Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.36 as permitted sender) client-ip=23.128.96.36;
MIME-Version: 1.0
References: <20231120070024.4079344-1-claudiu.beznea.uj@bp.renesas.com>
 <20231120070024.4079344-11-claudiu.beznea.uj@bp.renesas.com>
 <CAMuHMdW9Unpw7NQOGWd4SeFV8XgvRYTKTXnt9Tsagb3Q3U9tNA@mail.gmail.com>
 <96dd3f54-9560-4587-b4e8-bf75422ff5ef@tuxon.dev> <CAMuHMdWGbEhBdzK4Swu4uX05vX7H2Ow4uE1C=JVNOrdcbZYL=A@mail.gmail.com>
 <b3701927-e41a-44d8-8f91-da245b76f532@tuxon.dev>
In-Reply-To: <b3701927-e41a-44d8-8f91-da245b76f532@tuxon.dev>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Mon, 4 Dec 2023 10:00:03 +0100
Message-ID: <CAMuHMdVmD7-AUn91SaOq1iOMkcGhi0WNvx8bCX3oD+xa-Bt98g@mail.gmail.com>
Subject: Re: [PATCH 10/14] arm64: renesas: r9a08g045: Add Ethernet nodes
To:     claudiu beznea <claudiu.beznea@tuxon.dev>
Cc:     s.shtylyov@omp.ru, davem@davemloft.net, edumazet@google.com,
        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linux@armlinux.org.uk, magnus.damm@gmail.com,
        mturquette@baylibre.com, sboyd@kernel.org,
        linus.walleij@linaro.org, p.zabel@pengutronix.de, arnd@arndb.de,
        m.szyprowski@samsung.com, alexandre.torgue@foss.st.com, afd@ti.com,
        broonie@kernel.org, alexander.stein@ew.tq-group.com,
        eugen.hristev@collabora.com, sergei.shtylyov@gmail.com,
        prabhakar.mahadev-lad.rj@bp.renesas.com,
        biju.das.jz@bp.renesas.com, linux-renesas-soc@vger.kernel.org,
        netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
        Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Hi Claudiu,

On Mon, Dec 4, 2023 at 9:38 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote:
> On 04.12.2023 10:02, Geert Uytterhoeven wrote:
> > On Mon, Dec 4, 2023 at 8:41 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote:
> >> On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> >>> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> >>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>>
> >>>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
> >>>>
> >>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>
> >>> Thanks for your patch!
> >>>
> >>>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >>>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >>>> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
> >>>>                         status = "disabled";
> >>>>                 };
> >>>>
> >>>> +               eth0: ethernet@11c30000 {
> >>>> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
> >>>> +                       reg = <0 0x11c30000 0 0x10000>;
> >>>> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> >>>> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> >>>> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +                       interrupt-names = "mux", "fil", "arp_ns";
> >>>> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
> >>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
> >>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
> >>>> +                       clock-names = "axi", "chi", "refclk";
> >>>> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
> >>>> +                       power-domains = <&cpg>;
> >>>
> >>> Perhaps add a default phy mode, like on other SoCs?
> >>>
> >>>     phy-mode = "rgmii"';
> >>
> >> I skipped this (even it was available on the other SoCs) as I consider the
> >> phy-mode is board specific.
> >
> > IC.  Still, it's good to have some consistency across boards.
> >
> >>> Also missing:
> >>>
> >>>     #address-cells = <1>;
> >>>     #size-cells = <0>;
> >>
> >> Same for these.
> >
> > These are required, and always have the same values, so it makes more
> > sense to have them in the SoC .dtsi file, once.
>
> I remember I had a compilation warning with an Ethernet controller
> configured with fixed-link having #address-cells, #size-cells. With
> fixed-link these were not needed.

I think EtherAVB always use MDIO for management, so fixed-link is
not applicable.

> Anyway... I'll keep all in dtsi if you prefer it this way.

Yes please, thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds