Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) client-ip=23.128.96.31;
From:   Maxime Chevallier <maxime.chevallier@bootlin.com>
To:     davem@davemloft.net
Cc:     Maxime Chevallier <maxime.chevallier@bootlin.com>,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        thomas.petazzoni@bootlin.com, Andrew Lunn <andrew@lunn.ch>,
        Jakub Kicinski <kuba@kernel.org>,
        Eric Dumazet <edumazet@google.com>,
        Paolo Abeni <pabeni@redhat.com>,
        Russell King <linux@armlinux.org.uk>,
        linux-arm-kernel@lists.infradead.org,
        Christophe Leroy <christophe.leroy@csgroup.eu>,
        Herve Codina <herve.codina@bootlin.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Vladimir Oltean <vladimir.oltean@nxp.com>,
        =?UTF-8?q?K=C3=B6ry=20Maincent?= <kory.maincent@bootlin.com>,
        Jesse Brandeburg <jesse.brandeburg@intel.com>,
        Jonathan Corbet <corbet@lwn.net>,
        =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>,
        Piergiorgio Beruto <piergiorgio.beruto@gmail.com>,
        Oleksij Rempel <o.rempel@pengutronix.de>,
        =?UTF-8?q?Nicol=C3=B2=20Veronese?= <nicveronese@gmail.com>
Subject: [RFC PATCH net-next v3 09/13] net: ethtool: plca: Target the command to the requested PHY
Date:   Fri,  1 Dec 2023 17:36:59 +0100
Message-ID: <20231201163704.1306431-10-maxime.chevallier@bootlin.com>
In-Reply-To: <20231201163704.1306431-1-maxime.chevallier@bootlin.com>
References: <20231201163704.1306431-1-maxime.chevallier@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V3: No changes
V2: New patch

 net/ethtool/plca.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index b1e2e3b5027f..2b3e419f4dc2 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_cfg, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_cfg));
 
-	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+	ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg);
 	ethnl_ops_complete(dev);
 
 out:
@@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 static int
 ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	const struct ethtool_phy_ops *ops;
 	struct nlattr **tb = info->attrs;
 	struct phy_plca_cfg plca_cfg;
@@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev)
+	if (!req_info->phydev)
 		return -EOPNOTSUPP;
 
 	ops = ethtool_phy_ops;
@@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	if (!mod)
 		return 0;
 
-	ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
+	ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack);
 	return ret < 0 ? ret : 1;
 }
 
@@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_st, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_st));
 
-	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+	ret = ops->get_plca_status(req_base->phydev, &data->plca_st);
 	ethnl_ops_complete(dev);
 out:
 	return ret;
-- 
2.42.0