Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) client-ip=23.128.96.35;
From:   Herve Codina <herve.codina@bootlin.com>
To:     Herve Codina <herve.codina@bootlin.com>,
        Qiang Zhao <qiang.zhao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Shengjiu Wang <shengjiu.wang@gmail.com>,
        Xiubo Li <Xiubo.Lee@gmail.com>,
        Fabio Estevam <festevam@gmail.com>,
        Nicolin Chen <nicoleotsuka@gmail.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Jaroslav Kysela <perex@perex.cz>,
        Takashi Iwai <tiwai@suse.com>,
        Christophe Leroy <christophe.leroy@csgroup.eu>
Cc:     Arnd Bergmann <arnd@arndb.de>, linuxppc-dev@lists.ozlabs.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        alsa-devel@alsa-project.org,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH 16/17] soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan()
Date:   Tue, 28 Nov 2023 15:08:15 +0100
Message-ID: <20231128140818.261541-17-herve.codina@bootlin.com>
In-Reply-To: <20231128140818.261541-1-herve.codina@bootlin.com>
References: <20231128140818.261541-1-herve.codina@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Timeslots setting is done at channel start() and stop().
There is no more need to do that during setup_chan().

Simply remove timeslot setting from setup_chan().

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 drivers/soc/fsl/qe/qmc.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
index e56aea5803bf..73903ce31695 100644
--- a/drivers/soc/fsl/qe/qmc.c
+++ b/drivers/soc/fsl/qe/qmc.c
@@ -723,30 +723,6 @@ static int qmc_chan_setup_tsa_rx(struct qmc_chan *chan, bool enable)
 	return qmc_chan_setup_tsa_32rx(chan, &info, enable);
 }
 
-static int qmc_chan_setup_tsa(struct qmc_chan *chan, bool enable)
-{
-	struct tsa_serial_info info;
-	int ret;
-
-	/* Retrieve info from the TSA related serial */
-	ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info);
-	if (ret)
-		return ret;
-
-	/*
-	 * Setup one common 64 entries table or two 32 entries (one for Tx
-	 * and one for Tx) according to assigned TS numbers.
-	 */
-	if (chan->qmc->is_tsa_64rxtx)
-		return qmc_chan_setup_tsa_64rxtx(chan, &info, enable);
-
-	ret = qmc_chan_setup_tsa_32rx(chan, &info, enable);
-	if (ret)
-		return ret;
-
-	return qmc_chan_setup_tsa_32tx(chan, &info, enable);
-}
-
 static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)
 {
 	return cpm_command(chan->id << 2, (qmc_opcode << 4) | 0x0E);
@@ -1323,10 +1299,6 @@ static int qmc_setup_chan(struct qmc *qmc, struct qmc_chan *chan)
 
 	chan->qmc = qmc;
 
-	ret = qmc_chan_setup_tsa(chan, true);
-	if (ret)
-		return ret;
-
 	/* Set channel specific parameter base address */
 	chan->s_param = qmc->dpram + (chan->id * 64);
 	/* 16 bd per channel (8 rx and 8 tx) */
-- 
2.42.0