Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:1 as permitted sender) client-ip=2620:137:e000::3:1;
From:   Tsung-Han Lin <tsunghan.tw@gmail.com>
Cc:     tsunghan.tw@gmail.com, Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will@kernel.org>,
        Jonathan Corbet <corbet@lwn.net>,
        linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH] Dcoumentation/arch/arm64: fix typo
Date:   Sun,  3 Dec 2023 09:18:04 +0800
Message-Id: <20231203011804.27694-1-tsunghan.tw@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

Should be 'if' here.

Signed-off-by: Tsung-Han Lin <tsunghan.tw@gmail.com>
---
 Documentation/arch/arm64/arm-acpi.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/arch/arm64/arm-acpi.rst b/Documentation/arch/arm64/arm-acpi.rst
index a46c34fa9604..e59e4505d0d9 100644
--- a/Documentation/arch/arm64/arm-acpi.rst
+++ b/Documentation/arch/arm64/arm-acpi.rst
@@ -130,7 +130,7 @@ When an Arm system boots, it can either have DT information, ACPI tables,
 or in some very unusual cases, both.  If no command line parameters are used,
 the kernel will try to use DT for device enumeration; if there is no DT
 present, the kernel will try to use ACPI tables, but only if they are present.
-In neither is available, the kernel will not boot.  If acpi=force is used
+If neither is available, the kernel will not boot.  If acpi=force is used
 on the command line, the kernel will attempt to use ACPI tables first, but
 fall back to DT if there are no ACPI tables present.  The basic idea is that
 the kernel will not fail to boot unless it absolutely has no other choice.
--
2.34.1