Received: by 2002:a05:7412:b10a:b0:f3:1519:9f41 with SMTP id az10csp242521rdb; Thu, 30 Nov 2023 03:50:04 -0800 (PST) X-Google-Smtp-Source: AGHT+IEYQiuaV4p+ekfgcJrQln317ji9XvsRj5haW6qgrPQqs03ZIWYomcnVT5kZNYXuACft0V6d X-Received: by 2002:a05:6a00:2e8e:b0:6cb:bc85:1bed with SMTP id fd14-20020a056a002e8e00b006cbbc851bedmr23225084pfb.33.1701345004033; Thu, 30 Nov 2023 03:50:04 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1701345004; cv=none; d=google.com; s=arc-20160816; b=Sfn0iOChRCqdz2q9GaPhaYwyzwsm5sFMQQrBgnPLI3MXivQmfuEEpSZHWwnv2gwfvb potoqV9VX2FkzWU+F1HkIyl9s0PuuWcFGBjImc4hNNnHLzQWUpKPXx8MU/SWXEJS91Qe /FJ+aMkmjtbVKtfFHh9W7nepbNrc+QLEHoUxOHM40ZGoN1Y9ACWKI1H0EMx+NRPW9Txk z271V3Zw6K1HCsTpjTTSh63cCWyp9b5Ou+qEIVlEbb/nhX8k3l3bkxjvjA8qShhdjbCO 2IgFEgEhKv5Et2Ax/d/FPsFn84YkMZiYsYqJmedTBF3LyszzMt3jLzt6MYTO0+RTKGV8 GFOA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:in-reply-to:from :references:cc:to:content-language:subject:user-agent:mime-version :date:message-id:dkim-signature; bh=XPozXhOeCZNciAVI/yZQ5BvQ94ESwsVh27cyxy07HJY=; fh=qbM/lAEZP8KqDUA63FE4FuD+YJjNGVeGKVXy3Zs/0iY=; b=ACXDUxx+1Z48aitTN4y+AxWDyxYqtvXV+mWJcxN8wblnakWvdkrMLSqRgs0D+IYINB ZGE0iX3Nw+Q/O39lj4sXi6+S7PdZGVDQUKmKM4vuLRymnsBVVcXginV1nC9rCzk8pa7A s0ExYeodeRXYsnW4a+kwbZ2pwc6MVnhW7GN2WYQ68ZliDe4BFo1nvfFamPgDxsdwcj01 E/FLZXtUXUrst4Jn59V/74rzSZsn/6YmzldOKC6BBdWgzWXp3sYt732JkwNHVvXsOKvU wv+KmHDx4uEO4K2Tb2+GIXyiUq5dGiZXtrizHLH69wOZ0KaWJBXo/6KAKFmtVOP66SxK 8SWw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=R9E6RdTO; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from lipwig.vger.email (lipwig.vger.email. [2620:137:e000::3:3]) by mx.google.com with ESMTPS id f15-20020a056a001acf00b006cb8505bc3fsi1107056pfv.40.2023.11.30.03.50.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 30 Nov 2023 03:50:04 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=R9E6RdTO; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by lipwig.vger.email (Postfix) with ESMTP id CB69B802F566; Thu, 30 Nov 2023 03:49:57 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at lipwig.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345191AbjK3LtI (ORCPT + 99 others); Thu, 30 Nov 2023 06:49:08 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38284 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345175AbjK3LtH (ORCPT ); Thu, 30 Nov 2023 06:49:07 -0500 Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A205B10CE for ; Thu, 30 Nov 2023 03:49:09 -0800 (PST) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 091EAC433C8; Thu, 30 Nov 2023 11:49:05 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1701344949; bh=SDuxsjNsfCb28aE/m4f1ywlUx4T7oeJtWKHQzMJTHd0=; h=Date:Subject:To:Cc:References:From:In-Reply-To:From; b=R9E6RdTOG9mchODYv0jZtwonSjwnO2RfHhnZ2GJPmka1dPj48iIYcF0/OANzQHTOL SFha1Fgs9+P0tCfpHuww5fMyWCZVVdn3HrMKdlZkMR+lvVVSvwLD7+OWqUWnpFOVRn lOqpPvsHxTQlsyjbJ3c1BkvKg4HL73pCn+Tzryaccbmd3lFdzB6nIkdNQcuzHtfiDX 8eKReq4+QtggfaJHUgSJO2G+4zxQdTrbgACfIR6K5CDUE+R326RVjhivm/qs+2oET8 hC7aK+z5I3OM50PsespcUtX0s3kQgj3tNgfkN832ueRP3ub6LcofEaJLHLh3IY/YKa h9wgEb+QETKeg== Message-ID: <6def78e7-8264-4745-94f3-b32b854af0c2@kernel.org> Date: Thu, 30 Nov 2023 13:49:03 +0200 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH v6 net-next 6/7] net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support Content-Language: en-US To: Vladimir Oltean Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, s-vadapalli@ti.com, r-gunasekaran@ti.com, vigneshr@ti.com, srk@ti.com, horms@kernel.org, p-varis@ti.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org References: <20231120140147.78726-1-rogerq@kernel.org> <20231120140147.78726-7-rogerq@kernel.org> <20231120232620.uciap4bazypzlg3g@skbuf> <20231121115314.deuvdjk64rcwktl4@skbuf> From: Roger Quadros In-Reply-To: <20231121115314.deuvdjk64rcwktl4@skbuf> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-Spam-Status: No, score=-1.2 required=5.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lipwig.