Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.36 as permitted sender) client-ip=23.128.96.36;
MIME-Version: 1.0
References: <20231120070024.4079344-1-claudiu.beznea.uj@bp.renesas.com> <20231120070024.4079344-7-claudiu.beznea.uj@bp.renesas.com>
In-Reply-To: <20231120070024.4079344-7-claudiu.beznea.uj@bp.renesas.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Fri, 1 Dec 2023 17:51:23 +0100
Message-ID: <CAMuHMdU6-jHrT6DjFkwHoBytOzT=E9=dujWBq0v++ow4CJW==g@mail.gmail.com>
Subject: Re: [PATCH 06/14] pinctrl: renesas: rzg2l: Add pin configuration
 support for pinmux groups
To:     Claudiu <claudiu.beznea@tuxon.dev>
Cc:     s.shtylyov@omp.ru, davem@davemloft.net, edumazet@google.com,
        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linux@armlinux.org.uk, magnus.damm@gmail.com,
        mturquette@baylibre.com, sboyd@kernel.org,
        linus.walleij@linaro.org, p.zabel@pengutronix.de, arnd@arndb.de,
        m.szyprowski@samsung.com, alexandre.torgue@foss.st.com, afd@ti.com,
        broonie@kernel.org, alexander.stein@ew.tq-group.com,
        eugen.hristev@collabora.com, sergei.shtylyov@gmail.com,
        prabhakar.mahadev-lad.rj@bp.renesas.com,
        biju.das.jz@bp.renesas.com, linux-renesas-soc@vger.kernel.org,
        netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
        Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Hi Claudiu,

On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> On RZ/G3S different Ethernet pins needs to be configured with different
> settings (e.g. power-source need to be set, RGMII TXC, TX_CTL pins need
> output-enable). Commit adjust driver to allow specifying pin configuration
> for pinmux groups. With this DT settings like the following are taken
> into account by driver:
>
> eth0_pins: eth0 {
>         tx_ctl {
>                 pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* ET0_TX_CTL */
>                 power-source = <1800>;
>                 output-enable;
>                 drive-strength-microamp = <5200>;
>         };
> };
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -376,8 +376,11 @@ static int rzg2l_dt_subnode_to_map(struct pinctrl_dev *pctldev,
>                 goto done;
>         }
>
> -       if (num_pinmux)
> +       if (num_pinmux) {
>                 nmaps += 1;
> +               if (num_configs)
> +                       nmaps += 1;

I think this would be more readable, and better follow the style of
the surrounding statements, if this new check would not be nested
under the num_pinmux check.

> +       }
>
>         if (num_pins)
>                 nmaps += num_pins;

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds