Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.36 as permitted sender) client-ip=23.128.96.36;
From:   Randy Dunlap <rdunlap@infradead.org>
To:     linux-kernel@vger.kernel.org
Cc:     Randy Dunlap <rdunlap@infradead.org>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Jessica Zhang <quic_jesszhan@quicinc.com>,
        Sam Ravnborg <sam@ravnborg.org>,
        Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
        Maxime Ripard <mripard@kernel.org>,
        Thomas Zimmermann <tzimmermann@suse.de>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        dri-devel@lists.freedesktop.org
Subject: [PATCH] drm/panel: re-alphabetize the menu list
Date:   Wed,  6 Dec 2023 22:22:33 -0800
Message-ID: <20231207062233.5318-1-rdunlap@infradead.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/panel/Kconfig |   90 ++++++++++++++++----------------
 1 file changed, 45 insertions(+), 45 deletions(-)

diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -95,34 +95,6 @@ config DRM_PANEL_LVDS
 	  handling of power supplies or control signals. It implements automatic
 	  backlight handling if the panel is attached to a backlight controller.
 
-config DRM_PANEL_SIMPLE
-	tristate "support for simple panels (other than eDP ones)"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on PM
-	select VIDEOMODE_HELPERS
-	help
-	  DRM panel driver for dumb non-eDP panels that need at most a regulator
-	  and a GPIO to be powered up. Optionally a backlight can be attached so
-	  that it can be automatically turned off when the panel goes into a
-	  low power state.
-
-config DRM_PANEL_EDP
-	tristate "support for simple Embedded DisplayPort panels"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on PM
-	select VIDEOMODE_HELPERS
-	select DRM_DISPLAY_DP_HELPER
-	select DRM_DISPLAY_HELPER
-	select DRM_DP_AUX_BUS
-	select DRM_KMS_HELPER
-	help
-	  DRM panel driver for dumb eDP panels that need at most a regulator and
-	  a GPIO to be powered up. Optionally a backlight can be attached so
-	  that it can be automatically turned off when the panel goes into a
-	  low power state.
-
 config DRM_PANEL_EBBG_FT8719
 	tristate "EBBG FT8719 panel driver"
 	depends on OF
@@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
-config DRM_PANEL_SAMSUNG_LD9040
-	tristate "Samsung LD9040 RGB/SPI panel"
-	depends on OF && SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	select VIDEOMODE_HELPERS
-
 config DRM_PANEL_LG_LB035Q02
 	tristate "LG LB035Q024573 RGB panel"
 	depends on GPIOLIB && OF && SPI
@@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
 	  with the Magnachip D53E6EA8966 panel IC. This panel receives
 	  video data via DSI but commands via 9-bit SPI using DBI.
 
+config DRM_PANEL_MANTIX_MLAF057WE51
+	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Mantix
+	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+	  has a resolution of 720x1440 pixels, a built in backlight and touch
+	  controller.
+
 config DRM_PANEL_NEC_NL8048HL11
 	tristate "NEC NL8048HL11 RGB panel"
 	depends on GPIOLIB && OF && SPI
@@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016
 	  Say Y here if you want to enable support for the panels built
 	  around the Novatek NT39016 display controller.
 
-config DRM_PANEL_MANTIX_MLAF057WE51
-	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y here if you want to enable support for the Mantix
-	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
-	  has a resolution of 720x1440 pixels, a built in backlight and touch
-	  controller.
-
 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
 	tristate "Olimex LCD-OLinuXino panel"
 	depends on OF
@@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430
 	  DB7430 DPI display controller used in such devices as the
 	  LMS397KF04 480x800 DPI panel.
 
+config DRM_PANEL_SAMSUNG_LD9040
+	tristate "Samsung LD9040 RGB/SPI panel"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6D16D0
 	tristate "Samsung S6D16D0 DSI video mode panel"
 	depends on OF
@@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015
 	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
 	  the host, a built-in LED backlight and touch controller.
 
+config DRM_PANEL_EDP
+	tristate "support for simple Embedded DisplayPort panels"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	select DRM_KMS_HELPER
+	help
+	  DRM panel driver for dumb eDP panels that need at most a regulator and
+	  a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_SIMPLE
+	tristate "support for simple panels (other than eDP ones)"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	help
+	  DRM panel driver for dumb non-eDP panels that need at most a regulator
+	  and a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
 config DRM_PANEL_TDO_TL070WSH30
 	tristate "TDO TL070WSH30 DSI panel"
 	depends on OF