Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Mario Limonciello <mario.limonciello@amd.com>,
        Jarkko Nikula <jarkko.nikula@linux.intel.com>,
        Herbert Xu <herbert@gondor.apana.org.au>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Wolfram Sang <wsa@kernel.org>,
        Andi Shyti <andi.shyti@kernel.org>, linux-i2c@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Mika Westerberg <mika.westerberg@linux.intel.com>,
        Jan Dabros <jsd@semihalf.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Serge Semin <fancer.lancer@gmail.com>
Subject: [PATCH v5 21/24] i2c: designware: Use pci_get_drvdata()
Date:   Thu,  7 Dec 2023 16:14:01 +0200
Message-ID: <20231207141653.2785124-22-andriy.shevchenko@linux.intel.com>
In-Reply-To: <20231207141653.2785124-1-andriy.shevchenko@linux.intel.com>
References: <20231207141653.2785124-1-andriy.shevchenko@linux.intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use the wrapper function for getting the driver data using pci_dev
instead of using dev_get_drvdata() with &pdev->dev, so we can directly
pass a struct pci_dev. This is a purely cosmetic change.

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20231120144641.1660574-22-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 2c7bc7dc8e44..211d8279b05e 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -102,7 +102,7 @@ static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
 
 static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
 	switch (pdev->device) {
 	case 0x0817:
@@ -152,7 +152,7 @@ static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev)
 
 static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
 	dev->flags |= MODEL_AMD_NAVI_GPU;
 	dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
-- 
2.43.0.rc1.1.gbec44491f096