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (lipwig.vger.email [0.0.0.0]); Thu, 30 Nov 2023 03:49:57 -0800 (PST) Hi Vladimir, On 21/11/2023 13:53, Vladimir Oltean wrote: > On Tue, Nov 21, 2023 at 01:02:50PM +0200, Roger Quadros wrote: >> Yes I'm using openlldp master. >> >> So I just dumped the "ethtool --show-mm" right before the "lldptool -i $h1 -t -n -V addEthCaps" >> and this is what I see >> >> # MAC Merge layer state for eth0: >> # pMAC enabled: on >> # TX enabled: off >> # TX active: off >> # TX minimum fragment size: 252 >> # RX minimum fragment size: 124 >> # Verify enabled: off >> # Verify time: 10 >> # Max verify time: 134 >> # Verification status: DISABLED >> # >> # MAC Merge layer state for eth1: >> # pMAC enabled: on >> # TX enabled: off >> # TX active: off >> # TX minimum fragment size: 124 >> # RX minimum fragment size: 124 >> # Verify enabled: off >> # Verify time: 10 >> # Max verify time: 134 >> # Verification status: DISABLED >> # >> # Additional Ethernet Capabilities TLV >> # Preemption capability supported >> # Preemption capability not enabled >> # Preemption capability not active >> # Additional fragment size: 3 (252 octets) >> # Additional Ethernet Capabilities TLV >> # Preemption capability supported >> # Preemption capability not enabled >> # Preemption capability not active >> # Additional fragment size: 1 (124 octets) >> # Warning: Stopping lldpad.service, but it can still be activated by: >> # lldpad.socket >> # TEST: LLDP [FAIL] >> >> >> If I add the following lines at the beginning of lldp() routine, >> then it works. >> >> lldp() >> { >> RET=0 >> >> + ethtool --set-mm $h1 tx-enabled on verify-enabled on >> + ethtool --set-mm $h2 tx-enabled on verify-enabled on >> ... >> } >> >> Is lldp supposed to turn on tx-enabled and verify-enabled for us >> or it is test scritps responsibility? > > lldpad should absolutely do that. > https://github.com/intel/openlldp/blob/master/lldp_8023.c#L701 > > Try to see what goes on and if there isn't, in fact, an error during the > netlink communication with the kernel. > > Edit /usr/local/lib/systemd/system/lldpad.service: > ExecStart=/usr/local/sbin/lldpad -t -V 7 > ~~~~~ > increases log level > Then run: > > $ systemctl daemon-reload > $ journalctl -u lldpad.service -f & > $ ./ethtool_mm.sh eno0 swp0 > > During the test you should see: > > lldpad[4764]: eno0: Link partner preemption capability supported > lldpad[4764]: eno0: Link partner preemption capability not enabled > lldpad[4764]: eno0: Link partner preemption capability not active > lldpad[4764]: eno0: Link partner minimum fragment size: 252 octets > lldpad[4764]: eno0: initiating MM verification with a retry interval of 127 ms... > lldpad[4764]: rxProcessFrame: allocated TLV 0 was not stored! 0xaaaafd7cfbe0 > lldpad[4764]: swp0: Link partner preemption capability supported > lldpad[4764]: swp0: Link partner preemption capability not enabled > lldpad[4764]: swp0: Link partner preemption capability not active > lldpad[4764]: swp0: Link partner minimum fragment size: 60 octets > lldpad[4764]: swp0: initiating MM verification with a retry interval of 128 ms... > lldpad[4764]: rxProcessFrame: allocated TLV 0 was not stored! 0xaaaafd7cfd30 > Thanks for the debug instructions. Indeed lldpad tries to enable MM TX and the network drivers set_mm() hook gets called and returns success but still lldpad sees some error. I've also confirmed that ethnl_set_mm() runs successfully and returns 1. I suppose something is going wrong in user-space with libnl? Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner preemption capability supported Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner preemption capability not enabled Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner preemption capability not active Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner minimum fragment size: 124 octets Nov 21 11:50:02 am62xx lldpad[708]: eth0: initiating MM verification with a retry interval of 134 ms... Nov 21 11:50:02 am62xx lldpad[708]: ethtool: kernel reports: integer out of range full debug log is below. -- cheers, -roger root@am62xx:~/kselftest# ./run_kselftest.sh -t net/forwarding:ethtool_mm.sh [ 207.146038] kselftest: Running tests in net/forwarding TAP version 13 1..1 # timeout set to 0 # selftests: net/forwarding: ethtool_mm.sh # Error: Exclusivity flag on, cannot modify. Nov 21 11:49:54 am62xx systemd[1]: Started lldpad.service - Link Layer Discovery Protocol Agent Daemon.. Nov 21 11:49:54 am62xx lldpad[708]: setsockopt nearest_bridge: Invalid argument Nov 21 11:49:54 am62xx lldpad[708]: setsockopt nearest_bridge: Invalid argument Nov 21 11:49:54 am62xx lldpad[708]: setsockopt nearest_bridge: Invalid argument Nov 21 11:49:54 am62xx