Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756679AbXK3UNp (ORCPT ); Fri, 30 Nov 2007 15:13:45 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752357AbXK3UNh (ORCPT ); Fri, 30 Nov 2007 15:13:37 -0500 Received: from smtp-105-friday.noc.nerim.net ([62.4.17.105]:3293 "EHLO mallaury.nerim.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751409AbXK3UNg convert rfc822-to-8bit (ORCPT ); Fri, 30 Nov 2007 15:13:36 -0500 Date: Fri, 30 Nov 2007 21:13:32 +0100 From: Jean Delvare To: David Brownell Cc: Linux Kernel list , Felipe Balbi , Bill Gatliff , Haavard Skinnemoen , Andrew Victor , Tony Lindgren , "eric miao" , Kevin Hilman , Paul Mundt , Ben Dooks Subject: Re: [patch/rfc 2/4] pcf875x I2C GPIO expander driver Message-ID: <20071130211332.49a21a6b@hyperion.delvare> In-Reply-To: <200711301040.54777.david-b@pacbell.net> References: <200710291809.29936.david-b@pacbell.net> <200710291851.49057.david-b@pacbell.net> <20071130133256.72385ea8@hyperion.delvare> <200711301040.54777.david-b@pacbell.net> X-Mailer: Sylpheed-Claws 2.5.5 (GTK+ 2.10.6; x86_64-suse-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6375 Lines: 152 Hi David, On Fri, 30 Nov 2007 10:40:54 -0800, David Brownell wrote: > On Friday 30 November 2007, Jean Delvare wrote: > > > --- a/drivers/i2c/chips/Kconfig 2007-10-28 21:04:06.000000000 -0700 > > > +++ b/drivers/i2c/chips/Kconfig 2007-10-29 14:16:01.000000000 -0700 > > > @@ -51,6 +51,24 @@ config SENSORS_EEPROM > > > This driver can also be built as a module. If so, the module > > > will be called eeprom. > > > > > > +config GPIO_PCF857X > > > + tristate "PCF875x GPIO expanders" > > > + depends on GPIO_LIB > > > + help > > > + ... > > > + > > > + This driver provides only an in-kernel interface to those GPIOs. > > > + Any sysfs interface to userspace would be provided separately. > > > > How? > > I'll take that out, to avoid the question. The answer is still mostly > TBD, but the gpiolib infrastructure provides a number of the hooks > that such a userspace interface would need. So the user-space interface would be part of the generic GPIO infrastructure? I like the idea. > > > +/** > > > + * struct pcf857x_platform_data - data to set up pcf857x driver > > > + * @gpio_base: number of the chip's first GPIO > > > + * @n_latch: optional bit-inverse of initial output state > > > > Strange name, and I can't make much sense of the description either. > > Updated description: > > * @n_latch: optional bit-inverse of initial register value; if > * you leave this initialized to zero, the driver will treat > * all bits as inputs as if the chip was just reset > > This chip is documented as being "pseudo-bidirectional", which is > a sign that there are some confusing mechanisms lurking... > > > Conventions for naming negative-true signals include a "#" suffix > (illegal for C), a overbar (not expressible in ASCII), and prefixes > including "/" (illegal for C) and "n" (aha!). I morphed the latter > into "n_" since it's often paired with all-caps signal names, as > in "nRESET", which are bad kernel coding style. > > Latches hold values; http://en.wikipedia.org/wiki/Latch_%28electronics%29 > talks about bit-level latching, but GPIO controllers use register-wide > latches to record the value that should be driven on output pins. > (As opposed to input pins, whose values are read without latching.) > > > > After reading this paragraph I still have no idea what n_latch does. > > But maybe that's just me. > > It's a wierd little arrangement, maybe you have a better explanation. > I tried hitting the confusing points more directly: > > * These GPIO chips are only "pseudo-bidirectional"; read the chip specs > * to understand the behavior. They don't have separate registers to > * record which pins are used for input or output, record which output > * values are driven, or provide access to input values. That must all > * be inferred by reading the chip's value and knowing the last value > * written to it. If you don't initialize n_latch, that last written > * value is presumed to be all ones (as if the chip were just reset). Much clearer now, thanks. I know what a latch is, I just couldn't get how latching (or lack thereof) was related with an initial register value. With the explanation above, I get it. > > > --- a/drivers/i2c/chips/Makefile 2007-10-28 21:04:06.000000000 -0700 > > > +++ b/drivers/i2c/chips/Makefile 2007-10-28 21:09:49.000000000 -0700 > > > @@ -11,6 +11,7 @@ obj-$(CONFIG_SENSORS_M41T00) += m41t00.o > > > obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o > > > obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o > > > obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o > > > +obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o > > > > For alphabetical order, it would go one line above. > > For alphabetical order it would go much sooner. > GPIO precedes SENSOR. ;) We apply the alphabetical order to driver names, not configuration symbols, as far as I know. Though for most directories it probably doesn't make a difference; drivers/i2c/chips is admittedly a bit messy in this respect. Note that at some point I will attempt to get rid of the "SENSORS" part of configuration options that have nothing to do with sensors, that should help a bit. > > > +#include > > > > I suspect that there will be many more such header files in the future. > > Would it make sense to move them to include/linux/gpio? > > I was thinking more like myself. There are many more > I2C chips than GPIO expanders. But most i2c chip drivers don't need a header file. Or is this going to change with the new-style i2c drivers? Along the same line, I am wondering if it would make sense to put the various GPIO drivers in drivers/gpio. It's a much better practice to group the drivers according to the functionality they provide than the way they are connected to the system. drivers/i2c/chips is an exception in this respect, it's meant for i2c drivers that have no obvious place to live in. That's why there aren't many drivers there, and I hope it will stay this way. In an ideal world we could even get rid of this directory and move the remaining drivers to drivers/misc. > > > +static int pcf857x_output8(struct gpio_chip *chip, unsigned offset, int value) > > > + ... > > > + > > > +static void pcf857x_set8(struct gpio_chip *chip, unsigned offset, int value) > > > +{ > > > + pcf857x_output8(chip, offset, value); > > > +} > > > > It would be more efficient to drop pcf857x_set8 altogether and do > > gpio->chip.set = pcf857x_output8. > > No can do; return types differ, which means that on some platforms > the calling conventions have significant differences. Ah, right, sorry for missing that. I had only looked at the parameters and forgot the return type. > > > +?????????????????????dev_err(&client->dev, "%s --> %d\n", > > > +?????????????????????????????????????"teardown", status); > > > > Why %s instead of hard-coding "teardown"? > > To share (current code) three copies of the "<3>%s %s: %s --> %d\n" > string. Every little bit of kernel bloat prevention helps. ;) Only two copies in the version you posted, but indeed there would be three if the trick was applied consistently. -- Jean Delvare - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/