Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Marcelo Schmitt <marcelo.schmitt@analog.com>
To:     <apw@canonical.com>, <joe@perches.com>, <dwaipayanray1@gmail.com>,
        <lukas.bulwahn@gmail.com>, <paul.cercueil@analog.com>,
        <Michael.Hennerich@analog.com>, <lars@metafoo.de>,
        <jic23@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
        <dan.carpenter@linaro.org>, <marcelo.schmitt1@gmail.com>
CC:     <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 03/13] iio: adc: ad7091r: Set alert bit in config register
Date:   Thu, 7 Dec 2023 15:38:53 -0300
Message-ID: <e392ad7b78c1d6244f605f4de2755b1adf3ab2ec.1701971344.git.marcelo.schmitt1@gmail.com>
In-Reply-To: <cover.1701971344.git.marcelo.schmitt1@gmail.com>
References: <cover.1701971344.git.marcelo.schmitt1@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
 drivers/iio/adc/ad7091r-base.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
index 0f192fbecbd4..6056a66d756c 100644
--- a/drivers/iio/adc/ad7091r-base.c
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -28,6 +28,7 @@
 #define AD7091R_REG_RESULT_CONV_RESULT(x)   ((x) & 0xfff)
 
 /* AD7091R_REG_CONF */
+#define AD7091R_REG_CONF_ALERT_EN   BIT(4)
 #define AD7091R_REG_CONF_AUTO   BIT(8)
 #define AD7091R_REG_CONF_CMD    BIT(10)
 
@@ -232,6 +233,11 @@ int ad7091r_probe(struct device *dev, const char *name,
 	iio_dev->channels = chip_info->channels;
 
 	if (irq) {
+		ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
+					 AD7091R_REG_CONF_ALERT_EN, BIT(4));
+		if (ret)
+			return ret;
+
 		dev_set_drvdata(st->dev, iio_dev);
 		ret = devm_request_threaded_irq(dev, irq, NULL,
 				ad7091r_event_handler,
-- 
2.42.0