lldpad[708]: setsockopt nearest_bridge: Invalid argument Nov 21 11:49:54 am62xx lldpad[708]: using fd 3 from systemd Nov 21 11:49:54 am62xx lldpad[708]: event_iface_init_user_space(484): socket 4. Nov 21 11:49:54 am62xx lldpad[708]: mand_register:done Nov 21 11:49:54 am62xx lldpad[708]: basman_register:done Nov 21 11:49:54 am62xx lldpad[708]: dcbx_register: dcbx register done Nov 21 11:49:54 am62xx lldpad[708]: med_register:done Nov 21 11:49:54 am62xx lldpad[708]: ieee8023_register:done Nov 21 11:49:54 am62xx lldpad[708]: evb_register:done Nov 21 11:49:54 am62xx lldpad[708]: evb22_register:done Nov 21 11:49:54 am62xx lldpad[708]: vdp_register: done Nov 21 11:49:54 am62xx lldpad[708]: vdp22_register:done Nov 21 11:49:54 am62xx lldpad[708]: ecp22_register: done Nov 21 11:49:54 am62xx lldpad[708]: ieee8021qaz_register: ieee8021qaz_register SUCCESS Nov 21 11:49:54 am62xx lldpad[708]: can0 mac:00:00:00:00:00:00 perm:00:00:00:00:00:00 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:54 am62xx lldpad[708]: Failed to open register layer 2 access to ETH_P_LLDP Nov 21 11:49:54 am62xx lldpad[708]: init_ports: Error adding device can0 Nov 21 11:49:54 am62xx lldpad[708]: can1 mac:00:00:00:00:00:00 perm:00:00:00:00:00:00 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:54 am62xx lldpad[708]: Failed to open register layer 2 access to ETH_P_LLDP Nov 21 11:49:54 am62xx lldpad[708]: init_ports: Error adding device can1 Nov 21 11:49:54 am62xx lldpad[708]: can2 mac:00:00:00:00:00:00 perm:00:00:00:00:00:00 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:54 am62xx lldpad[708]: Failed to open register layer 2 access to ETH_P_LLDP Nov 21 11:49:54 am62xx lldpad[708]: init_ports: Error adding device can2 Nov 21 11:49:54 am62xx lldpad[708]: can3 mac:00:00:00:00:00:00 perm:00:00:00:00:00:00 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:54 am62xx lldpad[708]: Failed to open register layer 2 access to ETH_P_LLDP Nov 21 11:49:54 am62xx lldpad[708]: init_ports: Error adding device can3 Nov 21 11:49:54 am62xx lldpad[708]: eth0 mac:78:db:2f:e5:74:d3 perm:78:db:2f:e5:74:d3 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:54 am62xx lldpad[708]: eth0 MAC address is 78:db:2f:e5:74:d3 Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: creating new agent for port eth0. Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: creating new agent for eth0 (01:80:C2:00:00:0E). Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: 0 agents on if eth0. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: creating new agent for port eth0. Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: creating new agent for eth0 (01:80:C2:00:00:03). Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: agent->adminStatus = disabled. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: 1 agents on if eth0. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: creating new agent for port eth0. Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: creating new agent for eth0 (01:80:C2:00:00:00). Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: agent->adminStatus = disabled. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: 2 agents on if eth0. Nov 21 11:49:54 am62xx lldpad[708]: init_ports: calling ifup for agent 0xaaaade68e3f0. Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:49:54 am62xx lldpad[708]: mand_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:49:54 am62xx lldpad[708]: med_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: ieee8023_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: evb_ifup:eth0 agent 2 called Nov 21 11:49:54 am62xx lldpad[708]: evb_init_tlv:eth0 agent 2 EVB tx is currently disabled Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth0 agent 2 loading EVB policy for fmode failed, using default (128) Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth0 agent 2 loading EVB policy for capabilities failed, using default (0) Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth0 agent 2 loading EVB policy for rte failed, using default (15) Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth0 agent 2 loading EVB policy for vsis failed, using default (3295) Nov 21 11:49:54 am62xx lldpad[708]: evb_ifup:eth0 agent 2 added Nov 21 11:49:54 am62xx lldpad[708]: evb22_ifup:eth0 agent 2 called Nov 21 11:49:54 am62xx lldpad[708]: evb22_init_tlv:eth0 agent 2 EVB tx is currently disabled Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_string:eth0 agent 2 loading EVB policy for evbmode failed, using default (2) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_evbmode:eth0 agent 2 policy evbmode station(0x2) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth0 agent 2 loading EVB policy for vdprwd failed, using default (20) Nov 21 11:49:54 am62xx lldpad[708]: exponent:eth0 agent 2 policy vdprwd 20 Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth0 agent 2 loading EVB policy for evbrrreq failed, using default (0) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_rrreq:eth0 agent 2 policy evbrrreq false Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth0 agent 2 loading EVB policy for evbgpid failed, using default (0) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_gid:eth0 agent 2 policy evbgpid false Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth0 agent 2 loading EVB policy for ecpretries failed, using default (3) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_retries:eth0 agent 2 policy ecpretries 3 Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth0 agent 2 loading EVB policy for ecprte failed, using default (8) Nov 21 11:49:54 am62xx lldpad[708]: exponent:eth0 agent 2 policy ecprte 8 Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth0 agent 2 loading EVB policy for vdprka failed, using default (20) Nov 21 11:49:54 am62xx lldpad[708]: exponent:eth0 agent 2 policy vdprka 20 Nov 21 11:49:54 am62xx lldpad[708]: evb22_ifup:eth0 agent 2 added Nov 21 11:49:54 am62xx lldpad[708]: init_ports: calling ifup for agent 0xaaaade68e320. Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:49:54 am62xx lldpad[708]: mand_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:49:54 am62xx lldpad[708]: med_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: ieee8023_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: init_ports: calling ifup for agent 0xaaaade68e250. Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:49:54 am62xx lldpad[708]: mand_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:49:54 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:49:54 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:49:54 am62xx lldpad[708]: med_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: ieee8023_ifup:port eth0 added Nov 21 11:49:54 am62xx lldpad[708]: get_dcbx_hw: eth0: nlmsg_find_attr failed, no GDCBX support Nov 21 11:49:54 am62xx lldpad[708]: eth1 mac:70:ff:76:1d:8d:c4 perm:70:ff:76:1d:8d:c4 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:54 am62xx lldpad[708]: eth1 MAC address is 70:ff:76:1d:8d:c4 Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: creating new agent for port eth1. Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: creating new agent for eth1 (01:80:C2:00:00:0E). Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: 0 agents on if eth1. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: creating new agent for port eth1. Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: creating new agent for eth1 (01:80:C2:00:00:03). Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: agent->adminStatus = disabled. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: 1 agents on if eth1. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: creating new agent for port eth1. Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: creating new agent for eth1 (01:80:C2:00:00:00). Nov 21 11:49:54 am62xx lldpad[708]: lldp_init_agent: agent->adminStatus = disabled. Nov 21 11:49:54 am62xx lldpad[708]: lldp_add_agent: 2 agents on if eth1. Nov 21 11:49:54 am62xx lldpad[708]: init_ports: calling ifup for agent 0xaaaade6943b0. Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: mand_bld_ttl_tlv:eth1:done:type=3 length=2 ttl=120 Nov 21 11:49:54 am62xx lldpad[708]: mand_ifup:port eth1 added Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth1:Port Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysname_tlv:eth1:System Name disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth1:System Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth1:System Capabilities disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth1:Management Address disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_ifup:port eth1 added Nov 21 11:49:54 am62xx lldpad[708]: med_bld_tlv:eth1:LLDP-MED is not enabled Nov 21 11:49:54 am62xx lldpad[708]: med_ifup:port eth1 added Nov 21 11:49:54 am62xx lldpad[708]: ieee8023_ifup:port eth1 added Nov 21 11:49:54 am62xx lldpad[708]: evb_ifup:eth1 agent 2 called Nov 21 11:49:54 am62xx lldpad[708]: evb_init_tlv:eth1 agent 2 EVB tx is currently disabled Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth1 agent 2 loading EVB policy for fmode failed, using default (128) Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth1 agent 2 loading EVB policy for capabilities failed, using default (0) Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth1 agent 2 loading EVB policy for rte failed, using default (15) Nov 21 11:49:54 am62xx lldpad[708]: evb_conf_string:eth1 agent 2 loading EVB policy for vsis failed, using default (3295) Nov 21 11:49:54 am62xx lldpad[708]: evb_ifup:eth1 agent 2 added Nov 21 11:49:54 am62xx lldpad[708]: evb22_ifup:eth1 agent 2 called Nov 21 11:49:54 am62xx lldpad[708]: evb22_init_tlv:eth1 agent 2 EVB tx is currently disabled Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_string:eth1 agent 2 loading EVB policy for evbmode failed, using default (2) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_evbmode:eth1 agent 2 policy evbmode station(0x2) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth1 agent 2 loading EVB policy for vdprwd failed, using default (20) Nov 21 11:49:54 am62xx lldpad[708]: exponent:eth1 agent 2 policy vdprwd 20 Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth1 agent 2 loading EVB policy for evbrrreq failed, using default (0) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_rrreq:eth1 agent 2 policy evbrrreq false Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth1 agent 2 loading EVB policy for evbgpid failed, using default (0) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_gid:eth1 agent 2 policy evbgpid false Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth1 agent 2 loading EVB policy for ecpretries failed, using default (3) Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_retries:eth1 agent 2 policy ecpretries 3 Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth1 agent 2 loading EVB policy for ecprte failed, using default (8) Nov 21 11:49:54 am62xx lldpad[708]: exponent:eth1 agent 2 policy ecprte 8 Nov 21 11:49:54 am62xx lldpad[708]: evb22_conf_int:eth1 agent 2 loading EVB policy for vdprka failed, using default (20) Nov 21 11:49:54 am62xx lldpad[708]: exponent:eth1 agent 2 policy vdprka 20 Nov 21 11:49:54 am62xx lldpad[708]: evb22_ifup:eth1 agent 2 added Nov 21 11:49:54 am62xx lldpad[708]: init_ports: calling ifup for agent 0xaaaade6942e0. Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:54 am62xx lldpad[708]: mand_bld_ttl_tlv:eth1:done:type=3 length=2 ttl=120 Nov 21 11:49:54 am62xx lldpad[708]: mand_ifup:port eth1 added Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth1:Port Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysname_tlv:eth1:System Name disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth1:System Description disabled Nov 21 11:49:54 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth1:System Capabilities disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth1:Management Address disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: med_bld_tlv:eth1:LLDP-MED is not enabled Nov 21 11:49:55 am62xx lldpad[708]: med_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: ieee8023_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: init_ports: calling ifup for agent 0xaaaade694210. Nov 21 11:49:55 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:55 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:55 am62xx lldpad[708]: mand_bld_ttl_tlv:eth1:done:type=3 length=2 ttl=120 Nov 21 11:49:55 am62xx lldpad[708]: mand_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth1:Port Description disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_sysname_tlv:eth1:System Name disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth1:System Description disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth1:System Capabilities disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth1:Management Address disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:49:55 am62xx lldpad[708]: Adapter eth1 does not support DCB. Nov 21 11:49:55 am62xx lldpad[708]: med_bld_tlv:eth1:LLDP-MED