Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:6 as permitted sender) client-ip=2620:137:e000::3:6;
From:   Kamel Bouhara <kamel.bouhara@bootlin.com>
To:     Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Henrik Rydberg <rydberg@bitmath.org>,
        linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, Marco Felsch <m.felsch@pengutronix.de>,
        Jeff LaBundy <jeff@labundy.com>
Cc:     catalin.popescu@leica-geosystems.com,
        mark.satterthwaite@touchnetix.com, bartp@baasheep.co.uk,
        hannah.rossiter@touchnetix.com,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Gregory Clement <gregory.clement@bootlin.com>,
        bsp-development.geo@leica-geosystems.com,
        Kamel Bouhara <kamel.bouhara@bootlin.com>
Subject: [PATCH v4 0/3] Input: Add TouchNetix axiom touchscreen driver
Date:   Mon,  4 Dec 2023 15:05:01 +0100
Message-ID: <20231204140505.2838916-1-kamel.bouhara@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add a new driver for the TouchNetix's axiom family of
touchscreen controller. This driver only support i2c
and can be later adapted for SPI and USB support.

---
Changes in v2:
 - Add device tree binding documentation
 - Move core functions in axiom_i2c as we only care about i2c support now
 - Use static function when required
 - Use syntax dev_err_probe()
 - Add an hardware based reset

Changes in v3:
 - Remove irq-gpios property in dt-binding
 - Use a generic node name
 - Fix issues reported in https://lore.kernel.org/oe-kbuild-all/202310100300.oAC2M62R-lkp@intel.com/

Changes in v4:
 - Cleanup unused headers and macros
 - Use standard kernel type
 - Namespace structures and functions
 - Use packed struct when possible to avoid bitfield operators
 - Fix missing break when address is found in axiom_populate_target_address()
 - Split reads in two steps for the reports, first length then report
   itself so we only read required bytes
 - Get poll-interval from devicetree
 - Add VDDI/VDDA regulators
 - Add a startup delay of 110 ms required after VDDA/VDDI is applied
 - Remove axiom_i2c_write() as it is no more used

Kamel Bouhara (3):
  dt-bindings: vendor-prefixes: Add TouchNetix AS
  dt-bindings: input: Add TouchNetix axiom touchscreen
  Input: Add TouchNetix axiom i2c touchscreen driver

 .../input/touchscreen/touchnetix,ax54a.yaml   |  56 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   7 +
 drivers/input/touchscreen/Kconfig             |  12 +
 drivers/input/touchscreen/Makefile            |   1 +
 drivers/input/touchscreen/touchnetix_axiom.c  | 675 ++++++++++++++++++
 6 files changed, 753 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml
 create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c

--
2.25.1