Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:4 as permitted sender) client-ip=2620:137:e000::3:4;
Date:   Thu, 7 Dec 2023 20:30:42 +0200
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Petre Rodan <petre.rodan@subdimension.ro>
Cc:     linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
        Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Angel Iglesias <ang.iglesiasg@gmail.com>,
        Matti Vaittinen <mazziesaccount@gmail.com>,
        Andreas Klinger <ak@it-klinger.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Subject: Re: [PATCH v8 2/2] iio: pressure: driver for Honeywell HSC/SSC series
Message-ID: <ZXIPUphL8ZEYDQxk@smile.fi.intel.com>
References: <20231207164634.11998-1-petre.rodan@subdimension.ro>
 <20231207164634.11998-2-petre.rodan@subdimension.ro>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20231207164634.11998-2-petre.rodan@subdimension.ro>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
Precedence: bulk

On Thu, Dec 07, 2023 at 06:46:29PM +0200, Petre Rodan wrote:
> Adds driver for digital Honeywell TruStability HSC and SSC series
> pressure and temperature sensors.
> Communication is one way. The sensor only requires 4 bytes worth of
> clock pulses on both i2c and spi in order to push the data out.
> The i2c address is hardcoded and depends on the part number.
> There is no additional GPIO control.
> code is now based on iio/togreg

There is room to improve, but I think it's good enough to be included and
amended later on if needed.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko