Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
Reply-To: Sean Christopherson <seanjc@google.com>
Date:   Fri,  1 Dec 2023 16:04:09 -0800
In-Reply-To: <20231202000417.922113-1-seanjc@google.com>
Mime-Version: 1.0
References: <20231202000417.922113-1-seanjc@google.com>
Message-ID: <20231202000417.922113-21-seanjc@google.com>
Subject: [PATCH v9 20/28] KVM: selftests: Expand PMU counters test to verify
 LLC events
From:   Sean Christopherson <seanjc@google.com>
To:     Sean Christopherson <seanjc@google.com>,
        Paolo Bonzini <pbonzini@redhat.com>
Cc:     kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
        Kan Liang <kan.liang@linux.intel.com>,
        Dapeng Mi <dapeng1.mi@linux.intel.com>,
        Jim Mattson <jmattson@google.com>,
        Jinrong Liang <cloudliang@tencent.com>,
        Aaron Lewis <aaronlewis@google.com>,
        Like Xu <likexu@tencent.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Expand the PMU counters test to verify that LLC references and misses have
non-zero counts when the code being executed while the LLC event(s) is
active is evicted via CFLUSH{,OPT}.  Note, CLFLUSH{,OPT} requires a fence
of some kind to ensure the cache lines are flushed before execution
continues.  Use MFENCE for simplicity (performance is not a concern).

Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 .../selftests/kvm/x86_64/pmu_counters_test.c  | 59 +++++++++++++------
 1 file changed, 40 insertions(+), 19 deletions(-)

diff --git a/tools/testing/selftests/kvm/x86_64/pmu_counters_test.c b/tools/testing/selftests/kvm/x86_64/pmu_counters_test.c
index f5dedd112471..4c7133ddcda8 100644
--- a/tools/testing/selftests/kvm/x86_64/pmu_counters_test.c
+++ b/tools/testing/selftests/kvm/x86_64/pmu_counters_test.c
@@ -14,9 +14,9 @@
 /*
  * Number of "extra" instructions that will be counted, i.e. the number of
  * instructions that are needed to set up the loop and then disabled the
- * counter.  2 MOV, 2 XOR, 1 WRMSR.
+ * counter.  1 CLFLUSH/CLFLUSHOPT/NOP, 1 MFENCE, 2 MOV, 2 XOR, 1 WRMSR.
  */
-#define NUM_EXTRA_INSNS		5
+#define NUM_EXTRA_INSNS		7
 #define NUM_INSNS_RETIRED	(NUM_BRANCHES + NUM_EXTRA_INSNS)
 
 static uint8_t kvm_pmu_version;
@@ -107,6 +107,12 @@ static void guest_assert_event_count(uint8_t idx,
 	case INTEL_ARCH_BRANCHES_RETIRED_INDEX:
 		GUEST_ASSERT_EQ(count, NUM_BRANCHES);
 		break;
+	case INTEL_ARCH_LLC_REFERENCES_INDEX:
+	case INTEL_ARCH_LLC_MISSES_INDEX:
+		if (!this_cpu_has(X86_FEATURE_CLFLUSHOPT) &&
+		    !this_cpu_has(X86_FEATURE_CLFLUSH))
+			break;
+		fallthrough;
 	case INTEL_ARCH_CPU_CYCLES_INDEX:
 	case INTEL_ARCH_REFERENCE_CYCLES_INDEX:
 		GUEST_ASSERT_NE(count, 0);
@@ -123,29 +129,44 @@ static void guest_assert_event_count(uint8_t idx,
 	GUEST_ASSERT_EQ(_rdpmc(pmc), 0xdead);
 }
 
+/*
+ * Enable and disable the PMC in a monolithic asm blob to ensure that the
+ * compiler can't insert _any_ code into the measured sequence.  Note, ECX
+ * doesn't need to be clobbered as the input value, @pmc_msr, is restored
+ * before the end of the sequence.
+ *
+ * If CLFUSH{,OPT} is supported, flush the cacheline containing (at least) the
+ * start of the loop to force LLC references and misses, i.e. to allow testing
+ * that those events actually count.
+ */
+#define GUEST_MEASURE_EVENT(_msr, _value, clflush)				\
+do {										\
+	__asm__ __volatile__("wrmsr\n\t"					\
+			     clflush "\n\t"					\
+			     "mfence\n\t"					\
+			     "1: mov $" __stringify(NUM_BRANCHES) ", %%ecx\n\t"	\
+			     "loop .\n\t"					\
+			     "mov %%edi, %%ecx\n\t"				\
+			     "xor %%eax, %%eax\n\t"				\
+			     "xor %%edx, %%edx\n\t"				\
+			     "wrmsr\n\t"					\
+			     :: "a"((uint32_t)_value), "d"(_value >> 32),	\
+				"c"(_msr), "D"(_msr)				\
+	);									\
+} while (0)
+
 static void __guest_test_arch_event(uint8_t idx, struct kvm_x86_pmu_feature event,
 				    uint32_t pmc, uint32_t pmc_msr,
 				    uint32_t ctrl_msr, uint64_t ctrl_msr_value)
 {
 	wrmsr(pmc_msr, 0);
 
-	/*
-	 * Enable and disable the PMC in a monolithic asm blob to ensure that
-	 * the compiler can't insert _any_ code into the measured sequence.
-	 * Note, ECX doesn't need to be clobbered as the input value, @pmc_msr,
-	 * is restored before the end of the sequence.
-	 */
-	__asm__ __volatile__("wrmsr\n\t"
-			     "mov $" __stringify(NUM_BRANCHES) ", %%ecx\n\t"
-			     "loop .\n\t"
-			     "mov %%edi, %%ecx\n\t"
-			     "xor %%eax, %%eax\n\t"
-			     "xor %%edx, %%edx\n\t"
-			     "wrmsr\n\t"
-			     :: "a"((uint32_t)ctrl_msr_value),
-				"d"(ctrl_msr_value >> 32),
-				"c"(ctrl_msr), "D"(ctrl_msr)
-			     );
+	if (this_cpu_has(X86_FEATURE_CLFLUSHOPT))
+		GUEST_MEASURE_EVENT(ctrl_msr, ctrl_msr_value, "clflushopt 1f");
+	else if (this_cpu_has(X86_FEATURE_CLFLUSH))
+		GUEST_MEASURE_EVENT(ctrl_msr, ctrl_msr_value, "clflush 1f");
+	else
+		GUEST_MEASURE_EVENT(ctrl_msr, ctrl_msr_value, "nop");
 
 	guest_assert_event_count(idx, event, pmc, pmc_msr);
 }
-- 
2.43.0.rc2.451.g8631bc7472-goog