is not enabled Nov 21 11:49:55 am62xx lldpad[708]: med_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: ieee8023_ifup:port eth1 added Nov 21 11:49:55 am62xx lldpad[708]: get_dcbx_hw: eth1: nlmsg_find_attr failed, no GDCBX support Nov 21 11:49:55 am62xx lldpad[708]: eth2 mac:70:ff:76:1d:8d:c5 perm:70:ff:76:1d:8d:c5 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:55 am62xx lldpad[708]: eth2 MAC address is 70:ff:76:1d:8d:c5 Nov 21 11:49:55 am62xx lldpad[708]: eth3 mac:70:ff:76:1d:8d:c6 perm:70:ff:76:1d:8d:c6 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:55 am62xx lldpad[708]: eth3 MAC address is 70:ff:76:1d:8d:c6 Nov 21 11:49:55 am62xx lldpad[708]: eth4 mac:70:ff:76:1d:8d:c7 perm:70:ff:76:1d:8d:c7 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:55 am62xx lldpad[708]: eth4 MAC address is 70:ff:76:1d:8d:c7 Nov 21 11:49:55 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:55 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:55 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:55 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:49:55 am62xx lldpad[708]: evb22_start_modules:eth1 START role:2 Nov 21 11:49:55 am62xx lldpad[708]: ecp22_start:eth1 start ecp Nov 21 11:49:55 am62xx lldpad[708]: eth1 mac:70:ff:76:1d:8d:c4 perm:70:ff:76:1d:8d:c4 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:55 am62xx lldpad[708]: eth1 MAC address is 70:ff:76:1d:8d:c4 Nov 21 11:49:55 am62xx lldpad[708]: ecp22_create:eth1 create ecp data Nov 21 11:49:55 am62xx lldpad[708]: ecp22_set_rx_state:eth1 state ECP22_RX_BEGIN Nov 21 11:49:55 am62xx lldpad[708]: ecp22_rx_change_state:eth1 state change ECP22_RX_BEGIN -> ECP22_RX_WAIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_es_wait:eth1 state ECP22_RX_WAIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_set_rx_state:eth1 state ECP22_RX_WAIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_change_state:eth1 state change ECP22_TX_BEGIN -> ECP22_TX_INIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_run_sm:eth1 state ECP22_TX_INIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_change_state:eth1 state change ECP22_TX_INIT -> ECP22_TX_WAIT_FORREQ Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_run_sm:eth1 state ECP22_TX_WAIT_FORREQ Nov 21 11:49:55 am62xx lldpad[708]: ecp22_es_waitforreq:eth1 seqno 0x1 Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_change_state:eth1 state change ECP22_TX_WAIT_FORREQ -> ECP22_TX_WAIT_ONDATA Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_run_sm:eth1 state ECP22_TX_WAIT_ONDATA Nov 21 11:49:55 am62xx lldpad[708]: vdp22_start:eth1 start vdp Nov 21 11:49:55 am62xx lldpad[708]: vdp22_create:eth1 role:2 Nov 21 11:49:55 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth1 mac 01:80:C2:00:00:0E type 0. Nov 21 11:49:55 am62xx lldpad[708]: mand_bld_ttl_tlv:eth1:done:type=3 length=2 ttl=120 Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth1:Port Description disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_sysname_tlv:eth1:System Name disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth1:System Description disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth1:System Capabilities disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth1:Management Address disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_gettlv:eth1: failed Nov 21 11:49:55 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:49:55 am62xx lldpad[708]: Adapter eth1 does not support DCB. Nov 21 11:49:55 am62xx lldpad[708]: config.c: eth1 dcb mode is OFF. Nov 21 11:49:55 am62xx lldpad[708]: med_bld_tlv:eth1:LLDP-MED is not enabled Nov 21 11:49:55 am62xx lldpad[708]: med_gettlv:eth1: failed Nov 21 11:49:55 am62xx lldpad[708]: evb22_start_modules:eth0 START role:2 Nov 21 11:49:55 am62xx lldpad[708]: ecp22_start:eth0 start ecp Nov 21 11:49:55 am62xx lldpad[708]: eth0 mac:78:db:2f:e5:74:d3 perm:78:db:2f:e5:74:d3 san:ff:ff:ff:ff:ff:ff Nov 21 11:49:55 am62xx lldpad[708]: eth0 MAC address is 78:db:2f:e5:74:d3 Nov 21 11:49:55 am62xx lldpad[708]: ecp22_create:eth0 create ecp data Nov 21 11:49:55 am62xx lldpad[708]: ecp22_set_rx_state:eth0 state ECP22_RX_BEGIN Nov 21 11:49:55 am62xx lldpad[708]: ecp22_rx_change_state:eth0 state change ECP22_RX_BEGIN -> ECP22_RX_WAIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_es_wait:eth0 state ECP22_RX_WAIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_set_rx_state:eth0 state ECP22_RX_WAIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_change_state:eth0 state change ECP22_TX_BEGIN -> ECP22_TX_INIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_run_sm:eth0 state ECP22_TX_INIT Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_change_state:eth0 state change ECP22_TX_INIT -> ECP22_TX_WAIT_FORREQ Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_run_sm:eth0 state ECP22_TX_WAIT_FORREQ Nov 21 11:49:55 am62xx lldpad[708]: ecp22_es_waitforreq:eth0 seqno 0x1 Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_change_state:eth0 state change ECP22_TX_WAIT_FORREQ -> ECP22_TX_WAIT_ONDATA Nov 21 11:49:55 am62xx lldpad[708]: ecp22_tx_run_sm:eth0 state ECP22_TX_WAIT_ONDATA Nov 21 11:49:55 am62xx lldpad[708]: vdp22_start:eth0 start vdp Nov 21 11:49:55 am62xx lldpad[708]: vdp22_create:eth0 role:2 Nov 21 11:49:55 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:49:55 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:49:55 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:49:55 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:49:55 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:49:55 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner preemption capability supported Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner preemption capability not enabled Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner preemption capability not active Nov 21 11:50:02 am62xx lldpad[708]: eth0: Link partner minimum fragment size: 124 octets Nov 21 11:50:02 am62xx lldpad[708]: eth0: initiating MM verification with a retry interval of 134 ms... Nov 21 11:50:02 am62xx lldpad[708]: ethtool: kernel reports: integer out of range Nov 21 11:50:02 am62xx lldpad[708]: rxProcessFrame: allocated TLV 0 was not stored! 0xaaaade698510 Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:02 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:02 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:02 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:50:02 am62xx lldpad[708]: arg_path "tlvid00120f07.addFragSize" Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:02 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:02 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:02 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:02 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:02 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:02 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:50:02 am62xx lldpad[708]: arg_path "tlvid00120f07.addFragSize" Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:02 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:02 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:02 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:02 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:02 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:02 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:50:02 am62xx lldpad[708]: arg_path "tlvid00120f07.addFragSize" Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:02 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:02 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:02 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:02 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:02 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:02 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:02 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. # Warning: Stopping lldpad.service, but it can still be activated by: # lldpad.socket # TEST: LLDP [FAIL] # eth0 pMAC TX is not active [ 223.838009] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down # Error: Cannot delete qdisc with handle of zero. not ok 1 selftests: net/forwarding: ethtool_mm.sh # exit=1 root@am62xx:~/kselftest# Nov 21 11:50:05 am62xx systemd[1]: Stopping lldpad.service - Link Layer Discovery Protocol Agent Daemon.... Nov 21 11:50:05 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:05 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: set_config_setting(577): Nov 21 11:50:05 am62xx lldpad[708]: arg_path "tlvid00120f07.addFragSize" Nov 21 11:50:05 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:05 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:05 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: