Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
From:   Garrett Giordano <ggiordano@phytec.com>
To:     nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        w.egorov@phytec.de
Cc:     linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, upstream@lists.phytec.de
Subject: [PATCH 2/3] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support
Date:   Mon,  4 Dec 2023 14:28:10 -0800
Message-Id: <20231204222811.2344460-2-ggiordano@phytec.com>
In-Reply-To: <20231204222811.2344460-1-ggiordano@phytec.com>
References: <20231204222811.2344460-1-ggiordano@phytec.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?MVkBZCDLoXVOS+kCDUQTzdVzGuIKAgKVsokmmj077gg7s+zS88hNYhntKXZF?=
 =?us-ascii?Q?fLo19HY0emL09Dlep8qz/6N6hjcU2z8LNbsyUYgUaaQ6jMQpWz5w1LHB4k69?=
 =?us-ascii?Q?dUqH7AzELiDOR5PQM40QG/zDUEAvhh1GP5nu1Aiw2ietlGKzJSZ0+v3EU9Vu?=
 =?us-ascii?Q?RHWdNBdzHbid2Enz72nG7SPws4zANGb8rAWGIyuHOnNdzjrKe592d81XEiLs?=
 =?us-ascii?Q?H8pUVZVPpClksMQU7LTAPCSPiuFDkHB9Syvb6LHFbfHMPqHEZgndAxOWrxKd?=
 =?us-ascii?Q?kU+iuBF2p6V6G+77l+NlcI0973zdH+EN9d0AeRuGyEGgb5mCcB1LI/gW9m7u?=
 =?us-ascii?Q?iAImymen/HWDGI2zG6V59+hAISmrNKkJPqvbA5R+zNuQsMjehe0XMlm4UjAa?=
 =?us-ascii?Q?dDArSFWA4vRVrS4iexYnqmWuAn7pGDbNqqSGPkyVoWpinQQePpUA0ilMzy5b?=
 =?us-ascii?Q?bwRDBQOZeZ7plxvMgaj69Ni52cTU6LAJ6enlGrbgC/P0yop7VP1lXqQ4scCJ?=
 =?us-ascii?Q?PI08/e8nbIpiJ+6oIeJz3XILAc5wADoE3RuTAIelxicmPsWJdaSin/630a4z?=
 =?us-ascii?Q?0QXB10jz2fCCI63OSMBKPqnbTwAM2qJ6x8km6HCJzdIYLY138kdGGIMa0a96?=
 =?us-ascii?Q?VcSt5g9+RLfBRX42WU0uqv8xWVi5CjV5MuMgg4gYwgE77bsF9iCbwbkBTtZz?=
 =?us-ascii?Q?TysKEwf388Q475QDVPA88vNSC9GCv5SRLQGdRfl+EMl3h3HQ5Z0opERWnbor?=
 =?us-ascii?Q?YkHG846qypz/XJr6Ud5qFzNc+Vl+bM3L+NfB60F30g42KMsxeWxBgE+3MNEC?=
 =?us-ascii?Q?IUsuU4YqopR/xsnZQh7IaKhu3zP5VM3jGoznXPwFN44iBjdG8xp8lC2+01bS?=
 =?us-ascii?Q?jYVnaIUZ26aKuDFNMy6KSlo84Gj1ommYnln5XsRsTyv70GUj7YT9+pReoxSO?=
 =?us-ascii?Q?D1ccrP3eBCYDeS8Mz3Mf5CVrMZxxBzbW22g7axq+/J0RGlCOQoBvacF0StPn?=
 =?us-ascii?Q?QPS0wvyY0T7DigGVE+x+wpVo+6i7pJrATDeGm3p/stEyaHdiNtqQO7RTHjCQ?=
 =?us-ascii?Q?s7/+fN5th5V6eeRlr4CIgeygYSJWz9HUZSg1D6BcwFH3en6R9ULtkjtYPE6l?=
 =?us-ascii?Q?t4EL/X9/iPwocW+DYz8Tb5mjyFARlLii2Xo4XHhdOtlgKCkUNniRXYA0gvAU?=
 =?us-ascii?Q?1o4woMDkNnP8zhoRKRcjh17LLTEiFXG4i/t1bGJYtaOLUDs0WpeqJEVUeUEs?=
 =?us-ascii?Q?9aS3wKFvh5HgFb3t3n7RBUQDZhNsbaj6EVHKdJqdmsRMh0iPIbFlRHqOFYP3?=
 =?us-ascii?Q?AU/OOVyPTN5js5HbH0E4tq24WfowlG/drnlE4Tfrrian02ShP+jr1mlE0BQ+?=
 =?us-ascii?Q?b4n5ZRrfpxnMDzRagIBi2ZMALxJkZz7HNGIf2xGZDlYvZOGAZtEZeeN4xDFl?=
 =?us-ascii?Q?Jd+2tWCOEdfowPhIRSiQo5EjcyGgCcyUMl+oDVAFO8NL/LZzGGXZNFgnaa2w?=
 =?us-ascii?Q?hO6evGaa/zPbEAlaIZoalZd0S6JXFLgrbL4y27XnFnqlePOBaI+NdKInPVIG?=
 =?us-ascii?Q?baG/5FcF6wWy7/nQZtL10vLFGtKRQNmB603CYEsJ?=
X-OriginatorOrg: phytec.com
X-MS-Exchange-CrossTenant-Network-Message-Id: 2498939b-99fd-49d6-f4b5-08dbf5185473
X-MS-Exchange-CrossTenant-AuthSource: SJ2PR22MB4354.namprd22.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Dec 2023 22:28:24.9613
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 67bcab1a-5db0-4ee8-86f4-1533d0b4b5c7
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: xnpgcFvB+BQtaCSuN/5+6vrnRwYePwTcrlM/yvRhLq8CtjvzQK4Ua66T3ST9eK7cx9V+XHoUBkCPTrnGTHsgKQ==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH2PR22MB1912
X-Spam-Status: No, score=-0.8 required=5.0 tests=DKIM_SIGNED,DKIM_VALID,
	HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,SPF_HELO_NONE,
	SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no
	version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on groat.vger.email
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (groat.vger.email [0.0.0.0]); Mon, 04 Dec 2023 14:28:46 -0800 (PST)

The DSS outputs DPI signals via its second video port (VP2). The DPI
output from DSS is 24 bits (RGB888) and is forwarded to an HDMI
transmitter (SIL9022) on the board.

Add pinmux for DSS DPI output and HDMI Interrupt.

Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector
on the phyBOARD-Lyra.

Additionally, connect the output of DSS (VP2) with input of the HDMI TX,
and the output of HDMI TX to the input of the HDMI connector.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
---
 .../dts/ti/k3-am625-phyboard-lyra-rdk.dts     | 94 +++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index 171354b13e33..81319d68b624 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -35,6 +35,18 @@ can_tc1: can-phy0 {
 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -93,6 +105,37 @@ AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
 		>;
 	};
 
+	hdmi_int_pins_default: hdmi-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
@@ -184,6 +227,26 @@ cpsw3g_phy3: ethernet-phy@3 {
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI/HDMI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &main_i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
@@ -207,6 +270,37 @@ gpio_exp: gpio-expander@21 {
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_int_pins_default>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
-- 
2.25.1