Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) client-ip=23.128.96.31;
From:   Luca Weiss <luca@z3ntu.xyz>
To:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Subject: Re: [PATCH 2/2] ARM: dts: qcom: msm8226: Add CPU and SAW/ACC nodes
Date:   Mon, 04 Dec 2023 19:38:37 +0100
Message-ID: <12332815.O9o76ZdvQC@z3ntu.xyz>
In-Reply-To: <d1f1ee82-7997-4e36-a21a-7b70d2db9746@linaro.org>
References: <20231203-msm8226-cpu-v1-0-d18e83340b32@z3ntu.xyz>
 <20231203-msm8226-cpu-v1-2-d18e83340b32@z3ntu.xyz>
 <d1f1ee82-7997-4e36-a21a-7b70d2db9746@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

On Montag, 4. Dezember 2023 11:41:36 CET Konrad Dybcio wrote:
> On 3.12.2023 23:38, Luca Weiss wrote:
> > From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> > 
> > Add CPU and SAW/ACC nodes to enable SMP on MSM8226.
> > 
> > Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> > [luca: update some nodes to fix dtbs_check errors, reorder, cleanup]
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> 
> Looks like L2 SAW (@ 0xf9012000) is missing.. but then it's present
> on 8974.. but it's not bound by any driver :)

Right, I had this node before:

	saw_l2: power-controller@f9012000 {
		compatible = "qcom,saw2";
		reg = <0xf9012000 0x1000>;
		regulator;
	};

And then used like this:

	L2: l2-cache {
		compatible = "cache";
		cache-level = <2>;
		qcom,saw = <&saw_l2>;
	};

I decided to remove it because first there's no "qcom,saw2" (without a second 
compatible) in the yaml. And qcom,saw property in the l2-cache node also 
wasn't accepted. Since I'm not aware of any driver code currently using this 
(and the bindings not being particularly maintained, there's still this bit in 
.txt form?) I decided to remove it to not knowingly introduce binding errors.

Regards
Luca

> 
> The nodes you added here look correct FWIW
> 
> Konrad