eth0: Configured addFragSize (0) smaller than the minimum value requested by kernel (1). Using the latter Nov 21 11:50:05 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:05 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:05 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: eth0: Configured addFragSize (0) smaller than the minimum value requested by kernel (1). Using the latter Nov 21 11:50:05 am62xx lldpad[708]: mibConstrInfoLLDPDU: port eth0 mac 01:80:C2:00:00:0E type 0. Nov 21 11:50:05 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_portdesc_tlv:eth0:Port Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysname_tlv:eth0:System Name disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_sysdesc_tlv:eth0:System Description disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_syscaps_tlv:eth0:System Capabilities disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_bld_manaddr_tlv:eth0:Management Address disabled Nov 21 11:50:05 am62xx lldpad[708]: basman_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: med_bld_tlv:eth0:LLDP-MED is not enabled Nov 21 11:50:05 am62xx lldpad[708]: med_gettlv:eth0: failed Nov 21 11:50:05 am62xx lldpad[708]: eth0: Configured addFragSize (0) smaller than the minimum value requested by kernel (1). Using the latter Nov 21 11:50:05 am62xx lldpad[708]: Signal 15 received - terminating Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth4 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth4 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: Send shutdown frame on port eth4 Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth3 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth3 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: Send shutdown frame on port eth3 Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth2 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth2 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: Send shutdown frame on port eth2 Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth1 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth1 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: Send shutdown frame on port eth1 Nov 21 11:50:05 am62xx lldpad[708]: mibConstrShutdownLLDPDU: mac 01:80:C2:00:00:0E. Nov 21 11:50:05 am62xx lldpad[708]: mand_bld_ttl_tlv:eth1:done:type=3 length=2 ttl=120 Nov 21 11:50:05 am62xx lldpad[708]: send_msg: sendto = 32 Nov 21 11:50:05 am62xx lldpad[708]: Adapter eth0 does not support DCB. Nov 21 11:50:05 am62xx lldpad[708]: config.c: eth0 dcb mode is OFF. Nov 21 11:50:05 am62xx lldpad[708]: Send shutdown frame on port eth0 Nov 21 11:50:05 am62xx lldpad[708]: mibConstrShutdownLLDPDU: mac 01:80:C2:00:00:0E. Nov 21 11:50:05 am62xx lldpad[708]: mand_bld_ttl_tlv:eth0:done:type=3 length=2 ttl=120 Nov 21 11:50:05 am62xx lldpad[708]: mand_unregister:done Nov 21 11:50:05 am62xx lldpad[708]: basman_unregister:done Nov 21 1[ 224.608232] am65-cpsw-nuss c000000.ethernet eth1: Link is Down 1:50:05 am62xx lldpad[708]: dcbx_unregister: unregister dcbx complete. Nov 21 11:50:05 am62xx lldpad[708]: med_unregister:done Nov 21 11:50:05 am62xx lldpad[708]: ieee8023_unregister:done Nov 21 11:50:05 am62xx lldpad[708]: evb_unregister:done Nov 21 11:50:05 am62xx lldpad[708]: evb22_unregister:done Nov 21 11:50:05 am62xx lldpad[708]: vdp_unregister: done Nov 21 11:50:05 am62xx lldpad[708]: vdp22_unregister:done Nov 21 11:50:05 am62xx lldpad[708]: ecp22_remove:eth0 remove ecp Nov 21 11:50:05 am62xx lldpad[708]: ecp22_remove:eth1 remove ecp Nov 21 11:50:05 am62xx lldpad[708]: ecp22_unregister: done Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth4 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth4 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth3 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth3 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth2 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth2 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth1 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth1 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth0 Nov 21 11:50:05 am62xx lldpad[708]: In remove_port: Found port eth0 Nov 21 11:50:05 am62xx systemd[1]: lldpad.service: Deactivated successfully. Nov 21 11:50:05 am62xx systemd[1]: Stopped lldpad.service - Link Layer Discovery Protocol Agent Daemon..