green"; + gpios = <&gpio8 0 GPIO_ACTIVE_LOW>; // LED_DEBUG_GN + color = ; + }; + + led_debug_rt { + label = "debug:red"; + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; // LED_DEBUG_RT + color = ; + }; + + led_ul_gn { + label = "ulrl:green"; + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; // LED_UL_GN + color = ; + }; + + led_ul_rt { + label = "ulrl:red"; + gpios = <&gpio8 6 GPIO_ACTIVE_LOW>; // LED_UL_RT + color = ; + default-state = "on"; + }; + + led_rcd_gn { + label = "rcd:green"; + gpios = <&gpio8 3 GPIO_ACTIVE_LOW>; // LED_RCD_GN + color = ; + }; + + led_rcd_rt { + label = "rcd:red"; + gpios = <&gpio8 7 GPIO_ACTIVE_LOW>; // LED_RCD_RT + color = ; + default-state = "on"; + }; + }; + + reg_vled_backlight: regulator-vled-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_backlight>; + regulator-name = "VLED_BACKLIGHT"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <20000000>; + regulator-max-microvolt = <20000000>; + enable-active-high; + }; + + reg_vcc_3v3_per: regulator-vcc-3v3-per { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vcc_3v3_per>; + regulator-name = "VCC_3V3_PER"; + gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; // Pin 83 VCC_3V3_PER_EN + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <30000>; + enable-active-high; + regulator-always-on; + }; + + reg_vcc_5v0_per: regulator-vcc-5v0-per { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vcc_5v0_per>; + regulator-name = "VCC_5V0_PER"; + gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; // Pin 75 VCC_5V0_PER_EN + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + }; + + reg_imt: regulator-imt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_imt>; + regulator-name = "VCC_IMT"; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; // Pin 66 MT_EN + regulator-min-microvolt = <9000000>; + regulator-max-microvolt = <9000000>; + enable-active-high; + }; + + reg_vcc_1v8_alg: regulator-vcc-1v8-alg { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_ALG"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_vcc_3v3_per>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "max98357aaudio"; + /delete-property/ simple-audio-card,widgets; + /delete-property/ simple-audio-card,routing; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&max98357a>; + }; + }; + + uc-imt-power { + compatible = "reg-userspace-consumer"; + regulator-name = "reg_imt-consumer"; + regulator-supplies = "vcc"; + vcc-supply = <®_imt>; + }; +}; + +&adc2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + /delete-node/ wm8731@1a; + + /* DS1339 RTC module */ + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + trickle-resistor-ohms = <250>; + interrupt-parent = <&gpio1>; + interrupts = <13 GPIO_ACTIVE_LOW>; // Pin 120 RTC_INT_B + wakeup-source; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio4 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 175 I2C4_SCL + sda-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 173 I2C4_SDA + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + gpio8: max7312@23 { + compatible = "maxim,max7312"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_DEBUG_GN", "LED_DEBUG_RT", "LED_UL_GN", "LED_RCD_GN", + "", "", "LED_UL_RT", "LED_RCD_RT", + "LED_NETZ_RT", "LED_NETZ_GN", "", "", + "DP_HW_CODE_1", "DP_HW_CODE_2", "DP_HW_CODE_3", "DP_HW_CODE_4"; + vcc-supply = <®_vcc_3v3_per>; + }; +}; + +&gpio1 { + gpio-line-names = "GWDOG_RST_B", "BTN_S3_STA", "BTN_S4_IDN", "", + "", "", "", "USB_HOST_PWR_EN", + "", "", "BTN_S2_HLP", "BTN_S1_MEM", + "BTN_S0_ESC", "RTC_INT_B", "SOM: bt reg on"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "DBG_GPIO1", "DBG_GPIO2", "DBG_GPIO3", "DBG_GPIO4", + "", "", "", "", + "MT_RXD", "MT_TXD", "", "", + "", "", "", "", + "", "", "", "", + "", "", "VCC_3V3_PER_EN", "", + "DSI_RESET", "VCC_5V0_PER_EN"; +}; + +&gpio3 { + gpio-line-names = "", "", "LED_TEST1_B", "LED_TEST2_B", + "BTN_S8", "BTN_S6", "MT_RESET", "", + "", "", "MT_EN", "", + "", "", "", "", + "", "", "", "", + "AUDIO_SHDN_B", "", "BTN_S7", "", + "BTN_S5", "", "", "BTN_S9", + "BATT_LOW"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "I2C1_SCL", "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", + "", "", "I2C4_SCL", "I2C4_SDA", + "", "", "", "", + "", "", "", "HIL_SPI_CS0"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "SOM: ethphy0 reset"; +}; + +&gpio6 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "SOM: sd3_pwr (eMMC)"; +}; + +&gpio7 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "LCD_BACKLIGHT_EN", "", "POWER_OFF_B"; +}; + +&lcdif { + assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>, + <&clks IMX7D_PLL_VIDEO_POST_DIV>; + assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>; + assigned-clock-rates = <0>, <128000000>; + status = "okay"; +}; + +&mipi_dsi { + samsung,burst-clock-frequency = <850000000>; + status = "okay"; + + panel@0 { + compatible = "tianma,tm050jdhg33", "ilitek,ili9881c"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_panel>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; // Pin 73 DSI_RESET + power-supply = <®_vcc_3v3_per>; + dsi-lanes = <2>; + + rotation = <90>; + + ilitek,enable-internal-backlight; + default-brightness = <2047>; + ilitek,pwm-frequency = <50000>; + ilitek,backlight-supply = <®_vled_backlight>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&iomuxc_lpsr { + pinctrl_gpio_keys_2: pinctrl_gpio_keys_2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0C + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0C + >; + }; + + pinctrl_usbotg2_pwr: pinctrl_usbotg2_pwrgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 + >; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: pinctrl-gpio-keysgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x0000000C + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0000000C + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0000000C + MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x0000000C + MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x0000000C + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0000000C + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0000000C + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x0000000C + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x4000007f + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x4000007f + >; + }; + + pinctrl_mipi_backlight: mipi-backlightgrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x0000001B + >; + }; + + pinctrl_mipi_panel: mipi-panelgrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x0000001B /* DSI_RESET */ + >; + }; + + pinctrl_poweroff: pinctrl_poweroffgrp { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0000001B + >; + }; + + pinctrl_reg_vcc_3v3_per: pinctrl_reg_vcc_3v3_pergrp { + fsl,pins = < + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x0000001B + >; + }; + + pinctrl_reg_vcc_5v0_per: pinctrl_reg_vcc_5v0_pergrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x0000001B + >; + }; + + pinctrl_reg_imt: pinctrl_reg_imtgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x0000001B + >; + }; + + pinctrl_rtc: pinctrl_rtcgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0000001B + >; + }; + + pinctrl_sai3: pinctrl_sai3grp { + fsl,pins = < + MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x0000001F + MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x0000001F + MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x00000030 + >; + }; + + pinctrl_sdmode: pinctrl_sdmodegrp { + fsl,pins = < + MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0000001F + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 /* DEBUG_UART1_TXD */ + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 /* DEBUG_UART1_RXD */ + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x79 + >; + }; + + pinctrl_debug_led: pinctrl_debug_ledgrp { + fsl,pins = < + MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00000003 + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00000003 + >; + }; +}; -- 2.39.2