Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Haoran Liu <liuhaoran14@163.com>
To:     support.opensource@diasemi.com
Cc:     lee@kernel.org, linux-kernel@vger.kernel.org,
        Haoran Liu <liuhaoran14@163.com>
Subject: [PATCH] [mfd] da9052: Add error handling for spi_setup in da9052_spi_probe
Date:   Sat,  2 Dec 2023 21:21:25 -0800
Message-Id: <20231203052125.37334-1-liuhaoran14@163.com>
Precedence: bulk

This patch adds error handling for the spi_setup call. The need for this
error handling was identified through static analysis, which highlighted
the lack of proper handling for potential failures of spi_setup.
Previously, a failure in spi_setup could lead to unstable behavior of
the DA9052 device.

Although the error addressed by this patch may not occur in the current
environment, I still suggest implementing these error handling routines
if the function is not highly time-sensitive. As the environment evolves
or the code gets reused in different contexts, there's a possibility that
these errors might occur. In case you find this addition unnecessary, I
completely understand and respect your perspective. My intention was to
enhance the robustness of the code, but I acknowledge that practical
considerations and current functionality might not warrant this change
at this point.

Signed-off-by: Haoran Liu <liuhaoran14@163.com>
---
 drivers/mfd/da9052-spi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index be5f2b34e18a..c32d5025a18f 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -22,6 +22,7 @@ static int da9052_spi_probe(struct spi_device *spi)
 	int ret;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct da9052 *da9052;
+	int ret;
 
 	da9052 = devm_kzalloc(&spi->dev, sizeof(struct da9052), GFP_KERNEL);
 	if (!da9052)
@@ -29,7 +30,11 @@ static int da9052_spi_probe(struct spi_device *spi)
 
 	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
-	spi_setup(spi);
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", ret);
+		return ret;
+	}
 
 	da9052->dev = &spi->dev;
 	da9052->chip_irq = spi->irq;
-- 
2.17.1